I'm in the UK (North of England).. and looking for a Raspberry Pi Compute Module 5 Lite 16GB for a project. But wow those prices now!!
So as I have an unused Raspberry Pi 5 16GB, I was wondering given the crazy prices if anyone had a spare CM 5 Lite 16GB who would want to swap for my Raspberry Pi 5 16GB??
If you do and are in the UK let me know and lets do a swap :)
I'm in the UK (North of England).. and looking for a Raspberry Pi Compute Module 5 Lite 16GB for a project. But wow those prices now!!
So as I have an unused Raspberry Pi 5 16GB, I was wondering given the crazy prices if anyone had a spare CM 5 Lite 16GB who would want to swap for my Raspberry Pi 5 16GB??
If you do and are in the UK let me know and lets do a swap :)
Late to this group, just purchased a pair of the BQ16s (bundled together). I've removed what I thought were just stickers to invite me to download the Asus app for setup (which I already have on my phone). But I've read that one of the stickers is saying which node to setup first..
Is there a way for me to tell which I should power on first? I assumed both units were identical so I'd set the router up 1st and then the 2nd unit would be my mesh unit.
Have they already prepped / paired them in the factory to some extent?
New Rosin vape cart showing "no atomizer" no matter what I try. I've tried the cart on 3 diff Yocan units with 3 known good working 510 adapters. I also bought some new replacement Yocan 510 adapters from Amazon and still the same error (all adapters work on 2 other carts I have).
I've tried some of the suggestions when searching for a solution online, cleaned all contacts both on the cart and inside the Yocan with ISO (though they are are and were clean with no leaked sticky resin etc. Tried slightly loosening (and tightening) the adapter when screwing on to the cart which still does nothing.
Now this isn't any real issue, my pharmacy replaced the cart very quickly (so shout out to Alterna for sorting that easily). They have said to just keep the faulty cart for a period of 4 weeks in case they want to check it returned to test etc.
So if the cart doesn't need to go back, throwing it in a bin sounds like sacrilege to me (being a tight Yorkshireman) :)
So if any fellow tight northerners think it could be saved and let me know what to try then please let me know :)
if not then I'll bin it after a couple more weeks.
Ok to let folks know about my Pen-F being for sale? Please delete if not mods.
Gutted to have to sell, but needs must.. it's mint, boxed, with 17mm 1:1.8 lens, flash, battery and charger etc. Shutter count 823. Uk seller with 100% feedback. Priced according to condition and accessories.
Hello everyone, I'm new here so take it easy on me :) I just stumbled on this sub because I had been looking online to see if a couple of packs of Stussy Marvel trading cards I've had in a drawer since around 2011 are collectable at all (I got the packs with some Stussy Marvel tees I purchased from Stussy online).
I then went down a small rabbit hole of Topps Marvel Chrome 2026 content which was then obviously suggested because of my Stussy Marvel searching.. as a fan of Marvel and collecting I do really like the artwork on many of these new Topps cards.. and I wondered is it worth collecting these cards for what their value may become? or is it just a plain and simple case of collecting what you can just for the hobby aspect?
I just wondered how these Topps cards in previous years have performed in the vale / collectability stakes? Thanks for reading (:
Hi, I've seen the RC2 controller linked below on EBay which states it has an account "bound to it". Would I be correct in saying that if I were to purchase the EBay RC2 to use with my NEO2 (I only have the bundled RC3 which has no screen currently being used). Then I could use it as long as I did a factory reset on the EBay RC2? Any advice appreciated.
Can anyone recommend any 3D printable items they have printed and used? I’m sure I saw a YT video where the guy had been sent some 3D printed items which made the controllers a better fit for his hands..?
So if anyone has any good 3D prints to point me at then please do reply.
Legion Go Z2.. an adapter isnt required? is that correct?
"Lenovo Legion Go 2 uses an M.2 NVMe SSD. Specifically, the stock internal slot is designed for the compact 2242 form factor, but the device includes an adapter or bracket that allows you to install the larger, standard 2280 form factor"
The eagle has landed, I’m going in boys! 🤓
Fits like a glove, used the right angled USB C print file from Bambu Maker World using my P2S printer (link below if interested). Waddya think?
3D print file > https://makerworld.com/models/2788119?appSharePlatform=copy
I mainly have made the purchase for gaming.. behemoth gaming pc (RTX5090, ROG Maximus Z890 Extreme mobo etc), Steam Deck, Switch 1 & 2, XBOX Series X and PS5 Pro..
I've seen photo's of the RN P4's connected directly to the Steam Deck USB-C port.. my quick question is does that port provide power / enough power? Or would they be used with the Steam Deck docked? so the dock will have the 65W (or whatever) powering it? TY
Hello everyone, I'll keep it short. I'm a new FF XIV Online player (downloading the game data as I type). I came from 20yrs of WoW after reading so many great things about FF XIV and it's amazing community, and thought this game and it's storytelling sound perfect.
So as a solo player with no IRL friends who play FF XIV (or WoW come to that). I wondered are there any groups / discords etc where I can join to try and find some in game friends to go on the journey with? I'm UK based if that helps with time zones etc.
Thanks for reading and i hope to meet some of you in game one day :)
Hi everyone, I’m looking to snag a Legion Go Gen 2 in the uk. Is the £1050.00 price good? Or should I find the “extreme” version which is more expensive..
Any recommendations for great breakfast lunch dinner spots in Antalya old town area?
I’m only there for a couple of days so hopefully I can get a few good recommendations from the group.
Ty