u/thetruekingofspace

Here ya go. I haven't been able to test this print myself, but it should work. It will fit (even on a Bambu Lab A1 Mini.

https://www.thingiverse.com/thing:7379444

I was asked if I could make a version of this that would accomodate a panel that isn't epoxied together, so I followed the Chameleon's lead and altered the middle pieces to have two heatsets instead of one so that a split panel could be printed on a smaller printer.

Cheers you magnificent people you.

https://www.thingiverse.com/thing:7379413

The Huevos Puncheros has been due for a refresh for a long time.

This is a stick that can be printed on one plate and cut from one 3mm thick acrylic sheet. The panels are also small enough to print on a 256mm bed (barely).

It also uses less hardware and has a magnetic bottom like its big brother the Brawlbacoa.

Files will be made available soon for free on Thingiverse.

Now that I have figured out Kicad and milling prototype PCB’s on the Cubiko CNC machine, I have finally succeeded at making my own buttons. The design allows for the use of injection molded caps too (like those found in Gamefingers, PWS, and Sitong buttons).

I ordered 100 PCB’s and when they get here we’re going to build a full leverless and put them through their paces.

Holy shit. This thing turned out better than I expected.

This version I have perfected the sealing and liquid filling process.

I gave up on using glitter and now I have a clear top with distilled water dyed with pigment ink.

I have also torture tested other prototypes with drop tests on concrete both by itself and on a lever. And the only time it broke was when it yeeted it into the ground at mach 2 and the ground parried it.

But honestly I am beside myself. I didn’t know if it would be possible. Now I need an enclosure to put this in.

Coming up, figures suspended in fluid, and some other fun ideas (like hearts floating in a glycerine and water mixture).

With token generators this would just be silly.

Edit: I think I completely misunderstood the definition of bad. I just figured that this would be unlikely to happen.

I’m stupid and thought “it would be cool to have a liquid core bullet top”.

And so far, somehow I have done it.

Crazy thing is, I can drop it on concrete and it doesn’t explode. I had to yeet it into the ground like Yamcha for it to break.

Anyways, stay tuned. I’m going to make a Miku snowglobe topper. I’m probably going to fill one with Monster too just to see the bacteria show.

If this really happens I will draw Tomar eating tree stars.

Poyo poyo poyo poyo. Poyo poyo poyo poyo poyo, poyo poyo poyo! <(^o^<)

Poyo poyo poyo poyo poyo poyo. Poyo poyo poyo poyo poyo poyo poyo poyo, poyo poyo poyo? Poyo poyo poyo poyo.

Poyo.

Poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo. Poyo poyo poyo poyo poyo poyo poyo poyo poyo. Poyo poyo poyo! (>^o^)>

Poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo poyo.

Edit: Poyo.

Edit 2: POYO.

Edit 3: <(^o^<) poyo poyo poyo poyo poyo poyo poyo.

Artwork by https://x.com/scars4snacks?s=21

Aren’t UV printers cool?

I figured it was about time I get to keep one.

I can do UV printing now :3. It turned out really well!

The redesign of the JunkDawg and Marlene are done. They are easier to assemble and print, more sturdy than ever, and use even less hardware than they did before.

These are going off to their homes tomorrow.

I’m driving myself mad. Every article I read says this stuff didn’t exist past the 60’s, but I know I had it a lot. In plastic 2 liter bottles no less.

Please tell me I’m not crazy.

It had the logo you see on this older bottle.

I just redesigned the JunkDawg yet again to make it easier to print and assemble. It also uses less hardware.

Next up I am redesigning parts of the Marlene (Ino Guitar Controller).