u/xqtioner

Hello,

I recently purchased 3-in-1 bundle from MC - 250K Plus, Corsair Vengeance RGB 2x16GB 6000MHz CL36(CMH32GX5M2M6000Z36), ASUS Z890 AYW Gaming Wifi W for my new PC.

Unfortunately, it won't let me enable any XMP profiles at all, I either get BSOD or black screen. Only default JEDEC speeds seem to be stable.

I've updated BIOS to the latest version(v3211) as well as tried all 3 XMP profiles(XMP 1, XMP 2, XMP Tweaked) but none of them seem stable to even boot into Windows(I'm running fresh install, only updated drivers so far). Also tried setting just frequency to 6000MHz and VDD and VDDQ to 1.35V as well as settings primary timings to advertised, frequency to 6000MHz, DRAM frequency ratio to 1:2 and both voltages to 1.35V.

RAM sticks are in a correct position (A2 and B2) and pins were not damaged during installation I think.

I was wondering if anyone has run into this issue with this bundle or anything similar and managed to fix it.

Thank you.

Hello,

I recently purchased 3-in-1 bundle - 250K Plus, Corsair Vengeance RGB 2x16GB 6000MHz CL36(CMH32GX5M2M6000Z36), ASUS Z890 AYW Gaming Wifi W for my new PC from Microcenter.

Unfortunately, it won't let me enable any XMP profiles at all, I either get BSOD or black screen. Only default JEDEC speeds seem to be stable.

I've tried updating BIOS to the latest version(v3211) as well as trying all 3 XMP profiles(XMP 1, XMP 2, XMP Tweaked) but none of them seem stable enough to even boot into Windows(I'm running fresh install, only updated drivers so far).

I was wondering if anyone has run into this issue with this bundle and managed to fix it.

Thank you.

Hello,

I recently purchased 3-in-1 bundle - 250K Plus, Corsair Vengeance RGB 2x16GB 6000MHz CL36(CMH32GX5M2M6000Z36), ASUS Z890 AYW Gaming Wifi W for my new PC.

Unfortunately, it won't let me enable any XMP profiles at all, I either get BSOD or black screen. Only default JEDEC speeds seem to be stable.

I've tried updating BIOSto the latest version(v3211) as well as trying all 3 XMP profiles(XMP 1, XMP 2, XMP Tweaked) but none of them seem stable to even boot into Windows(I'm running fresh install, only updated drivers so far).

I was wondering if anyone has run into this issue with this bundle and managed to fix it.

Thank you.

Hello,

I have a Legion 5 2021 - 15ITH6H (Type 82JH) which was having some issues with bluetooth(I had no toggle to turn it on or off in Windows). Tried updating Wi-Fi + bluetooth drivers but it didn't help.

After that, I went for an EC reset(pressing power button for 60 second ups) and now unfortunately laptop does not boot. When I press the power button, keyboard backlight comes on, light inside the power button is on as well as charging indicator light, fans also spin, but I get black screen and caps lock light is not responsive when pressing it.

I tried EC reset again, disconnected battery from the laptop, removed RAM sticks and tried to boot up the laptop with 1 stick of RAM only, even tried with no sticks of RAM at all, did CMOS clear by disconnecting battery and CMOS cable on the left side near the SSD and waiting like an hour until trying to boot up the laptop again, still the issue is the same.

Is there anything I can do by myself without having to send the laptop to a local technician or a Lenovo service center? I feel like it cannot be a hardware issue, since it only started after I did the EC reset.

Thank you in advance for any help.