u/BiggyIrons

If you’re like me, you’ve been looking for a good way to mount a laser to your SCAR but found it to be somewhat difficult. The reciever is too tall to reach the button ontop of the LAM with a normal firing grip so you try and use a pressure pad but the reciever is also too short to mount both on the top rail, especially if using a an LPVO or red dot magnifier combo and if I mounting it on the left side of the gun my hand would ND my light/laser all the time. I tried to mount the LAM on the side rail and the pressure pad on top but this only worked if I use a vertical grip. Since Im trying out not using a vert grip i found thag i fouldnt grip the gun well since the LAM now makes the reciever too wide.

After getting some inspiration from the VLTO SCAR handguard I figured I could get an offset pic rail mount and move the pressure pad off the side rail and up the gun a little. I looked at the options and found these cheap TruGlow offset mounts that both push the pressure pad up enough to clear my normal firing grasp, but also keep them nice and tucked into the rifle. I needed two for my IRIS-4 pressure pad but and I did have to reverse my PMM sling QD to push both far enough forward to keep my charging handle clear but otherwise it’s pretty slick. I just need to paint over the truglow logo

TLDR: TruGlow offset pic rail mounts put your LAM pressure pads in a really nice position to active with a normal firing grasp

Gun wall from gallow tech. Half the guns here are still in some sort of WIP.

M27 w/RWK upper (RWK in WIP for proper length handguard and CH handle)

M18 pistol with M17 optic

M7 rifle

M17 pistol

USMC Recon M4 (In WIP for LaRue LT101 riser, probably won’t get thr razor 1-6 and will stick with the strike eagle)

Colt M45A1

M16A4

M9 pistol (on the work bench, waiting on wall mount)

USMC SAM-R early prototype (In WIP for a KAC M4 front sight and Harris bipod, also not the right scope but fuck finding the right one)

M16A2 w/M203

M16A1

I’ve taken a creative liberty here and there with some of the optics just due to cost/availability. Eventually I’d like to get the proper optics but for now I’m okay with the ones I’ve substituted.

One for every occasion. The only thing Im missing is a can for the 20, thinking of getting the AEM M24 reflex suppressor.

My SCAR 16 11.5" SBR with the trusty Polo K

https://talkoftitusville.com/2026/07/01/former-police-hall-of-fame-property-in-titusville-sold-for-10-95-million-amid-financial-cleanup-and-investigations/

This was an old police hall of fame with an attached indoor range. Wonder what they're cooking up

I have access to all the available ammo types less the AP ammo (which I’m trying to get my hands on) so I’m going to be doing some testing and see if what folks say about the rifle is true. What questions regarding the rifle would you like answered?

SCAR 20 in 6.5CM w/vortex 6-36 (I want to get an AEM-M24 over the barrel suppressor for it)

SACR 17 in .308 w/ a 14.something inch pin and weld barrel, 1-8 VCOG SCO, Midwest quad rail expension, surefire light, and hux flow 7.62

SCAR 16 in 5.56 w/ 11.5” barrel, 1-6 VCOG with RCR, holosun IRIS-4, and OCL Polo K in a liberties defense wrap

SCAR 15 in .300blk w/Sig 4T-pro, SC stock, surefire light, and surefire SBS 300

Not only was the rail installed so crooked it almost made contact with the gas regulator, but there’s some Last Ditch WW2 Era Rifle levels of machining marks on the BCG. For a $4,000 rifle, and what’s being issued to our troops, this is pretty pathetic. Luckily I was able to fix the rail but I’m just going to have to ignore the amateur levels of machining on that BCG.

This is the 6.8 spear with a 13” barrel and it’s basically identical to what’s being issued to the Army. Sig QC strikes again

Just got the M7 in today. Folks at the LGS where very interested in it and made me shoot it for them to see how it was lol. I only shot brass case ball ammo but it was very pleasant and mild recoiling but I have some higher pressure ammo I’m going to try out tomorrow. I’m going to do some A/B comparisons between it and my IAR but I’m pretty sure we all know who made the better choice.

Spear is a .277 and a 13” barrel factory SBR with the 6.8 specific suppressor

IAR is a HK MR27 with all the correct fixins

A fun little spair parts clone I put together. Inspiration is the M16 used in the show For All Mankind and also the “Moon’s Haunted” meme. Only part that Thags not super correct is the stock has a big ugly Ruger logo and the upper I used is a C7 upper and not an A1 since that’s what I had laying around.