I want to make a pin cushion, and went down a bit of a rabbit hole with different ways to sharpen pins. So, is there any difference between emery sand as opposed to regular sand? Is it the size/grit that makes the difference? I also saw walnut shells get used, so is there a different between sand and wood? Just curious.
So a month or so back I replaced my regular 3ds battery with a 5000mAh battery, to give it a longer play time. I actually got to use it a couple days back and tried charging it with my regular dsi charger...no luck. I figured that the charger just didn't work, but I tested it on the dsi with the unchanged battery and it worked just fine. So my guess is that I need to get a new charger with a higher wattage? Basically my question is, do I stick with Cameron Sino and get their charger or do I get a different one (the secret third option is downgrading my battery and completely giving up on life ಥ‿ಥ) ?
I've had my YCCTEAM Wireless Controller for roughly four years, and it always connected no problem. I don't use the controller often so I don't get how it's not connecting. I've reset both my switch and disconnected all previous controllers (which was only this one). My switch is up to date, and frankly I don't know how else to connect it. This is supposed to be the way to connect it, but as shown it just flashes the lights.
I've had my Q20's for a couple of months now and I've run into a problem I never expected. My headphones for whatever godforsaken reason is refusing to connect to my Chromebook. What I mean by this is that it'll have a stable connection for about fifteen-twenty seconds(I'm able to hear audio, see it connected on the settings and everything), then it'll just disconnect. I've tried virtually everything, and it doesn't act this way on my phone. I've tried resetting my headphones, resetting my laptop(even power washing it), turning both devices on and off, trying to connect it while fully charged, E V E R Y T H I N G . The thing is that my Chromebook can and has connected to other Bluetooth headphones without a problem, which is what's so confusing to me. If it's simply just a incompatibility issue, then it definitely should've been advertised as such. But I really don't know what else to do.
I'm pretty beginner at sewing, and these leg warmers have been on my mind for YEARS. Problem being that I wouldn't know were to start with sewing this. The leg warmers have a sort of drapery look to them, and it looks like there's a fabric piece under the tiered lace, so is it just a triangle pattern with some elastic???