Apologies for upside down video. So finally printed off some cf yeet sheets for my alloy and for the most part they work. However, semi does not work at all unless i slowly close the bolt. And im at my whits end with it tbh because I cannot thing of a single thing that would make semi not work 100% especially given that I put said cut trigger in other firearms and it works fine.
So what did you guys use to file down the inside of the tube? Because no matter what i do my ar9 bcg will not go completely through the whole tube even after I did some of the burrs. Is there anything long enough to file down the inside of the tube or nah?
So far this thing came out really nice ngl shout out to u/ConsequenceContent85 for making this. Will be at the range Friday to test it
As the video shows the can on my 10.5" ar9 SBR using it 147gr blazer clean suppressor ammo. Stupid quiet experience 10/10 would recommend.
so i figured i'd make an update on my deagle i posted over a year ago and i'll be honest i was a bit afraid since i've watched people on youtube shoot this hand cannon. But, after i brought it out and shot 50ae for the first time ever. i gotta say it's not as bad as i intially thought. don't get me wrong it is spicy but to me the 50ae felt like a spicier 40s&w. and my wrists didn't really hurt at all. all i know is i want to shoot it more
Hey all so I decided to do a follow up let you all know that if you are interested in trying the 3 position ak I very much recommend the new style here. As i tried it with my standard ak trigger that came with my psa rifle and it functions perfectly though I will mention i did have to file away some of the cam as it was stopping the bolt from going all the way back.
So here's basically what I did with pictures and a video since I forgot on the other post. Btw this was done a in psa gf3
attempted to do a 3 position ak with the printed ak trigger in the original ssak pack and i got it to work with the 3 position jig
so got a db alloy build and i decided to try out the rear trunnion to do the yeet sheet on my build. issue is ive broken 2 pa6 rear trunnion inserts where the brace rail goes. frankly i think its a pretty big weak point there. so im gonna try printing the insert out of pla and go from there.
Edit. Sorry forgot the pics of it
So finally gonna get around to trying to do a 3 pos ss and so far i have the safety ordered but im having issues finding a 5mm disconnector as thats the size of my psa ak's axis pins. So my question is does one exist or can I use a sleeve for it to take some of slop out of it?
So finally gonna get around to trying to do a 3 pos ss and so far i have the safety ordered but im having issues finding a 5mm disconnector as thats the size of my psa ak's axis pins. So my question is does one exist or can I use a sleeve for it to take some of slop out of it?
So I'll start here. A couple weeks ago i had a wedding i attended that was 3.5 hours to and from. My car was running fine like it normally was. Fast forward to a couple days ago i let my mom borrow my car because hers needed to be fixed (again). So she texts me its on the side of the road and she describes it refusing to go above 25mph. So after I get my code reader. Tells me its a bad o2 sensor, no problem I replace now it does go over 25 but now it jerks a bit trying to accelerate and i tried the code reader again and it said 0-dic with a yellow light. So then we take to a shop they look at it and tell me my front cat is bad and that its gonna be $1520 to fix it. So idk if it really is the cat since I know usually you get a rotten egg smell with one but i didn't get any of that when it happened. If anyone knows what it could be let me as I plan on later taking to it different mechanic for a second opinion
Anybody here know if the carl has gotten better? I was looking at these for my m16a2 clone and looked away because I didn't hear good things about it. So I figured I'd ask if they got better
So my q1 has recently started doing this. Where when I start a print it does its normal drop filament and wipe part but then its just stuck on this spot and idk why or how to fix it
So a question for the folks here. did polymaker always have a 1kg roll for the pa6cf20 or is that new?. ive only seen that particular roll in .5kg or 3kg.
has anyone attempted to try this with the m7? because i cut the trigger and everything but when im in ss the trigger doesnt reset. currently trying different trips but nothing worked so far
So i got this saiga a couple years ago while browsing a pawn shop. and i bought it and decided to convert it to its proper form and here it is. i just need to paint the bare metal under that plate and it it'll be fine. but let me tell you it was a PITA getting the stock on it was very tight but i got it on. now i wait til i get the 12 variant i have on layaway and do it again
Decided on the m7 version of it and idk whether or not to do a small handguard yet as I have a form 1 ftn 5 22 slim waiting
Idk what happened. was playing it a couple days ago and now i literally cant play the game on pc. It constantly keeps saying to update it but the green bar doesnt completely fill and it just keeps looping that way over and over again and idk how to fix it
So i figured I'd ask here as there's knowledgeable people about this topic. So when it comes to making my ak a 3 position frt. Can you use any trigger 9r is it like the 2 position one where you can only use a fime or alg?