u/ExplorerLoose1946

I have a 89 GT it’s a project car. We’ve never had driving. It’s got 373 diff gears. The car is completely jacked up off the ground. When we try to spin either of the rear tires, they won’t go forward and lock up. It sounds like there’s a clicking in the differential. We can spin the passenger tire backwards and it rotates the transmission and when we spin the driver side tire backwards, it spins both tires together we have the diff cover off and the diff looks good, but it’s still not allowing the rear tires to spin forward. Looking for advice or help. Thanks

I’m taking apart my 302 from my 89 GT. Was looking at going ahead and replacing the bottom end, we are crack testing the block first. but was wondering if forged internals were even worth it with still having a cast block. Looking at putting a x303 cam in and aluminum heads. Should I do anything else with that?

I have an 89 gt that is carb swapped with an hei distributor. I’m been messing with trying to get spark for the last 2 days, I’ve ensured power ground. I’ve resistance tested the coil,spark and Lu wires and the pickup coil and all tested good. When I voltage tested the pickup coil with the motor cranking it ran 0.02V periodically. I’ve seen that the gap between the teeth on the pole and on the coil could be wrong but it looks barely used. Has anyone had issues like this. Should I keep testing and replacing parts or buy a new distributor?

I’m moving close to a 10lb base weight and still have an Osprey rook 65L. Over 3 lbs. I’m wanting to get a new pack that’s sub 2 pounds or close to. I’ve been looking at the kakwa as I’ve never really considered a frameless. Here’s my question. How much can you carry comfortably in a frameless backpack. If I take new people hiking and have to carry extra is that going to make it uncomfortable? Should I just stick to a framed pack like the Durston? I just dont really know the limitations for comfort frameless packs

I’m looking to start making my own gear. I want to start with stuff sacks and eventually make a backpack. I already have a decent sewing machine and creative mindset. I’m looking for peoples advice on their favorite materials and where you buy them from and also does the thread I use matter? Any tips or things you wish you knew sooner before I jump into making gear. Thanks

Wtb ursack. Interested in any sizes