Advice and help needed with form 1
I am at a loss here and need some advice with a form 1 submission. I have an AP5 LT/T94 model that I have been trying to get approved for form 1 since 1/4. The first denial then happened on the 1/18 which was my fault. I digitally signed the form 1 which obviously is incorrect. I resubmitted on the same day with a corrected signed document. With the AP5 LT/T94 models, they do not have the model in the same spot as the other AP5 models. I had seen some people with success at submitting with N/A as the model since there wasn't a model listed on the normal spot (I later found out the model was located on the barrel on the underside). The first denial only stated the signature was wrong, so I figured this would be fine. It got denied on 3/9 for "not having the model as stamped or marked". So I investigated and found what I needed to put. So I resubmitted on 3/11 with "T94" since that is the only thing marked on the barrel. I just got the denial back on 5/14 with the statement: "Model incomplete, resubmit with photos of lower receiver".
Sorry for the long text but my question is.. do I resubmit with the same model number and this time supply a photo? I don't want to keep resubmitting and getting denied. I don't understand why they don't allow me the chance to upload a photo to validate my model or that the fact they cannot even properly look things up. The AP5 is UPPER SERIALIZED not lower. Not to mention that the LT/T94 model is engraved differently. Any advice or help would be appreciated. Do I just submit as a standard AP5? Or did I just get unlucky?