u/Inflack

Hello lads.

50/50 soil + perlite medium in 25 lt. pots. Transplanted them to their new homes a week ago.

Green Crack strain.

Can I start topping them? If so, do I cut the very top node or 1 below, as the top one isn't very developed?

Hello lads.

50/50 soil + perlite medium in 25 lt. pots. Transplanted them to their new homes a week ago.

Green Crack strain.

Can I start topping them? If so, do I cut the very top node or 1 below, as the top one isn't very developed?

Hello lads.

50/50 soil + perlite medium in 25 lt. pots. Transplanted them to their new homes a week ago.

Green Crack strain.

Can I start topping them? If so, do I cut the very top node or 1 below, as the top one isn't very developed?

Hello lads. I got the Fantastic Four 1st printing as my mystery book. Looking to trade this for another Folio Society book.

It's in pristine condition, and although it's a beautiful book, I am not a comic collector. I am located in Istanbul and am looking to trade this with another person via international shipping or locally.

Post under this or DM me if you are interested. Cheers.

Hello lads,

New grower here. I have a very narrow corridor, roughly 85 cm in width, to place my tent. Thus, I can only use the top of the tent or the 60 cm wide sides for intake/exhaust. Noise is an issue for me, which is why the fan/filter/silencer are inside the tent. I'm running AutoPot XL pots with a 70/20/10 Biobizz/perlite/bio-humus mix, which is why humidity/airflow routing matters for my setup.

Please check the images attached.

I have 2 questions:

1. Port #2 will carry the humidifier hose; Port #1 will carry cables. Both are occupied by cable/hose plus airflow. Should I open a third intake on the top panel or the opposite 60cm side to compensate?
2. Is the placement of my Ionbeam supplementary lights correct? I used aluminium tape to assist the magnet mounts.

My setup is:

• Tent 60×120×180cm
• EVO3 280W LED - main light
• x4 IONBEAM S16 - supplementary lights
• CLOUDLINE PRO 6 - inline fan 150 mm
• Activated charcoal filter 150 mm
• Pipe silencer 150mm
• x2 CLOUDRAY S6 - oscillating fans
• CLOUDFORGE T7 - humifidier
• Medium: AutoPot XL 25 LT pots, 70/20/10 Biobizz soil / perlite / bio-humus mix

Would appreciate the answers and any other recommendations from experienced growers.

Hello lads,

New grower here. I have a very narrow corridor, roughly 85 cm in width, to place my tent. Thus, I can only use the top of the tent or the 60 cm wide sides for intake/exhaust. Noise is an issue for me, which is why the fan/filter/silencer are inside the tent. I'm running AutoPot XL pots with a 70/20/10 Biobizz/perlite/bio-humus mix, which is why humidity/airflow routing matters for my setup.

Please check the images attached.

I have 2 questions:

1. Port #2 will carry the humidifier hose; Port #1 will carry cables. Both are occupied by cable/hose plus airflow. Should I open a third intake on the top panel or the opposite 60cm side to compensate?
2. Is the placement of my Ionbeam supplementary lights correct? I used aluminium tape to assist the magnet mounts.

My setup is:

• Tent 60×120×180cm
• EVO3 280W LED - main light
• x4 IONBEAM S16 - supplementary lights
• CLOUDLINE PRO 6 - inline fan 150 mm
• Activated charcoal filter 150 mm
• Pipe silencer 150mm
• x2 CLOUDRAY S6 - oscillating fans
• CLOUDFORGE T7 - humifidier
• Medium: AutoPot XL 25 LT pots, 70/20/10 Biobizz soil / perlite / bio-humus mix

Would appreciate the answers and any other recommendations from experienced growers.

Hello lads,

New grower here. I have a very narrow corridor, roughly 85 cm in width, to place my tent. Thus, I can only use the top of the tent or the 60 cm wide sides for intake/exhaust. Noise is an issue for me, which is why the fan/filter/silencer are inside the tent. I'm running AutoPot XL pots with a 70/20/10 Biobizz/perlite/bio-humus mix, which is why humidity/airflow routing matters for my setup.

Please check the images attached.

I have 2 questions:

1. Port #2 will carry the humidifier hose; Port #1 will carry cables. Both are occupied by cable/hose plus airflow. Should I open a third intake on the top panel or the opposite 60cm side to compensate?
2. Is the placement of my Ionbeam supplementary lights correct? I used aluminium tape to assist the magnet mounts.

My setup is:

• Tent 60×120×180cm
• EVO3 280W LED - main light
• x4 IONBEAM S16 - supplementary lights
• CLOUDLINE PRO 6 - inline fan 150 mm
• Activated charcoal filter 150 mm
• Pipe silencer 150mm
• x2 CLOUDRAY S6 - oscillating fans
• CLOUDFORGE T7 - humifidier
• Medium: AutoPot XL 25 LT pots, 70/20/10 Biobizz soil / perlite / bio-humus mix

Would appreciate the answers and any other recommendations from experienced growers.

Hey lads, a serious question for high-end collectors and book aficionados:

Is the craftsmanship quality of the Moby-Dick Limited Edition book worth it? Especially in comparison to other books in a similar price range by other publishers, such as Suntup Editions' or Curious King's numbered versions.

Here's what the site says about the book:

• Production Details
  • Bound in blocked leather with an inset leather whale label
  • Gun-metal foiled book edges
  • Printed in blue and black ink throughout
  • Textured paper endpapers
  • Ribbon marker
  • Housed in a clamshell box covered in blocked Coloretta cloth and lined in Suedel luxe Alaska cloth
  • Blocked leather inset label on the front board
  • Letterpress limitation label printed on Wibalin Recycled Natural Storm paper signed by Mu Pan and Michael Dirda

Thank you in advance.