u/Ioiwin

Hi all,

This is a continuation of another post. Looking for some basic information. We recently discovered a failed wax ring and after removing the toilet, I stuck a flathead screwdriver into the gap between the flange and tile. It struck some wood which crumbled (red circle) and the screwdriver definitely went onto the wood a few mm into the tip of the flathead.

I understand this could be rot. If it’s just a small area around the flange that’s rotted, would the wood still have to be replaced or would it be old to leave the wood there if the rotted area was dried out if not too large?

Thank you

Hi all,

This is a continuation of another post. Looking for some basic information. We recently discovered a failed wax ring and after removing the toilet, I stuck a flathead screwdriver into the gap between the flange and tile. It struck some wood which crumbled (red circle) and the screwdriver definitely went onto the wood a few mm into the tip of the flathead.

I understand this could be rot. If it’s just a small area around the flange that’s rotted, would the wood still have to be replaced or would it be old to leave the wood there if the rotted area was dried out if not too large?

Thank you

Hi all,

This is a continuation of another post. Looking for some basic information. We recently discovered a failed wax ring and after removing the toilet, I stuck a flathead screwdriver into the gap between the flange and tile. It struck some wood which crumbled (red circle) and the screwdriver definitely went onto the wood a few mm into the tip of the flathead.

I understand this could be rot. If it’s just a small area around the flange that’s rotted, would the wood still have to be replaced or would it be old to leave the wood there if the rotted area was dried out if not too large?

Thank you

Hi all,

This is my second rodeo. By the looks of this it looks like a second story leaking toilet in a water closet, if I’m correct? We had this happen to our other toilet in another bathroom upstairs and had a remediation company fix it thru insurance.

I think I can try to figure it out myself this time I got a good idea of what was required, however need slight guidance and best practices.

What’s the best way to take up the remaining toilet water after shutting it off? What’s the best way to take up the grout and tile, do I need one of those oscillating cutters or can I do it manually?

How much tile do I pull out? The damage doesn’t look too bad going out horizontally to the base boards but not sure of the damage going vertically.

What product do I use to kill the bacteria? Do I have to rent a dehumidifier or can I let it dry thru the use of fans?

Any information would’ve greatly appreciated! Thank you all

Hi all,

Just curious how this under mount sink is secured to the countertop. Underneath it looks like it’s nestled within some trim but do not see any screws or brackets so far.

I would like to recaulk the area in between the sink and countertop as it’s dirty and moldy. Do I have to drop the sink to do this or can I just use a caulk removal tool and re-silicone? Thank you!

Hii all, I’ve discovered this staining and wondering if it’s mold and where it is coming from. I’d say it’s gotten worse over 3 years or so, it started as one little spot. The staining is only in the one little corner above shelving in the closet, there are no other spots. I do keep my hamper in there and clothing, hats, etc. The stain does not come off trying to wipe it.

As you can see in the pictures it looks like there are a few spots on the shelf also. Directly behind the closet is a bathroom shower, however the staining in the closet is on the opposite end where the drain and tub spout are. Running a moisture meter there is 3% with the pin and almost 0% with the pad.

If this is mold can it simply be coming from the humidity of the closet since there are stains on the shelf also and there is no moisture in the drywall? Or is it coming from the space behind the tub? Would I have to cut out a square where the stains are and check the back of the drywall, or how else can I investigate the source?

Any information would help! Thank you

Hi all, I’ve discovered this staining and wondering if it’s mold and where it is coming from. I’d say it’s gotten worse over 3 years or so, it started as one little spot. The staining is only in the one little corner above shelving in the closet, there are no other spots. I do keep my hamper in there and clothing, hats, etc. The stain does not come off trying to wipe it.

As you can see in the pictures it looks like there are a few spots on the shelf also. Directly behind the closet is a bathroom shower, however the staining in the closet is on the opposite end where the drain and tub spout are. Running a moisture meter there is 3% with the pin and almost 0% with the pad.

If this is mold can it simply be coming from the humidity of the closet since there are stains on the shelf also and there is no moisture in the drywall? Or is it coming from the space behind the tub? Would I have to cut out a square where the stains are and check the back of the drywall, or how else can I investigate the source?

Any information would help! Thank you