Image 1 — s26 broken back ?
Image 2 — s26 broken back ?
Image 3 — s26 broken back ?

s26 broken back ?

hi yall...

as samsung said, this phone should be a tank itself without a cover or screen protector, but I think its not ...

I have the cover in the photo, yes 12 euro cover .

I had it for my s23 and I swear I dropped it a loooot of time, hard and not, and it never shattered or something else, just little scratch on the metal corner, nothing else.

week ago I dropped my s26 ultra accidentally with the back and it shattered as you can see in the photos.

But the weird thing is that the cracks seem to be "under" the surface.

If I touch the cracks, I can't feel anything. It's completely smooth. There's no loose glass or anything, just a tiny piece of glass that broke in the center of the cracked area..

so my question is, was it the phone or the cover?

I have also a photo behind the phone in the cover but guys i mean... its smaller than a nail, even thinner than a paper... i don't think the problem was that.

u/Mean_Champion9588 — 3 days ago
▲ 1 r/iems

kiwi ears orchestra lite

How are kiwi orchestra lite? I can buy them for 132 euros used on amazon, are they good for competitive gaming, storytelling like tlou and music with bass?. I'm mainly looking for crystal clear audio for these things listed above

u/Mean_Champion9588 — 2 months ago
▲ 1 r/iems

iem under 110

hi yall.

i searched for hour and maybe i found an answer but id love some advise thoug.

What is the best iem towards 100 euros (+-10) for gaming (online like r6 and story line like tlou) and listening to music with crystal clear sound (especially bass)?

I'm new and In the beginning i was looking at the simgot ew300 dsp, the simgot em6l are about 140 euros and are out of budget...

so i searched again at least other 2 hours and found two god pair i think.

the simgot eg280 and Juzear Defiant GameFidelity x Z Reviews.

what's your opinion of all that ?

I'm planning to buy the juzear at 99 on aliexpress considering all above here (music and comp/sing gaming)

thanks to all

reddit.com
u/Mean_Champion9588 — 2 months ago

Intel 13th/14th Gen: Just replaced CPU via RMA, but PC won't boot (Solid Yellow DRAM LED). Need help!

​

Hi everyone, I am losing my mind and desperately need some expert advice. I’ve reached a point where the math just doesn't add up.

​My Specs:

​CPU: Intel Core i5-13600K (Brand new, just arrived from Intel RMA yesterday)

​Cooler: Thermalright AIO liquid cooler

​RAM: Viper DDR5 6600MHz

​Motherboard: ASUS ROG Strix Z790-F Gaming WiFi

​The Plot Twist (The History):

This madness started about a year ago when I swapped my old cooler for this Thermalright AIO. Immediately after installing it, RAM slots A1 and A2 completely died.

​Since then, I have literally swapped everything:

​I am currently on my 3rd different motherboard.

​I changed the RAM kit.

​Yesterday, Intel sent me a brand-new factory-sealed i5-13600K via RMA.

​I put the new CPU in, mounted the Thermalright AIO, turned it on, and... still stuck on a solid Yellow DRAM debug LED. Black screen, no POST. Up until last week, the PC would at least boot if I used slots B1/B2, but as of today, even B1/B2 are completely dead. Solid yellow light no matter what.

​How is this physically possible when the Motherboard, RAM, and CPU are ALL different from when the problem started?

​What I’ve already tried:

​Clear CMOS: Pressed the button on the rear I/O panel.

​Memory Training: Left it running for 15+ minutes.

​Mounting Pressure: Loosened the AIO pump block screws significantly.

​Single Stick Test: Tried one stick at a time in A2 (and every other slot).

​I am defeated. What should my next step be? Booting it on a cardboard box outside the case with a stock Intel cooler? Changing the PSU?

​Any help would be life-saving. Thank you.

reddit.com
u/Mean_Champion9588 — 2 months ago

Intel 13th/14th Gen: Just replaced CPU via RMA, but PC won't boot (Solid Yellow DRAM LED). Need help!

​

​

Hi everyone, I am losing my mind and desperately need some expert advice. I’ve reached a point where the math just doesn't add up.

​

​My Specs:

​

​CPU: Intel Core i5-13600K (Brand new, just arrived from Intel RMA yesterday)

​

​Cooler: Thermalright AIO liquid cooler

​

​RAM: Viper DDR5 6600MHz

​

​Motherboard: ASUS ROG Strix Z790-F Gaming WiFi

​

​The Plot Twist (The History):

​

This madness started about a year ago when I swapped my old cooler for this Thermalright AIO. Immediately after installing it, RAM slots A1 and A2 completely died.

​

​Since then, I have literally swapped everything:

​

​I am currently on my 3rd different motherboard.

​

​I changed the RAM kit.

​

​Yesterday, Intel sent me a brand-new factory-sealed i5-13600K via RMA.

​

​I put the new CPU in, mounted the Thermalright AIO, turned it on, and... still stuck on a solid Yellow DRAM debug LED. Black screen, no POST. Up until last week, the PC would at least boot if I used slots B1/B2, but as of today, even B1/B2 are completely dead. Solid yellow light no matter what.

​

​How is this physically possible when the Motherboard, RAM, and CPU are ALL different from when the problem started?

​

​What I’ve already tried:

​

​Clear CMOS: Pressed the button on the rear I/O panel.

​

​Memory Training: Left it running for 15+ minutes.

​

​Mounting Pressure: Loosened the AIO pump block screws significantly.

​

​Single Stick Test: Tried one stick at a time in A2 (and every other slot).

​

​

​I am defeated. What should my next step be? Booting it on a cardboard box outside the case with a stock Intel cooler? Changing the PSU?

​

​Any help would be life-saving. Thank you.

reddit.com
u/Mean_Champion9588 — 2 months ago

Intel 13th/14th Gen: Just replaced CPU via RMA, but PC won't boot (Solid Yellow DRAM LED). Need help!

​

Hi everyone, I am losing my mind and desperately need some expert advice. I’ve reached a point where the math just doesn't add up.

​My Specs:

​CPU: Intel Core i5-13600K (Brand new, just arrived from Intel RMA yesterday)

​Cooler: Thermalright AIO liquid cooler

​RAM: Viper DDR5 6600MHz

​Motherboard: ASUS ROG Strix Z790-F Gaming WiFi

​The Plot Twist (The History):

This madness started about a year ago when I swapped my old cooler for this Thermalright AIO. Immediately after installing it, RAM slots A1 and A2 completely died.

​Since then, I have literally swapped everything:

​I am currently on my 3rd different motherboard.

​I changed the RAM kit.

​Yesterday, Intel sent me a brand-new factory-sealed i5-13600K via RMA.

​I put the new CPU in, mounted the Thermalright AIO, turned it on, and... still stuck on a solid Yellow DRAM debug LED. Black screen, no POST. Up until last week, the PC would at least boot if I used slots B1/B2, but as of today, even B1/B2 are completely dead. Solid yellow light no matter what.

​How is this physically possible when the Motherboard, RAM, and CPU are ALL different from when the problem started?

​What I’ve already tried:

​Clear CMOS: Pressed the button on the rear I/O panel.

​Memory Training: Left it running for 15+ minutes.

​Mounting Pressure: Loosened the AIO pump block screws significantly.

​Single Stick Test: Tried one stick at a time in A2 (and every other slot).

​I am defeated. What should my next step be? Booting it on a cardboard box outside the case with a stock Intel cooler? Changing the PSU?

​Any help would be life-saving. Thank you.

reddit.com
u/Mean_Champion9588 — 2 months ago
▲ 1 r/PcBuildHelp+1 crossposts

Intel 13th/14th Gen: but PC won't boot (Solid Yellow DRAM LED). Need help!

​

Hi everyone, I am losing my mind and desperately need some expert advice. I’ve reached a point where the math just doesn't add up.

​My Specs:

​CPU: Intel Core i5-13600K (Brand new, just arrived from Intel RMA yesterday)

​Cooler: Thermalright AIO liquid cooler

​RAM: Viper DDR5 6600MHz

​Motherboard: ASUS ROG Strix Z790-F Gaming WiFi

​The Plot Twist (The History):

This madness started about a year ago when I swapped my old cooler for this Thermalright AIO. Immediately after installing it, RAM slots A1 and A2 completely died.

​Since then, I have literally swapped everything:

​I am currently on my 3rd different motherboard.

​I changed the RAM kit.

​Yesterday, Intel sent me a brand-new factory-sealed i5-13600K via RMA.

​I put the new CPU in, mounted the Thermalright AIO, turned it on, and... still stuck on a solid Yellow DRAM debug LED. Black screen, no POST. Up until last week, the PC would at least boot if I used slots B1/B2, but as of today, even B1/B2 are completely dead. Solid yellow light no matter what.

​How is this physically possible when the Motherboard, RAM, and CPU are ALL different from when the problem started?

​What I’ve already tried:

​Clear CMOS: Pressed the button on the rear I/O panel.

​Memory Training: Left it running for 15+ minutes.

​Mounting Pressure: Loosened the AIO pump block screws significantly.

​Single Stick Test: Tried one stick at a time in A2 (and every other slot).

​I am defeated. What should my next step be? Booting it on a cardboard box outside the case with a stock Intel cooler? Changing the PSU?

​Any help would be life-saving. Thank you.

reddit.com
u/Mean_Champion9588 — 2 months ago