u/Mister-Grinch

The first photo is the right eye and is blurry on the bottom right of the lens. The second photo is the left lens and works fine. No amount of cleaning seems to be fixing this. This was one of the first PSVR2 units produced and got it on Day 1.

I’ve read about some losing the anti-reflective coating and thought that may be the case here. But the ridge and blur seems to be on the inside of the lens. When I lightly move my finger across the area I feel no ridge and it all feels like consistent glass.

It was starting a but rough yesterday but now not turning over at all. Before I run to get a new battery I thought I would ask here. Hoping that is all this looks like and not the starter or fuel injector. :(

Located in the northern prairies I have this stubborn weed growing in my beds and now infiltrating my lawn. Online AI advised it is wild violet and to use triclopyr. So I used the Ortho solution in the picture a week ago mixed to specs and didn’t seem to have any effect. Am I applying this to early in the hot days of summer? Or should I reapply?

My elderly parents had their modem upgraded to a new Giga brand last week following prior internet and phone outages. Bell Canada is the provider. All of their devices seems to be working including iPhones, HomePods, and internet radio. But for some reason the AppleTv (3rd Gen) just will not connect and stream content.

The AppleTV properly connects to the network, stays connected, but will not stream anything. Apps commonly will give a network not connected error when content is selected. Apparently the tech tried to connect to the wifi when he was on site and after a few attempts instead used an Ethernet cable; this solution worked for a day and then failed.

I have tried everything including:
- “Forgetting” the network on the AppleTv and reconnecting with current SSID and correct Password.
- Hard resets / reboots on AppleTv
- Hard reset / reboot of modem/router and the installed switch
- Switching from wifi to Ethernet in back of AppleTv (not preferred solution as this then eliminates the use of the HomePod).

All of their above yield the same result. The device shows connected to the network in the network options, but no internet when apps are used.

Is there anyone here who might know a little bit more about how to properly diagnose this and what changes we need to make to get the AppleTv to work again? I see others have had problems with the Bell’s new Giga modem (mostly Apple Home Kits) and apple devices and wonder if all the kinks have yet to be worked out.

I am not an expert but know my way around the basics, and this one has me stumped. Thanks.

My elderly parents had their modem upgraded to a new Giga brand last week following prior internet and phone outages. All of their devices seems to be working including iPhones, HomePods, and internet radio. But for some reason the AppleTv (3rd Gen) just will not connect and stream content.

The AppleTV properly connects to the network, stays connected, but will not stream anything. Apps commonly will give a network not connected error when content is selected. Apparently the tech tried to connect to the wifi when he was on site and after a few attempts instead used an Ethernet cable; this solution worked for a day and then failed.

I have tried everything including:
- “Forgetting” the network on the AppleTv and reconnecting with current SSID and correct Password.
- Hard resets / reboots on AppleTv
- Hard reset / reboot of modem/router and the installed switch
- Switching from wifi to Ethernet in back of AppleTv (not preferred solution as this then eliminates the use of the HomePod).

All of their above yield the same result. The device shows connected to the network in the network options, but no internet when apps are used.

Is there anyone here who might know a little bit more about how to properly diagnose this and what changes we need to make to get the AppleTv to work again? I see others have had problems with the Giga modem and apple devices and wonder if all the kinks have yet to be worked out.

I am not an expert but know my way around the basics, and this one has me stumped. Thanks.

Is this an issue with installation and root flare and/or should grass around the base be excavated? This spot on the property is low and does get a fair bit of moisture. Winnipeg, Manitoba, Canada.

My municipality in central Canada won’t do anything about the dandelions. Each year they invade more and more and my lawn seems to be weakening.

Well this isn’t good! 20 Minutes late, and everyone patiently waiting. No crowd revolts quite yet. It will suck if we have to come back another night.

They are opening for the Triumph tour

I’ve looked at online pics but have not been able to match this one perfectly to a black face and white ring.