u/Open_Translator_7237

Hi everyone!

A little standalone progress bar for my P2S 😀 It's in the basement, so checking the app constantly isn't exactly convenient ^^

Not much hardware needed, mostly repurposed parts (ESP32, WS2812 LED strips, 144 and 30 LEDs/m, some wire, PLA, and you're good to go!).

It displays the print progress for up to 10 printers on the same network (with an auto-switch feature every X seconds).

Customizable colors and brightness.

Project cost: <€20.

Feel free to ask if you have any questions.

Multijig for rotary for fiber/CO2 galvo laser.

Free STL files available on Makerworld.

Enjoy 🤙

Cute dragon 🐲

My first multicolor design 🥰

A lot of waste for a 81mm little creature 😁

19h30 of printing, 4 colors, 330g of PLA.

Bambulab P2S with AMS 2 Pro.

Design available for free : https://makerworld.com/fr/models/3002795-cute-baby-dragon-4-colors-pla#profileId-3371557

Let me know what do you think.

-----------

Ma première création multicolore 🥰

Beaucoup de déchets pour une petite créature de 81 mm 😁

19 h 30 d'impression, 4 couleurs, 330 g de PLA.

Bambulab P2S avec AMS 2 Pro.

Modèle disponible gratuitement : https://makerworld.com/fr/models/3002795-cute-baby-dragon-4-colors-pla#profileId-3371557

Dites-moi ce que vous en pensez.

New design 3mm brass

Laser engraving and UV printing for the background.

Fox design

5mm brass coin

60W MOPA / 110mm lens / 2500mms / 95% / 200ns / 900dpi / 60khz / 512passes (16bit depthmap) - 150 passes (vector)

Brass + UV epoxy resin

640 passes with 60w MOPA 110mm lens

16bit depthmap

2500mm/s

95%

200ns

900dpi

I've been working on a 3D mesh splitter tool for 3D printing.

It supports automatic grid splitting as well as manual cuts, and can generate alignment pins between parts to make assembly easier after printing.

I've been spending some time improving the pin placement so they are generated on the actual cut surfaces rather than just using bounding boxes, which gives much better results on complex models.

Still a work in progress, but it's already helping me print larger models on smaller printers.

What do you think about this module ?