u/QuantumAssassin45

Sol and Vin counters?

Is there any counter to them with one hit just decimating all your HP besides your last one? Like any modifier or upgrade you can get? Or is there a gimmick to the fight to make it easier, cause with just the single hit dropping you to one it seems like you basically have to hitless it to actually do the fight and that seems like a tough task when its two of them and they are decently fast.

reddit.com
u/QuantumAssassin45 — 4 days ago

Possible Skip/Checking if this is intended route

I have been exploring around the part past the lake in Haven, and have the Assistant doors, and noticed you can strider boost through them. I have not gone too deep in to any of them, but I assume this is not the intended method of traversing them, or if it is should I go back and do the stuff in them.

reddit.com
u/QuantumAssassin45 — 7 days ago

Finalized build/Checking with this sub about how everything will fit

Build: https://pcpartpicker.com/list/3Mxp2k

I mostly just want to make sure the case will fit the AIO and everything will be fitting properly in the case with enough clearance, I know it should fit the fans. I will be getting an ASRock B70.

Purchasing stuff in the US

Trying to keep it under $4000 but am okay if it goes a bit over if there are any greatly superior options for things like the case or RAM.

I am mostly set on the parts, but want to make sure everything will fit with current setup before I start buying anything.

reddit.com
u/QuantumAssassin45 — 8 days ago

Differences between the two B70 and which is more likely to be "reliable"?

Hello, I am just about to the point where I am beginning to purchase parts for my PC, and I am wondering the difference between the ASRock B70 and the default Intel one? I found a pretty good deal on the ASRock one, but since this is a workstation card I am struggling to find real reviews that differentiate the two in any capacity especially general reliability of the card.

The price difference is only about $100 so its not too much, but I would like to note the differences between them, the newegg comparison has them as basically the same save for their power connectors and one being "with fan" and the other "blower design".

reddit.com
u/QuantumAssassin45 — 9 days ago

Differences between the two B70 and which is more likely to be "reliable"?

Hello, I am just about to the point where I am beginning to purchase parts for my PC, and I am wondering the difference between the ASRock B70 and the default Intel one? I found a pretty good deal on the ASRock one, but since this is a workstation card I am struggling to find real reviews that differentiate the two in any capacity especially general reliability of the card.

The price difference is only about $100 so its not too much, but I would like to note the differences between them, the newegg comparison has them as basically the same save for their power connectors and one being "with fan" and the other "blower design".

reddit.com
u/QuantumAssassin45 — 9 days ago
▲ 2 r/3d6

Hello, I am currently playing a Crooked Moon campaign/adventure, and I am playing a Gnarlborn Path of Beast Barbarian (who is fateweaved as Thread of Slaughter, and I have the night stalker background / feat that goes with it.

I just got to level 3 and I am curious what options you would recommend for a Beast Barbarian in terms of feats, magic items to look out for, and general play style. Especially if it is things that provides bonuses to the natural weapon(s). General playstyle recommendations overall would be nice too, cause it feels a little bit underwhelming on paper compared to like Ancestral Guardian or Totem, or even the more normal ones of Berserker and Giant.

reddit.com
u/QuantumAssassin45 — 17 days ago

Does it work with equipment?/Does equipment count as attacks? I am playing Mul-T rn and have a DML build going with Pocket ICBM and am wondering whether getting Brilliant Behemoth is worth it/ will increase the damage of DML and pocket ICBM rockets.

reddit.com
u/QuantumAssassin45 — 23 days ago

I am looking in to getting a decent workhorse of a PC that can do both gaming and workstation loads and the dual setup for the B60 seems to be rather ideal from the surface level stuff I can find but I want to ask some questions from people who know more before I make decisions.

  1. How reliable are they/are they prone to bugs/glitches or breaking in some way
  2. Do games/can games take advantage of the dual setup vs. a singular one (I know workstation things generally can)
  3. Do they generally perform better with an Intel CPU or would it be fine with an AMD one? This one I ask specifically because the new AMD CPUs (the R9 9950X3D2 Dual Edition) look quite nice for both gaming and workstation needs
  4. How is their general gaming performance (1080p or maybe 2k because my current monitors are 1080p but may upgrade to 2k eventually). Largely for modern games on decent quality settings?
  5. Is there any article, post, or video that gives multiple and broad benchmarks of using them / specifically the dual setup.
  6. What are the thermals like under average to high loads? Is there any recommendations on how to keep temps lower?

These are most of my questions but more may arise as I browse more. I know regardless of these answers really it'd be a major upgrade to what I have now which most of my hardware is more than a decade old and was mid tier at the time. I just want to be as informed as possible when making the purchase cause it is quite expensive.~~

reddit.com
u/QuantumAssassin45 — 24 days ago

I am looking in to getting a decent workhorse of a PC that can do both gaming and workstation loads and the dual setup for the B60 seems to be rather ideal from the surface level stuff I can find but I want to ask some questions from people who know more before I make decisions.

  1. How reliable are they/are they prone to bugs/glitches or breaking in some way
  2. Do games/can games take advantage of the dual setup vs. a singular one (I know workstation things generally can)
  3. Do they generally perform better with an Intel CPU or would it be fine with an AMD one? This one I ask specifically because the new AMD CPUs (the R9 9950X3D2 Dual Edition) look quite nice for both gaming and workstation needs
  4. How is their general gaming performance (1080p or maybe 2k because my current monitors are 1080p but may upgrade to 2k eventually). Largely for modern games on decent quality settings?
  5. Is there any article, post, or video that gives multiple and broad benchmarks of using them / specifically the dual setup.
  6. What are the thermals like under average to high loads? Is there any recommendations on how to keep temps lower?

These are most of my questions but more may arise as I browse more. I know regardless of these answers really it'd be a major upgrade to what I have now which most of my hardware is more than a decade old and was mid tier at the time. I just want to be as informed as possible when making the purchase cause it is quite expensive.

reddit.com
u/QuantumAssassin45 — 24 days ago

I am looking in to getting a decent workhorse of a PC that can do both gaming and workstation loads and the dual setup for the B60 seems to be rather ideal from the surface level stuff I can find but I want to ask some questions from people who know more before I make decisions.

  1. How reliable are they/are they prone to bugs/glitches or breaking in some way
  2. Do games/can games take advantage of the dual setup vs. a singular one (I know workstation things generally can)
  3. Do they generally perform better with an Intel CPU or would it be fine with an AMD one? This one I ask specifically because the new AMD CPUs (the R9 9950X3D2 Dual Edition) look quite nice for both gaming and workstation needs
  4. How is their general gaming performance (1080p or maybe 2k because my current monitors are 1080p but may upgrade to 2k eventually). Largely for modern games on decent quality settings?
  5. Is there any article, post, or video that gives multiple and broad benchmarks of using them / specifically the dual setup.
  6. What are the thermals like under average to high loads? Is there any recommendations on how to keep temps lower?

These are most of my questions but more may arise as I browse more. I know regardless of these answers really it'd be a major upgrade to what I have now which most of my hardware is more than a decade old and was mid tier at the time. I just want to be as informed as possible when making the purchase cause it is quite expensive.

reddit.com
u/QuantumAssassin45 — 24 days ago