u/alirz

As title says. I have some IP cameras and also my home synology nas. I've tried on both flint 3 and flint 3z different firmwares.

The glinet constantly shows most IP cameras and my synology nas go offline for a few seconds and then online again this cycle repeats non stop.

Note that the devices are not actually going offline and maintain network connectivity.

It seems to be a glinet gui thing and I would like to figure out what causes this.

I've tried everything from disability hardware acceleration, adguard and also a whole bunch of Openwrt stuff from chatgpt etc but the issue persists

Does anyone else see this with any of their devices.

From what I've read, there's no real AC passthrough in the d3 max. So in order to use ups mode, the Ac inverter has to stay on.

How does this affect product life? Are batteries constantly charged assuming charge limit is set close to 100 or something?

Secondly now that I'm reading reddit, I'm seeing some bad support stories. Is ecoflow a brand I should even be considering as I'm a new user?

Those who have been customers for a while, is this a good company/product to deal with?

Long story short. I'm a born national of a country that the current US administration has on the immigration suspended list. I'm also a Canadian citizen.

My mom, a US citizen, had filed a i130 for me over two years ago. It initially used to say, 6 months left in completion but has been sitting in progress for over 18 months now.

So what happens now? the US government just took the application fee and then decided to suspend the applications for those countries?

anyone know how get invited to auxxilium' discord? cant seem to be able to post anything there as its locked

Been running xpenology for a very long time. After a recent re-build to SA6400 using the latest ARC loader 3.1.0. I notice that my cpu clock frequency is pretty much at max, even when i idle.

if i change the CPU governor to POWERSAVE via the ARC control app, the MHZ drops to the base frequency.

is this normal? is anyone able to check on their xpenology build? thanks

I'm setting up qbittortent to use with radarr.

I want to keep the QB setting to remove completed torrent after the share ratio is done or after a set number of minutes.

This setting seems to conflict with radarr as it won't let me connect to QB unless I disable that setting.

The thing is I want torrents not added by radarr to he automatically removed by QB.

Is there a way around this?

Thanks

I'm setting up qbittortent to use with radarr.

I want to keep the QB setting to remove completed torrent after the share ratio is done or after a set number of minutes.

This setting seems to conflict with radarr as it won't let me connect to QB unless I disable that setting.

The thing is I want torrents not added by radarr to he automatically removed by QB.

Is there a way around this?

Thanks

root@flint3:~# opkg update

Downloading https://fw.gl-inet.com/releases/qsdk_v12.5/kmod-4.7/be9300-ipq53xx/Packages.gz

Failed to send request: Operation not permitted

*** Failed to download the package list from https://fw.gl-inet.com/releases/qsdk_v12.5/kmod-4.7/be9300-ipq53xx/Packages.gz

Downloading https://fw.gl-inet.com/releases/qsdk_v12.5/packages-4.x/ipq53xx/be9300/glinet/Packages.gz

Failed to send request: Operation not permitted

*** Failed to download the package list from https://fw.gl-inet.com/releases/qsdk_v12.5/packages-4.x/ipq53xx/be9300/glinet/Packages.gz

Downloading https://fw.gl-inet.com/releases/qsdk_v12.5/packages-4.x/ipq53xx/be9300/packages/Packages.gz

Failed to send request: Operation not permitted

*** Failed to download the package list from https://fw.gl-inet.com/releases/qsdk_v12.5/packages-4.x/ipq53xx/be9300/packages/Packages.gz

Updating database.

Database update completed.

Collected errors:

* opkg_download: Failed to download https://fw.gl-inet.com/releases/qsdk_v12.5/kmod-4.7/be9300-ipq53xx/Packages.gz, wget returned 4.

* opkg_download: Check your network settings and connectivity.

* opkg_download: Failed to download https://fw.gl-inet.com/releases/qsdk_v12.5/packages-4.x/ipq53xx/be9300/glinet/Packages.gz, wget returned 4.

* opkg_download: Check your network settings and connectivity.

* opkg_download: Failed to download https://fw.gl-inet.com/releases/qsdk_v12.5/packages-4.x/ipq53xx/be9300/packages/Packages.gz, wget returned 4.

* opkg_download: Check your network settings and connectivity.

EDIT: The url themselves seem to reachable via a browser

as title says. first of all for some reason the chrome extension requires biometric setup/approval from the bitwarden desktop app, which i dont really want to to intall.

secondly, even when i've setup windows hello, fingerprint inlock for the chrome extension, if i launch the extension when the BW desktop app is not running, the chrome extension never fully launches, just spins endlessly. the fingerprint unlock prompt never appears, no matter how log i wait.

if i start the bw desktop app, then the chrome extension behaves normally. but this requires, kind two different instances of BW which seems pointless

I've tested this in two different phones, two diff Whatsapp users. Samsung s23+ and s25+.

On both phones, if you get a video call, the recipient device answers the call but the audio is on earpiece, thus very low volume, and not the main speaker.