bztransmit is at 100% cpu the entire day for over a month at this point. It was originally on schedule, but figured maybe thats the cause so I changed it to continous. Same problem still. The UI says I'm are backed up as of just TWO HOURS ago. Just what more does it need to process???
The only way to get it to stop, it to reboot the mac.
I've just tried my first print with the just arrived bambu "support for pla" filament and the surface is of poor quality and there is a lot of residue. Is that normal? Is there a way to fix it?
The way I've set it up, is that I've added the support filament to the project to the left, and then assigned it to "support/raft interface". And then theres a popup to ask me if I want to change all the recommended defaults, I just went with all of it. And then it went ahead with the print at the h2c (which uses left and right nozzle for the two filament shown here).
Can someone explain the difference between x4 and x4l? According to the site x4 has active dehumidification. But what does that even mean? Does the x4l dehumidifes at all then? I thought it does? Otherwise whats the point? I thought the point of these devices is to help me dry my spools? I asked AI, and it said that maybe for x4l I have to manually let the humidity out? That seems weird... ?
I can never get ironing to work for a real model. I've done the iron tests on swatches and I know the best settings (20%/40mm). As you can see the purple swatches its completely flat. But when used on the model, its horrible. Certain parts are ok, certain parts are completely messed up, and almost no part is completely flat. In this photo I know it's not the exact filament but in other prints I did use the exact filament.
Printer: h2c
Filament: all bambu PLA (tried matt and silk+)
Iron settings: rectilinear, 20%/40mm
I'm curious to hear any success stories from people who design and sell by generating traffic to your own site. How have you done it? Advertising? Social media? Any advice is apprciated. Thanks :)
Anyone here actually is able run a 3d business with e-commerce?
Ive been having my initial layer fail a lot. But my first 200 hours of print seems fine, maybe its just a conincidence that I've been picking harder models to print?
Im using h2c, with bambu pla matt only. Default PEI plate. Default print settings at around 0.20mm standard print profile. Using default 0.4mm nozzles.
It tends to fail more when its thin line or detail area. Large block of solid areas is usually fine.
Whats the best way to fix?
Im trying to print https://makerworld.com/en/models/2373512-flexi-manta-ray-print-in-place-no-support#profileId-2960206 I just used the first print profile as is and didnt change anything.
It's really disappointing that it failed right near the end of the print.
I'm using a H2C with bambu filament, this one is the PLA silk multi color. PEI default plate that came with the machine. The filament has been kept inside the AMS HT since opened.
I just upgraded to the m5 ipad pro from an older ipad. And Im surprised to find that when you use the portfolio case with the ipad standing up, and if you tap on the screen, the device just wobbles back and forth. The old ipad pro never does that. Is this normal?
I'm trying to print https://makerworld.com/en/models/2325443-urban-spiderman#profileId-2540243 with the h2c. And I've imported into the studio and didn't change anything, except to change the preset to 0.12mm High quality.
But as you can see in the pic, over night it printed and I woke up to find that the left arm broke and I suspect it's something to do with the support. I've seen this happen in one other print as well.
Any ideas how to fix?
Just trying to understand how best to use the h2c.
As a complete newbie, my basic understand is that, there are two nozzle, and the left is stuck on using the external spool while the right can use 4 colors from AMS via hothead swapping.
So suppose I'm printing a 2 color print (red and blue).
If I put red on the external spool and blue in the AMS. It will work great by alternating two nozzles.
If I put red and blue both in the AMS, it will still work by swapping hotheads, but only one nozzle is ever used so print speed will be slow but purge is still kept at a minimum.
Do I have it right?
I read a recent post here comparing Blackcat to Dino. And for some odd ass reason most people in this sub is of the opinion that Black cat is overtuned and Dino is undertuned? wtf? Despite Dino has overwhelming high winning rate across all ranks up to eternity and WAY above any win rates Blackcat ever had whether at launch or otherwise. Win rates:https://www.reddit.com/r/marvelrivals/s/GLRGpn5EqF
Also most comments here suggested that they should remove her store because her kit is overloaded. wtf? That would make her a completely generic character that has no meaning whatsoever.
Are people in this sub secretly just trolls that main other heroes?
It’s not just spiderman but any dives. Is this a normal thing? We would speed run through the whole map until the last stage, we can never close it with divers. It’s extra hard to dive a short respawn. Do you just switch off?
You want your mains to be buffed I get it, make your argument in a post and have a discussion. And then fine, maybe on the second day you have the same message but in a meme format just for fun. But a third day? Forth? Fifth? It's been a week with daily spam posts of the exact same thing. Even prime Elsa did not get this many complaints in a week. What's going on? Why is this ok?
I get that you get to steal ability. But the reality is that the enemy cannot be hurt but I can be hit during that whole time makes no sense? It’s like a self cc. Am I suppose to do it while hidden or something?
I got the JSAUX Docking Stations 5 in 1 two years ago but in recent months it doesn’t keep the steam deck charged when plugged in. I’ve tried all kind of power adapter and cable and it still doesn’t. But it used to. Any ways to fix?
It was supposed to be last year but haven’t seen anything