Hey, i have a problem with that bottom shelf? It stand out more on the left side and i cant insert side glass panel correctly which results in bad fit and squeaky sounds when im moving case, its possible to get a new one that bottom shelf or whatever its called.
Hey i have ethernet driver 2.1.5.7 and cant update it to any newer version, when im doing update it say its done but version is not changing, i tried different versions and nothing, any ideas?
Hey, i have i5 14600k oc'ed to 5.6p, 4.2e, 4.7 ring ratio and i compared my results in aida64 cache benchmark and mine l2 and L3 cache read speeds are like +- 200gbs slower than any other even stocks results from other ppl, also im encountering weird microstutter every 2 minutes or most often when game is rendering something in the dinstance and in coop games the problem is even more noticable like in 7 days to Die when im hosting server and im driving the stutter is for like 0.5sec every 20sec when games is loading terrain/textures and my friend with i9 10gen have no problem. So my question is this syptoms of possible CPU degradation/problem?
Hey, it is normal that i have microstutter like every 15-20sec when driving bike but on foot too, rx 9070xt i5 14600k, (server with friend)
Hey, any recommendations about timings?
Hey, it is normal that at around 130w CPU package power i have 80° deegres on CPU package? And if i had it connect via 1 cable to pump_fan1 on mobo then at 40% rpm the pump is working at 100% like on freezer 2?
Hey i noticed that i have low 1% fps in cyberpunk and around 80fps average in my location with max rt (no pt) 1440p fsr quality, and after DDU my fps went to around 100 for like 1 minutes and got stutter for like 1 second and fps drops to 80... Any ideas?
Hi everyone,
I’m having an issue with Cyberpunk 2077 and I’m trying to figure out what could be causing it.
My setup:
Intel i5-14600K
Radeon RX 9070 XT
DDR4 RAM
Windows 11
The game usually runs with decent average FPS, but I sometimes get noticeable micro stutters and pretty low 1% low FPS. What’s strange is that after overclocking the CPU and RAM, my average FPS is basically the same as on stock settings.
I also tested it without XMP enabled, and the average FPS still seems very similar. Enabling XMP, overclocking the RAM, and tuning the CPU don’t really improve the average FPS and 1% low in Cyberpunk.
The main problem is not the average FPS, but the frame pacing / micro stutters / low 1% lows. It feels like the game is not as smooth as it should be for this hardware.
Hey, i have arround 1.38vcore while idle which drops to 1.3v on stress, (llc 3, lite load 6) it is save?
Hey i have freezer 2 280mm rev.3 on z490 lga 1200 but i will changing to z690 lga 1700 and that on screen is what i find in aio box + some screws, did i need to buy something more?
Hey, i wanted to ask if it is normal that when i do a vram stresstest GPU and card is pulling arround 300w and GPU clock is 3250nhz and there is no coil whine but when im play any games then coil whine is quite loud especially in menu's with uncapped FPS.
​
RX 9070xt Nitro+