u/Electric_Sal

Hi everyone, happy 4th!

I saw people online complaining how their thermostat is set to a certain temperature but their house is hotter than the set point. Read this before you think you need to call HVAC company.

Pepco installs these outdoor devices to regulate your power usage if you've signed up to their Energy Wise Program, and in return Pepco gives you credit $ back to you in your bill. Based on the plan you've picked, it will either let the condenser unit run 30% or 50% of the time, though will let your fan run for the most time to just circulate air. Also, if you have a smart thermostat, the program can run off of that instead of having the outdoor device.

You can opt out of the program, but then you loose the credit $ and also your bill will go up because you use more power.

When this program in effect, you're house will stay a few degrees warmer than you're thermostat set point. My ecobee thermostat was giving me a warning of something might be wrong with my AC because it cannot bring temp to the set point when in reality it's the Energy Wise Program causing that. Picture for reference: when this orange light is on, pepco prevents your condenser from kicking in.

Like title says, I can't insert Duramag with bolt closed when loaded 30 rounds, even not with 29 rounds. Works only if 28 rounds. I have same issue with their 20 rounders if fully loaded. Tried them in 2 different ARs.

I saw a pmag ranger plate manual stating do not load more than 28 rounds in metal mags... But I've never had issue with my metal Colt metal mags or any of my trusty Pmags.

Has anyone had this happen to them? If so do you just load your "30 round Duramags" with 28 rounds?

Anyone has a picture of how the Icarus A.C.E. 320 X-Full look like in FDE? Website shows only black and ODG.

Google search shows P365 and some P320, but they all look different shades some more like goldish, some bronzish, and some just flat FDE.

Any pictures would be appreciated

Just got a universal NCStar Vism front and rear sight pusher. Trying to move the front sight on M9a4 that Delah installed for me last year ever slightly. I cracked the knob a little, but the front sight doesn't budge. Want to make sure I don't F this up because not sure where all that force is getting transferred to and afraid if I crank it up I'll either bend the slide or something else. Do I push it from #1 or #2 labeled in second picture?

D-lahhh said "What I do is tighten the vice to the sight, then use a punch and tap the vice part itself." No idea what he said, couldn't picture it in my 2 brain cells that are left 😅

I'm interested in seeing how you guys successfully moved your front sight in the past. Should I just old fashion it and punch tap the front sight itself?