u/Galaxywolf2112

Im looking to replace the steering wheel in my 2013 honda civic LX due to it starting yo fall apart its not to bad but ive only had this car for a year (almost 2) and the wheel didn't look like this when I got it. The top of the wheel is where most of it is worn and is the most flexible so im thinking of replacing it with the SI wheel since its leather but dont know if it will even mount up to the LX and I have no clue if I need a wheel remove or not (yes i understand the the SI wheel is ment for the SI but I dont care i Will just cover the SI badge thats on it if it does fit)

That is all :)

I went to a tire shop to get my tires replaced and a alignment, shop ignored my notes about how the passenger side wheel needs a camber adjustment, and how the alignment is completely out of whack because I have to have the wheel pointed left to go straight, both notes where ignored

Update: they fixed my alignment, but now I probably need to ruin it because my driver side has a clunk when turning 😕 they also stole my custom valve caps and only left the one on the spare. Oh well i will just print a new set off but like man I like thoes

UPDATE 2: turns out they left my tierod loose, I was able to turn the nut with my fingers, I feel if I paid $800 for tires and a alignment i shouldn't have to return to the shop for issues. This is more than mildly now 😡 I have contacted corporate and called the shop informing them that I feel this is unacceptable and I should be able to trust people who are certified, its pretty sad I trust my self who is only 20 and has been working on cars since I was 15

Not to long ago my subwoofer was going out had a rattle in it and the coil was burnt, i have a new one on the way but wanted to redo the amps gain after having my cousin try and figure it out but his Digital Oscilloscope didnt work (he was playing a 30hz sound with the poorly tuned subsonic filter). Well I figured i would give it a shot and ordered a Digital Oscilloscope off Amazon about $40, im trying to figure it out like the video ive watch but idk if this is right 🤣, it also has a steady wave when no audio, i cant hear it though when there was a subwoofer. Sorry for poor video quality or anything this was from snap

UPDATE: I figured it out and am now breaking the new sub in as it was delivered early

So ive had some issues with my skar 8in sub and the 350w amp, ive ran into 2 issues with this sound system but the 1 issue turned out to be the subsonic filter was turned up to high and it wasnt needed.

But recently ive had a protect mode issue with it. I assumed it was my alternator considering its the factory one, and my voltage would drop below 9V sometimes but jump back up, well the issue went away and hasnt shown up again, till now I guess. My car was idling for 30 ish mins (I got off work and a buddy showed up and we got to talking) well i got into my car and shut the door (I know i slammed it but at work i drove a van thats door never shut enless slammed so its a habit) but when i slammed the door the amp would loose power (like no lights at all) or will jump into protect, I did have to redo the wires at somepoint due to a case of water leaking and the trunk getting wet and everything getting wet but it never got on the amp (due to the plate its mounted too). Im just wondering if it should be fine because it only does it occasionally and isnt a every day issue and works just fine

So i was trying to set up a old reciver for my tv we knew we had the remote to the reciver but couldn't find it and assumed we lost it when we took the reciver out of town for the 4th and used it for music, well before I ordered the new remote I went upstairs to check out the one we keep in the living room and grabbed what I thought was the remote to the one upstairs because it was in the arm of the couch and thats where we keep the remote for it, it didnt work i thought it was dead and I left it up there, I pulled up the Amazon page for a replacement one and I thought I seen it somewhere, I checked the garage because I thought I seen it In there, didnt find it. Ordered the new one and it arrived today, it took me holding the new one to relize the one upstairs was the one to mine and not the one upstairs. None of these say the recivers name so I didnt comprehend it was to mine.

Sorry for the video angle my phone was in my cup holder

Before you say its the nozzle hitting the print or a clog i already know my issue (I think) filament has been hard to pull out and mushrooms at the end someone said it could be the tube is slid back, ive ignored it for a min and the only times ive had a issue is with gray filament, I dried one for a whole day and the extruder would cut into it ans break it causing a fail, i blamed the filament because it was the only one I did it on, well in this print im using my silver filament and it did it again, im currently reprinting the print after pushing the tube down and replacing the nozzel, ive also checked the arm for the extruder, no cracks but I did notice that the extruder is leaving groves in the filament, its as loose as it goes so idk

Print failed due to unlevel bed (thanks amazon the bed parts I need would of fixed this if u didn't delay the packaged i paid to have delivered the next day) nozzle got covered, headed it up removed nozzle and put a new one it hit cool down and it started screaming at me :D

This is the bottom of the print but they always look like this if its round at the bottom where a support meets it (sorry if u see another post without the photo i forgot to add it)

Wow I knew it was going to happen but not when it would, this was a 6-8 hour print, I stared it this morning and left for work got home and boom, failed print, after pondering what happened, turns out my build plate came unleveled causing this mess now i got to restart it

Ive noticed that my printer seems to be louder when moving is this normal sound or should I be concerned

What do you guys think about white blinkers? I had to replace a headlight bulb and thought it might aswell replace the blinkers, ive practically replaced all my bulbs now

So i was talking to a few friends while playing beam rls career and they started asking me questions while flying down the highway -_-

I started a new normal RLS career mode save without a garage, I made this save 4 days ago, and rented 1 garage just to buy a car that barely even gets up to 3, this car has rolled down the hill and hit so many times that im surprised it even worked up till it over heated and locked up, I also had a massive power boost when the exhaust fell off

Before u say anything about the transaction history thing I changed the name on it and also covered up the gifted names and the last 2 digit and what type car it was