
joint measure
currently making my first last, and i am stuck in these steps, how do i measure the joint?

currently making my first last, and i am stuck in these steps, how do i measure the joint?
As a begginer, I want to make my first project, a work boot, but don really know where to start. I do have the material, and most tools, but I dont know if I should start with a bought template, because its already done and tested and what not, but most content I found really start from scratch making the template around the last or the foot, and that technique with the tape and etc. My problem with the template is that it is really expensive outside the US and i fear the size might be wrong. I was hoping to find free patterns around here, but no luck.
Hello, I'd like to by my first pair of boots but i don't really know what im looking for, right now I am using what I can get my hands on, one old pair bullterier about 2 sizes too big, and before that I had old running shoes( not recomended, ik). I know that boots ain't cheap, however I dont have high budget. Any advice you can give?
Now here is the important stuff, not in america, so stuff is around 5 times more expensive. I can use amazon, ebay and most other online stores tho
I received it as a gift, a "vintage" camera. I am new to photography, and i cant seem to focus with this camera, i tried every option i could in the configuration, but i simply dont understand it. Someone have any ideia what can i do?
I opened three old cameras to see if i can Frankenstein my way into making one that work, i guessed that by being from the same year and same manufacturer the conections would be somewhat similar, and they are, mostly ffc and fpc cables, but the size of each is quite different for the same piece, is there any way to connect the cables to the ports? Or i would need a new circuitboard ? The cameras already dont work, so any idea is valid
Recently I got the pieces i want for a project, but turns out the conections are different, not entirely different, its that "flat" wire in this specific case. Is there a way to connect the pieces or I must buy a new board?
I got my hands on some old cybershots that barely work, and i want to merge them into one, for all i know, i need to conect the pieces that do work together and maybe install a new OS. Thats how it works in my head but i dont want to just jump head first and lose the pieces.
Does someone have any idea or previous project that could give me a heads up in this?
I got my handa into old cameras, and i want to make a cyber deck project eventually, i wonder if i can star with making a camera just for the vibes really. Now, i dont know if this belongs in this comunity or even if it ia possible, does anyone have some insight?
Context: I want to give a vintage camera to a friend of mine who is really into pictures, however i dont see diference from a somewhat low quality camera to a "vintage" one. I dont want to give a bad camera and just stick a vintage lable on it, searching for used cameras has been my method so far but still, i have little to no knowledge on the area
Budget: R$ 100 close to 20US$
Country: Brasil
Condition: so far, used is fine
Type of Camera: digital? With sd card? Idk
Intended use: Photography
If photography; what style: travel, spontaneous, mediaposts mostly
What features do you absolutely need: i dont know
What features would be nice to have: telescopic lens, but only because it makes the camera nicer
Portability: very portable, dont need it to fit in a pocket, but belt straped or in a purse
Cameras you already have: iphone 17 if that counts and a canon from 2019 I dont know the model of
estou arrumando uma maquina de costura e quero testar o motor antes de ligar diretamente na luz, o multimetro esta apontanto continuidade tanto com as duas escovas quanto com os cabos de força juntos. os registros são:
cabo esquerdo com escova esquerda=10.2 ohms
cabo direito com escova direita = 10.2 ohms
cabo direito com cabo esquerdo = varia de 160 até 200 ohms
escova direita com escova esquerda = varia de 80 a 170 ohms
desconfio que o motor esteja em curto, mas não entendo muito sobre
I got this as a gift of sorts, i dont want to throw it away, however, there is no pedal and not even a power cord. By now all i could get done was to open it and clean the insides, which is not that dirty. I just want to know if there is a way to turn it on or to test the motor.
So, im looking for a video of the musical hadestown, made by CHS. the title was literally CHS Hadestown. It was 6 or 8 years old, i was listening to it one day, and the other i could not find the video anymore, no longer on my playlist, no longer in my history.
is there a way to acctualy find it