Same Eclipse, different workspace: in one, the commits are to the left; in the other, the blue arrow indicates an update.
'Swap Left and Right View' only swaps the panels in the compare editor; it doesn't change the synchronization panel or the arrow directions.
I want to set them in the same way :(
Hello,
I recently purchased a Redragon VATA PRO keyboard and I have a question/problem regarding the G1-G5 macro keys.
I would like to create a macro such as:
javierGutierrez{TAB}myLongKeypa$$01{TAB}Enter
without any delays between the keystrokes.
When I manually record the macro using the keyboard's REC function and G1-G5, the keyboard records not only the key presses but also the time intervals between them. For example, if I take 15 seconds to type the sequence, the macro can take approximately 15 seconds to play back.
I have tried generating the keystrokes automatically using several methods, including:
AutoHotkey Send
SendEvent
SendInput
Explicit KeyDown / KeyUp events
AutoHotInterception / Interception, targeting the actual VATA PRO keyboard device
I can successfully generate the keystrokes in Windows. However, the Redragon macro recorder does not recognize these simulated keystrokes when it is in REC mode. Only physically pressed keys are recorded.
I have also noticed that the Redragon software includes a macro editor where I can manually edit the recorded delays. However, there appears to be an important limitation: macros created/edited through this software cannot be assigned to the dedicated G1-G5 keys. They can only be assigned to other regular keyboard keys.
This makes the software macro editor quite impractical for the purpose of using the dedicated G1-G5 macro keys.
My questions are:
Is there a way to configure the VATA PRO so that G1-G5 macros do not record the timing/delays between keystrokes?
Is there a setting in the Redragon software to record macros with a fixed or zero delay?
Is there a way for the software's macro editor to assign a macro directly to G1-G5?
Does the VATA PRO firmware support receiving simulated/generated keyboard events during macro recording, or does the recorder specifically require physical keyboard input?
Ideally, I would like to use the dedicated G1-G5 keys while having the macro execute the keystrokes immediately, without reproducing the delays that occurred during recording.
Thank you for your help.
Hello,
I recently purchased a Redragon VATA PRO keyboard and I have a question/problem regarding the G1-G5 macro keys.
I would like to create a macro such as:
javierGutierrez{TAB}myLongKeypa$$01{TAB}Enter
without any delays between the keystrokes.
When I manually record the macro using the keyboard's REC function and G1-G5, the keyboard records not only the key presses but also the time intervals between them. For example, if I take 15 seconds to type the sequence, the macro can take approximately 15 seconds to play back.
I have tried generating the keystrokes automatically using several methods, including:
AutoHotkey Send
SendEvent
SendInput
Explicit KeyDown / KeyUp events
AutoHotInterception / Interception, targeting the actual VATA PRO keyboard device
I can successfully generate the keystrokes in Windows. However, the Redragon macro recorder does not recognize these simulated keystrokes when it is in REC mode. Only physically pressed keys are recorded.
I have also noticed that the Redragon software includes a macro editor where I can manually edit the recorded delays. However, there appears to be an important limitation: macros created/edited through this software cannot be assigned to the dedicated G1-G5 keys. They can only be assigned to other regular keyboard keys.
This makes the software macro editor quite impractical for the purpose of using the dedicated G1-G5 macro keys.
My questions are:
Is there a way to configure the VATA PRO so that G1-G5 macros do not record the timing/delays between keystrokes?
Is there a setting in the Redragon software to record macros with a fixed or zero delay?
Is there a way for the software's macro editor to assign a macro directly to G1-G5?
Does the VATA PRO firmware support receiving simulated/generated keyboard events during macro recording, or does the recorder specifically require physical keyboard input?
Ideally, I would like to use the dedicated G1-G5 keys while having the macro execute the keystrokes immediately, without reproducing the delays that occurred during recording.
Thank you for your help.
Hi everyone,
I'm looking for an Android Telegram client that supports more than 10 accounts simultaneously.
On Windows, I use Forkgram, which works flawlessly and lets me add as many accounts as I need. However, finding a proper alternative for Android is being a bit tricky:
I need to manage around 15 accounts in total. Is there any open-source or trusted client for Android that has unlimited multi-account support just like Forkgram does on desktop?
Thanks in advance!
Hi everyone,
I'm having an issue where GroupHelp refuses to coexist with another b0t in the same group.
Here is my setup: I have a custom clone of GroupHelp that I use to notify member joins/leaves and to export the group log to a registry.
Recently, I've been building a brand new b0t from scratch using TypeScript, Vercel, and Supabase. The problem arises when I try to add both b0ts to a private community I created for testing: as soon as the second b0t joins, one of them automatically leaves the group.
I even get an automated message saying:
📤 The b0t GroupHelpB0t will leave the group, as the b0t azucara2B0t is active here.
Interestingly, this doesn't happen when using MissRoseB0t alongside my custom b0t.
Is there any configuration or setting in GroupHelp to disable this behavior and allow both to stay in the group? Any workarounds or insights would be greatly appreciated!
Is it just me, or is the new Devin plugin in Windsurf nearly impossible to configure?
I love Windsurf, but this transition has been rough. If anyone has a working configuration file or a quick tutorial, please save my sanity and drop it below.
Hey everyone,
I'm having a nightmare of a time trying to get ComfyUI Manager to work. I've tried both the Portable version and the new Desktop Setup (v0.9.3), and both are failing for different reasons.
Here is what's happening:
When I load a workflow, I get the usual red blocks indicating missing nodes. However, when I click on Manager -> Install Missing Custom Nodes, the list comes up completely empty (it shows 0 missing nodes). It simply refuses to detect or fetch them.
Because the portable version was failing, I uninstalled everything and installed the official ComfyUI Setup 0.9.3 - x64.exe into D:\Comfy.
The file structure looks a bit weird in this version. The main custom nodes folder seems to be buried deep here: D:\Comfy\ComfyUI\resources\ComfyUI\custom_nodes
I opened PowerShell, navigated to that exact directory, and cloned the repo:
Bash
PS D:\ComfyUI\resources\ComfyUI\custom_nodes> git clone https://github.com/ltdrdata/ComfyUI-Manager comfyui-manager
The clone was 100% successful and the comfyui-manager folder is physically there inside custom_nodes.
The problem: When I launch ComfyUI, the Manager button is completely missing from the UI. It's like ComfyUI is ignoring the folder entirely.
>
Has anyone encountered this with the new 0.9.3 desktop installer? Why is the portable version showing 0 missing nodes, and why won't the desktop version recognize the cloned manager?
Any help would be greatly appreciated!Hey everyone,I'm having a nightmare of a time trying to get ComfyUI Manager to work. I've tried both the Portable version and the new Desktop Setup (v0.9.3), and both are failing for different reasons.
Here is what's happening:
Issue 1: Portable Version (0 missing nodes found)When I load a workflow, I get the usual red blocks indicating missing nodes. However, when I click on Manager -> Install Missing Custom Nodes, the list comes up completely empty (it shows 0 missing nodes). It simply refuses to detect or fetch them.
Issue 2: Desktop Setup v0.9.3 (Manager button doesn't appear)Because the portable version was failing, I uninstalled everything and installed the official ComfyUI Setup 0.9.3 - x64.exe into D:\Comfy.The file structure looks a bit weird in this version. The main custom nodes folder seems to be buried deep here:
D:\Comfy\ComfyUI\resources\ComfyUI\custom_nodesI opened PowerShell, navigated to that exact directory, and cloned the repo:Bash
PS D:\ComfyUI\resources\ComfyUI\custom_nodes> git clone https://github.com/ltdrdata/ComfyUI-Manager comfyui-manager
The clone was 100% successful and the comfyui-manager folder is physically there inside custom_nodes.The problem: When I launch ComfyUI, the Manager button is completely missing from the UI. It's like ComfyUI is ignoring the folder entirely.Note on path discrepancy: In my PowerShell logs, it shows I ran it in D:\ComfyUI\... instead of D:\Comfy\ComfyUI\.... I might have messed up the path during troubleshooting, but even when making sure it's in the resources\ComfyUI\custom_nodes folder of the active installation, it doesn't load.What I've tried / checked:Confirmed Git is installed and working.
Why is the portable version showing 0 missing nodes, and why won't the desktop version recognize the cloned manager?Any help would be greatly appreciated!
para preguntas o hablar de comunidades para adultos. para evitar censuras pero que no sea en inglés.
En reddit he visto un tal AMA Ask Me Anything pero nada más
para preguntas o hablar de comunidades para adultos. para evitar censuras pero que no sea en inglés.
En reddit he visto un tal AMA Ask Me Anything pero nada más