u/Showerbeerz413

Been stuck on this at work all day so figured I'd throw it out there and see if anyone has any ideas.

I work IT at my company and I was stuck troubleshooting my own printing issues for several hours today (with no resolution). I had to set up a new computer for myself, mapped the printer, (my printer I have to map using IP) pulled the drivers, and attempted to print and nothing happened. Checked the mapping, checked the driver, bounced the spooler, tried again and got nothing. Fully removed the printer and drivers and readded it all and tried again with no success. Tried printing to other printers in the building (those I mapped using the local print server) and those did not work. I tried these various steps 4 or 5 more times and never had any success. Just to check, I fully imaged up an entirely new computer for myself, tried it all again and that did not work. I had a separate computer that was supposed to go to a new user, mapped the printer on their computer and it instantly worked. I logged in as myself (Still seeing the same printer mappings) and was able to test print 1 time and then after that it never worked again.

Each time the computer seems to send the print job with no issues (In the printer settings it shows it go from idle to 1 job in queue, back to idle) and there aren't any errors, but the job never appears in the queue on the printer itself. I know it isn't a networking issue because other people can print to all of these printers with no issues and I'm able to remote in to the printer to see the queue. I tried USB plugging the printer in to my computer and that also did not work. I'm kind of at a lose on what to try next.

EDIT: Thanks everyone for the ideas. After digging through event log files, it ended up being an change to the firewall that started blocking printing for only a few of us. When I asked why it didn't effect more people, they were unable to tell me why. But it works so yaye?

Been stuck on this at work all day so figured I'd throw it out there and see if anyone has any ideas.

I work IT at my company and I was stuck troubleshooting my own printing issues for several hours today (with no resolution). I had to set up a new computer for myself, mapped the printer, (my printer I have to map using IP) pulled the drivers, and attempted to print and nothing happened. Checked the mapping, checked the driver, bounced the spooler, tried again and got nothing. Fully removed the printer and drivers and readded it all and tried again with no success. Tried printing to other printers in the building (those I mapped using the local print server) and those did not work. I tried these various steps 4 or 5 more times and never had any success. Just to check, I fully imaged up an entirely new computer for myself, tried it all again and that did not work. I had a separate computer that was supposed to go to a new user, mapped the printer on their computer and it instantly worked. I logged in as myself (Still seeing the same printer mappings) and was able to test print 1 time and then after that it never worked again.

Each time the computer seems to send the print job with no issues (In the printer settings it shows it go from idle to 1 job in queue, back to idle) and there aren't any errors, but the job never appears in the queue on the printer itself. I know it isn't a networking issue because other people can print to all of these printers with no issues and I'm able to remote in to the printer to see the queue. I tried USB plugging the printer in to my computer and that also did not work. I'm kind of at a lose on what to try next.

Been stuck on this at work all day so figured I'd throw it out there and see if anyone has any ideas.

I work IT at my company and I was stuck troubleshooting my own printing issues for several hours today (with no resolution). I had to set up a new computer for myself, mapped the printer, (my printer I have to map using IP) pulled the drivers, and attempted to print and nothing happened. Checked the mapping, checked the driver, bounced the spooler, tried again and got nothing. Fully removed the printer and drivers and readded it all and tried again with no success. Tried printing to other printers in the building (those I mapped using the local print server) and those did not work. I tried these various steps 4 or 5 more times and never had any success. Just to check, I fully imaged up an entirely new computer for myself, tried it all again and that did not work. I had a separate computer that was supposed to go to a new user, mapped the printer on their computer and it instantly worked. I logged in as myself (Still seeing the same printer mappings) and was able to test print 1 time and then after that it never worked again.

Each time the computer seems to send the print job with no issues (In the printer settings it shows it go from idle to 1 job in queue, back to idle) and there aren't any errors, but the job never appears in the queue on the printer itself. I know it isn't a networking issue because other people can print to all of these printers with no issues and I'm able to remote in to the printer to see the queue. I tried USB plugging the printer in to my computer and that also did not work. I'm kind of at a lose on what to try next.

Been stuck on this at work all day so figured I'd throw it out there and see if anyone has any ideas.

I work IT at my company and I was stuck troubleshooting my own printing issues for several hours today (with no resolution). I had to set up a new computer for myself, mapped the printer, (my printer I have to map using IP) pulled the drivers, and attempted to print and nothing happened. Checked the mapping, checked the driver, bounced the spooler, tried again and got nothing. Fully removed the printer and drivers and readded it all and tried again with no success. Tried printing to other printers in the building (those I mapped using the local print server) and those did not work. I tried these various steps 4 or 5 more times and never had any success. Just to check, I fully imaged up an entirely new computer for myself, tried it all again and that did not work. I had a separate computer that was supposed to go to a new user, mapped the printer on their computer and it instantly worked. I logged in as myself (Still seeing the same printer mappings) and was able to test print 1 time and then after that it never worked again.

Each time the computer seems to send the print job with no issues (In the printer settings it shows it go from idle to 1 job in queue, back to idle) and there aren't any errors, but the job never appears in the queue on the printer itself. I know it isn't a networking issue because other people can print to all of these printers with no issues and I'm able to remote in to the printer to see the queue. I tried USB plugging the printer in to my computer and that also did not work. I'm kind of at a lose on what to try next.

Been stuck on this at work all day so figured I'd throw it out there and see if anyone has any ideas.

I work IT at my company and I was stuck troubleshooting my own printing issues for several hours today (with no resolution). I had to set up a new computer for myself, mapped the printer, (my printer I have to map using IP) pulled the drivers, and attempted to print and nothing happened. Checked the mapping, checked the driver, bounced the spooler, tried again and got nothing. Fully removed the printer and drivers and readded it all and tried again with no success. Tried printing to other printers in the building (those I mapped using the local print server) and those did not work. I tried these various steps 4 or 5 more times and never had any success. Just to check, I fully imaged up an entirely new computer for myself, tried it all again and that did not work. I had a separate computer that was supposed to go to a new user, mapped the printer on their computer and it instantly worked. I logged in as myself (Still seeing the same printer mappings) and was able to test print 1 time and then after that it never worked again.

Each time the computer seems to send the print job with no issues (In the printer settings it shows it go from idle to 1 job in queue, back to idle) and there aren't any errors, but the job never appears in the queue on the printer itself. I know it isn't a networking issue because other people can print to all of these printers with no issues and I'm able to remote in to the printer to see the queue. I tried USB plugging the printer in to my computer and that also did not work. I'm kind of at a lose on what to try next.

in what order does priority pass when interacting on spells? does it continue around in player order or does priority go to the players whos turn it is?

​

example, it is player 1s turn and player 1 casts a spell. player two passes priority and player three casts an instant speed spell in response to player 1s spell. as player three passes priority, does priority go to player 4 (next in turn order) or player 1 (the persons who turn it currently is)?

​

ive always played that it goes by turn order but recently ive had a couple people say that priority goes to active turn player first.

waa given an n64 and ive been digging online trying to find an expansion pack but theyre pretty expensive. gamestop is selling official ones for almost $80 and ebay is atill mostly around $60. anyone aware of any Chinese ones or something that are cheaper? would like to grab one but dont want to pay that much for one