u/Vectron3D

Bit of an oldie now but still holds up

She lives to ride again 😅😬

Had to get the car the recovered a few weeks ago after a crank no start, after a bit of investigation turns out the fuel filter/pressure regulator is toast and the diaphragm has failed. Letting fuel past and up into the vaccum line leading to the F connector and dumping fuel into the intake boot. flooding the inlet manifold and cylinders. Managed to blow out the cylinders with the plugs removed then replaced them, dried out the manifold and
throttle body / boots and replaced the fuel pump at the same time for good measure.

Shot on an iPhone 13 Pro Max. Pretty happy with the overall tone, very much has that early 00’s feel that BMW had to their published material

Anyone know the diameter of the outer ball joints on the M3 arms ?

The realest of boys

They did such a damn good job with the E46 interior. Even today it feels fresh

Even 20+ years later it’s still a great place to be.

The time has come and these are the short listed colours. LSB is a strong contender but I also love Silver grey and Phoenix yellow.

1 - silver grey
2 - Laguna Seca Blue
3 - Phoenix Yellow
4 - interlagos Blue

I feel like the first one is very, early 2000s BMW brochure

So just a little update to the post I made a couple weeks ago when my plates were stolen

😮‍💨

Brand new, any colour any spec but you can only have 2

Edit - Z8 is also an option !

1 - E26 M1
2 - E24 M635CSI
3 - E30 M3
4 - E31 850CSI
5 - E38 750iL
6 - E36/8 Z3M coupe ( clown shoe )
7 - E46 M3 CSL
8 - E39 M5
9 - E86 Z4M coupe
10 - E60 M5
11 - E63 M6
12 - E52 Z8 ( not pictured )

Cars been parked by my house for over a year.
Pretty sure there’s an entire echo system in there now

Still taxed and hasn’t moved an inch for over a year

Didn’t damage the car at least 🙄

Nothing super special here just various layered elements

Almost a year after deep cleaning the shit out of the engine bay she’s still going strong 💪