u/VegetableShoe6264

My SD card got totally corrupted when I hit cancel. I haven’t done anything differently in how I’m using it. My backup SD card is now in and it’s saying the same thing

Using Dana and when to switch from File 1 to File 2 and it made me save it before I switched (it doesn’t normally do that) and next thing I know my files are missing off my SD card and my Dana and the SD card looks like this when I plug it into my computer.

The file in question is supposed to be “1JOHNO~1.PDB” although that is not what I named it and it’s supposed to be at least 69 kb

Ran a cycle overnight, looks like cycle finished but woke up to this error code I don’t know how to decipher.

After trying to hit start/clear a bunch of times the pump is now running seemingly constantly when door is closed.
No sitting water in the bottom, dishes are clean.

I have tried to hard reset by unplugging and it says power failure (pF) and then rA and goes back to flashing the error code in the picture.

Model number:FGHD2465NF1A

Ran a cycle overnight, looks like cycle finished overnight but woke up to this error code I don’t know how to decipher. After trying to hit start/clear a bunch of times the pump is now running seemingly constantly when door is closed. No sitting water in the bottom, dishes are clean. I don’t know how to reset it.
I have to unscrew the dishwasher to unplug it

Is it possible to tell just from these pictures if any of these are outlets? House was built in 1969. It was switched to 200 amp service in 2012 and that’s all I know about it.

First picture is standard ground level on the 4th wall of a bedroom with one outlet on each of the other 3 walls.

Second picture is a standard ground level outlet on the 3rd wall of a bedroom with one outlet on 2 of the other 4 walls (4th wall is mostly a closet and behind a door, makes sense to have no outlet there). And yes, I cracked the plate in half trying to get it unstuck from the wall bc of so many layers of being painted over.

Third picture is light switch level right next to the switch for the living room fan.

We have 3 major concerns. Two of which stem from a tree that was taken down at some point by a previous owner.

1. The roots: we have looked at the options for taking the stump out but there are still roots that are resurfacing in various spots. Do we have to dig those up in their entirety or just below the surface of the soil cut them and level off the dirt?
2. The weeds: this is the most out of our wheel house. The first picture shows these super tall thorny weeds that spring up as it gets warmer. In our removal of the bark we have seen their thick white roots within the grass roots. Are these something to dig up, smother with cardboard, or kill with weed killer? What does that process look like?

ETA: I guess I should have been even more specific. The tall grass in that field is not our property. Where the grass is mowed is where our property ends. I am referring specifically to the area around the concrete pad

In the process of making this edit apparently my third point got deleted but I believe my question about it was answered. So I won’t bother to type it out. It was about a bunch of buried bark in the patch.