Have a project that calls for outdoor RGBTW and the Lumaris RGBTW tape is indoor only. Curious if any of you guys have found a third party 24v tape that will work with the Lumaris controller?
Trying to compensate for quiet speakers; do I want the AGC before the gating mixer or after? If before do I add individual blocks per mic or use a multichannel AGC? Should I also add a compressor?
Any distributors in the US still have Hikvision stock? ADI sent everything back; need one DS-KD8003-IME1(B) and one DS-KD-TDM.
I got volunteered to do the camera control for an event. 4 NC-12x80 in the middle of a rectangular table arrangement (about 36x18) and about 40 Shure ULXD8 mics. Q-SYS x10 core, room is about 46x27. No handheld or lavalier mics; desktop mics only. I am debating whether to go manual PTZ control via Visca, ACPR or VisionSuite. For ACPR I can eighter use the Shure mics or three Q-SYS NM-T1. For VisionSuite I can use a singe Sennheiser TCC2 suspended from the projector drop mount; it will not be perfectly centered in the middle of the table though. I also only have a single cat6 going to the projector going through an HDMI extender with Ethernet port, not sure if Dante will work that way. Which way would you go? Leaning towards ACPR with discreet mics; will not be moved during the event and the participants will be stationary. Will have the AIDA CCU-IP as backup.
What is a rough guestimate to rent 26 ULXD8 mics and ANX4 for a conference in NYC?
Clients need four TVs for an event; is there a plug in for eighter brand in QSYS?
Need to add 26 ULXD8 to existing 24 ULXD8 for event. Already have 9 installed ULXD4Qs; adding one more ULXD4D and ANX4. The ULXD4s will connect to the UA844+SWB that can handle 10 devices; can I have the ANX4 on its own antennas? If yes; how far from the UA844+ ones? I could also do away with the dual ULDX4 and just add the ANX4 instead (will lose some ULXD1s but they won't be needed for the event) Can I use the same antennas from the UA844+SWB for both ULXD4 and ANX4s?
Need to rent 10 Shure ULXD8 mics for an event; which companies should I be looking at in the NYC area.
There will be an operator for the event. Rectangular table setup with over 40 ULDX8 with the VIPs on all four sides. What is the fastest way to manually control zoom and pan on the four cameras? Is there a way to use the camera preview window with a touchscreen laptop? Trying not to use the arrows and zoom buttons and just be able to do multi touch zoom and pan using a mouse or the touch screen.
Any point to Visionsuite if you don't have VSA-100 and beamforming mics? Using 20 ULXD8 in a reconfigurable multi-function room. Can I do ACPR even though the tables won't always be in the same place?
Did anything change with the 10.4 update and USB-C/HDMI? USB-C audio no longer works on the NV-21-HU when used in video distribution mode; HDMI works fine. I do get the video on the projector; just no audio get passed in the chain. USB bridging work fine though.
Not getting any audio from the Oppo bluray HDMI out either connected to NV-32-HU set as decoder; don't know if it is related. I do get video though. Cable box works fine on the same HDMI input.
Will try the new mediacast mode next time I guess; might be related.
Main switches are Netgear AV line but I'll need secondary switches in a few locations where I need to connect both NV-21-HU endpoints and NC-12x80 cameras. What do you guys use in such situations? Can I get away with an unmanaged POE++ switch like this:
8-port Multi-Gigabit Unmanaged Switch Series - MS108UP | NETGEAR
Both boxes work fine for about two weeks but then stop with error message eum_BTP_999_title. I would then have to factory reset one of the boxes and they will start working again for another two weeks. Ubiquiti router, black ethernet moka adapter for the boxes and no coax. Never connected the boxes to Wi-Fi; only hardwired. Activate fine with UCG Ultra.
Any news on Android 14 Vseebox Elite in 2026? Been holding off purchasing one for a few months hoping for a new Elite model.
Client wants adjustable individual mic gain; how much range would you give them? I am thinking +4 -8?
Configurator see it but it gives me an error "response status code does not indicate success 404 (not found)" Can't access it from the browser eighter. Dead?
Need to have two BYOD laptops connected to the same system and manually switch between them; different ends of the room. I am adding a 2x1 input selector for the speakerphones ins, 1x2 output selector for the speakerphones outs with the control pins of the two blocks connected. Seems to be working in emulator; anything I am missing?
Need to have two BYOD laptops connected to the same system and manually switch between them. I am adding a 2x1 input selector for the speakerphones ins, 1x2 output selector for the speakerphones outs with the control pins of the two blocks connected. Seems to be working in emulator; anything I am missing?
Client wants to be able to control each mic gain individually; where should I give them access? Allow them to control the post gate gain in the gating mixer or setup individual gains after the gating mixer and add one more regular mixer after that?
Need to have one DS-KD8003-IME1 at the door and one at the outer gate; can I have two on the same system? I think I've seen a setting for main/secondary but I am not sure. I am planning to wire one strike directly to each station. Or should they both be wired to the main door station as 1st/2nd strikes?
Can they both address the KH8 indoor stations as well?
