u/mashedleo

I shortened a frame for a g48 to make it the perfect length for the 43x with the radian ramjet. Turned out well imo. Printed it Sunlu pa6-cf on my H2C.

Printed in sunlu pa6-cf. Passes basic function checks but there is play in the trigger housing and the trigger hits the trigger guard. I'll throw a different trigger shoe on it and see if that helps. Planning on taking it to the range this weekend. In a couple of months I'll be living on 10 acres. No more range trips for testing purposes ☺️

I've been absolutely loving my Q2. I got it last November and it's been a workhorse. I have about 3800 hours on it. I had been printing mostly pa6-cf, ppa-cf and ppa-gf the last couple months. I had my Qidi box disconnected and was feeding my filament externally from a dryer. This morning I decided I was going to do a multicolored pla print. So I shut off the Q2 and connected the box. I turned it on and got an error saying it couldn't boot. Also that the camera had an error and to turn off ai detection. I can access the UI still and I disabled the ai detection but still get the error. I took the panel off over the ap board and unplugged the camera but still get the camera error when I power down and turn it on. I have tried repeatedly to restart the firmware and restart klipper but it doesn't work whatsoever. Has anyone encountered something like this?

So this ppa-cf is 22.50 on Amazon. Definitely made me suspect. The reviews are mostly bad but from the pictures it looked to me to be wet. So once I had the roll I dried it at 100c for 24 hours and ran a print. The results were not pretty. It still looked wet. So I dried it an additional 12 hours at 110c and this is the result. I have no idea if this stuff is going to perform like the other ppa-cf 's I have used. I plan on building this Mac 45 by unseenkiller and will update after testing.

3d printed hellcat pro frame. Printed in pa6-cf. Mcarbo trigger. Galloway precision spring kit and Rook precision comp. Cheapo zulisy green dot (actually works pretty well). Tlr7 x sub light. The comp definitely makes this little guy much more manageable 👍🏻

Springfield hellcat (hello kitty) frame by DB firearms. Printed in yxpolyer pa6-cf on my Qidi q2. Mcarbo trigger and spring kit. Rook precision comp on a hellcat pro sized frame.

Hey there everyone, I was tasked by my girlfriend to help find an frt for her pop's ar-15 in 5.56 for fathers day. Being that I'm a member of the PSA sub I thought it a good place to ask some questions. I've only put an frt on my 10/22.

​

I'm wondering what the easiest one out there would be to use on a stock PSA ar-15. I haven't seen the rifle in person and just have a picture. Does PSA use a certain standard buffer weight on their rifles?

​

I'd love any ideas on the best ones, frt or super safety? I also 3d print if anyone thinks some of the printable ones are worth while. I'd like to just be able to help him get it going.

Xd 9mm printed in Siraya Tech's odg pet-gf. Printed at 315c on a Qidi q2.

Title of the frame is "like a b6"

Cz 75 clone. Assembly was frustrating at a couple points. This was a completely foreign platform for me to assemble but it's together and passes all the function checks. I got a mec-gar cz75 17 rd mag for it. Much cheaper than an actual sar B6 mag and mec gar makes quality mags for other pistols I have. This was printed in elegoo paht-cf on my Bambu x2d using asa as support interface material. I'm looking forward to taking it to the range ☺️

Glock g29x build. Using all OEM parts. Frame is under g30x. The designer has it posted with known trigger issues. Upon assembly I did indeed have a dead trigger. It wouldn't release the striker. So I used an armorers backplate to get an idea of what was going on. What I ended up doing was filing a little material from behind the trigger shoe which gave me a little longer pull. I also noticed that the trigger housing rocked back and forth along with the rails in the rear pocket. I just added a small wedge to the back of the pocket by adding a modifier in orca slicer. After tweaking the added material and a few prints it now fully dry fires and resets. Range testing soon.

Printed in elegoo paht-cf on a Qidi q2 👍🏻

I recently purchased some pc-abs by sunlu after watching some testing videos on YouTube featuring it. It seems to have some really great characteristics. High heat resistance, impact resistance, and retains a lot of PC's resistance to creep. My first thought was of mags. I know there was an extensive test of filaments for mags a few years back in the original fosscad. The winning filament being PC-PBT. So I was curious to see how this somewhat affordable Sunlu pc-abs would do.

I printed a mag for the recession Ruger on my Qidi max 4. I used a generic PC profile and the print quality is pretty impressive. I've got it loaded up and plan on letting it sit for at least 90. I'll periodically check the feed lips on it to see if it's starting to suffer from creep. I'll update this along the way 👍

I made sure to offer a free view of my feet 😜