I build the stargate with paper and cardboard.
The groundplate was covered paper-mache and small stones.
At first I want to build a working one but I decide later on to make it abandoned.
The scientist-astronauts are investigating it.
My build from the abondened stargate is completed today. It was found on the moon and the scientist astronauts are inverigating it.
For a diorama i build a stargate from paper and cardboard.
At first I build a complete Stargate with a DHD, but today I got the Idea to make it as abondoned.
The lower part was cut off and I made a base.
On the base I build a bit with paper-mache and covered with glue and small stones.
For my crossover Diorama I build yesterday a stargate in scale 1/35 with paper and cardboard.
The first Pictures shows the whole stargate.
The other ones the mini-project
For the bottom I use paper-mache and glue some small stones on it.
The last days I did not take much pictures-
At the momemt its a lot of soldering work.
I prepare a small diorama with an Alien and i get the idea to make a small crossover.
In the time the glue has to dry I mafe some Alien-Eggs wit polymr-clay and a facehugger for my injured aytronaut on the medical unit.
After backing the eggs i colored them with my acrylic pens.
The fachugger i made withba lot of superglue and some thin wires.
After painting the facehugger i glued it into the face of the victim.
The last picture is the actual status of the wiring of the baseplate-
Now the crew is ready to enter the entire moonbase model. It took me a lot of time but the crew is great.
Every astronaut has an individual number on his suit and the crewmembers have individual characters. In the front you can see John Koenig, Paul and Prof. Bergmann.
The last days I worked on the base-plate and made one more fitting test for the buildings to set the final positions of the buildings.
A lot of wiring and soldering work is left and the build is going on.
I build the craters today with papermache and glued them in place if I had fixed the positions of the buildings.
After this, I glued some small stones and some sand on the base-plate.
If the glue was dry I put the plate in front of my carport and sprayed it with black, light-grey and a special granit-effect color.
Now today was the first test fitting of the entire model.
Yesterday I braced the underside of the second base plate.
This was the test if the buildings fit together and if the positions are right.
The quality of the pictures are not so good, because I have an issue with my mobile-cam.
The wiring is not complete but you can see the full size of the model.
The modle is 63inch wide (160cm) and 43,3 inch deep (110cm)
