

My first epoxy project.
Took me two days of work. Used table top epoxy for this. Started by sanding off the finish from the top. Primed with an epoxy black primer. Used epoxy tape to seal and dam the edge without edging. Bottom layer was a black epoxy mix to create the darkness. Then placed all the items over the black uncured layer. Poured 2 more layers of clear epoxy on top. Hardest part was edging the dam edge and sanding it down to 3000 grit because I had to be very careful not to sand the metal black paint on the tool cart. I did have to dispose of a batch of epoxy mix before I poured because I over mixed with a drill paint mixer so it looked white with all the micro bubbles and the torch and heating in a hot water tug were not effective at removing all the tiny bubbles.