First Long Tow in the Ranger - Any Tips?

Hi all, setting off on a 500 mile road trip tomorrow on I-80, from CO to SLC. Will be towing a uhaul 6x12, probably around 4,000lb total. I've done long towing trips before with my old Tundra and a racecar on a hauler, so I'll be fine with the basics. My only concern is going to be the long hills and wind on I-80. I have the trans temp monitor on the screen, have the trailer setup in the trailer app, and I'm prepared for getting 10ish mpg. Will be keeping it in Tow/Haul mode the entire way.

Any other tips? Thanks!

reddit.com
u/ClimbCarsChickensGuy — 11 days ago

Love This Truck

She's still mostly stock but the plan is to throw on some alpharex headlights, eibach pro 2r, wheels/tires, and sliders.

u/ClimbCarsChickensGuy — 2 months ago

Moving a Stove from Island to Wall?

Hi all, as the title suggests, how hard would it be to move a stove/oven unit from an island installation to a wall?

I've been looking at buying a house this year and have seen a ton of stove/ovens installed into the island in the middle of the room where it would be impossible to add a vent hood unless it came down from the ceiling and ruined the view into the open room.

I really want a nice vent hood for my stovetop so I can do legit high heat cooking inside year-round.

Thanks!

reddit.com
u/ClimbCarsChickensGuy — 2 months ago
▲ 3 r/razer

Blackshark V2 Pro - Amazing Hardware... Terrible Software.. Why I'm Switching from Razer

I'm done. I've been using the blackshark V2 Pro's for over a year and have tried my best to give Razer Synapse a fair shot.. I'm just done. More than half the time I turn the headphones on or turn my PC on, my audio profile doesn't load and I have to power cycle the headset 3-4 times in a row before anything sounds normal. The software turns my microphone off randomly, and I'm honestly very disappointed with the microphone quality as well, which is one of the main reasons for my purchase. The hardware itself is fantastic but the overall experience with Razer's software and consistent connectivity issues has made it impossible for me to use their products anymore. FYI, I'm on Windows 11 Pro with auto updates and I keep all drivers are up-to-date.

If someone on the Razer team sees this, please.. PLEASE... fix your software. You will continue to lose customers because of it.

reddit.com
u/ClimbCarsChickensGuy — 3 months ago

Virtuoso Wireless XT - Device Switching?

Hello all, I just purchased the Virtuoso RGB Wireless XT headset. I have been bouncing around different headset brands for a while and recently have been running the Razer Blackshark V2 Pro's, which I selected mainly for the microphone performance. Unfortunately, the software and connectivity have been incredibly finicky and extremely inconsistent. I was also pretty disappointed with the mic quality.

Anyways... I frequently switch my headset between my work laptop and my personal PC throughout the day and have been using a USB switch from Sabrent, which works well but I'd love to somehow eliminate it as I'm worried its reducing the sound quality.

I saw that I should be able to connect the XTs to my Laptop via bluetooth while also connected to my PC via the wireless dongle.. Would that decrease my battery life? Is there a way to segregate the modes so I can switch between them rather than hear both at the same time?

reddit.com
u/ClimbCarsChickensGuy — 3 months ago

Designing Network Setup for New Home

Hi everyone, I'm designing my network for a new house we're in the process of purchasing.

Here is a line diagram of the system and a list of what I think I'll need..
All lines will be wired with Cat 6a, except for one POE camera which will be a direct burial line out to a chicken coop. Depending on the wifi performance, I may expand to 3 mesh accesspoints, but I'd like to have those only handle WiFi and not have any ethernet running from them to devices. Any of the major pieces of equipment (PCs and Smart TVs) will be wired directly to the switch. I'm leaning towards sticking with TP-Link for the Router and Switch so its the same as my Deco, and ReoLink for the POE/NVR system.

Am I missing anything? Any obvious flaws or improvements? Thanks!

u/ClimbCarsChickensGuy — 3 months ago

Bumblefoot?

I noticed that one of my ladies has these dark spots on her feet, looks like bumblefoot to me.. feet aren't swollen at all and she is not limping or having any issues getting around. She's also broody right now so it's a little harder to gauge her behavior.

If it is bumblefoot, what should I do?

u/ClimbCarsChickensGuy — 3 months ago

Too Many Apples?

Hi everyone, I have two apple trees in my yard that are constantly shedding unripe apples onto the ground.

We have chickens so in the past, my compost bin was overfilled with wood chips from their bedding. I'm trying to swing it the other way by picking up the apples into a bucket, and using a drill auger to mash up the apples a bit and then adding that to the pile.

Is it possible to add too many apples?

reddit.com
u/ClimbCarsChickensGuy — 3 months ago

Dimensional Lumber for a Chicken Coop & Run - Lumber Yard Recs?

Hi all, planning on building a chicken coop and run structure later this year. Based on a full material list (some treated boards but mostly untreated boards, plywood, and some metal roofing) price quoted from Home Depot, it'll be around $1K. I'd love to give my business to a local-owned lumber yard instead of one of the big box stores. Any suggestions? Anyone know what yards consistently beat HD and Lowe's prices?

reddit.com
u/ClimbCarsChickensGuy — 4 months ago

Rally Armor Mudflaps - 24 XLT

Rally Armor Universal (Large) mudflaps! Used all OEM mounting points and a few longer push clips from Amazon. Think they came out pretty good.

u/ClimbCarsChickensGuy — 4 months ago

Threaded Holes in Bed!

Went to add some gear straps to the wall of my bed using riv-nuts but found out there are 3-5 threaded holes there from the factory. They're high underneath the bed rails. I used M6 bolts and a washer on each strap. Ended up adding a couple riv-nuts too. Fyi, this is on a 2024 XLT.

u/ClimbCarsChickensGuy — 4 months ago

Has Anyone Wrapped a 2024+ Ranger?

I'm looking to get some input on how difficult it would be to either PPF or wrap my 24 Ranger XLT. If anyone has done it, what amount of material would I need? 300 sqft?

Also, anyone have an opinion on Matte/Satin PPF on a Silver truck? Figured it might be cool to change the appearance a bit if I do go with PPF.

reddit.com
u/ClimbCarsChickensGuy — 4 months ago

Thoughts on the Ford Performance Tune and/or CAI?

The Ford Performance tune for the 2.3 (for my 2024 XLT) has a pretty steep price, but on paper the numbers look really good. For anyone who has done it, how has it effected your MPG? Additionally.. I wonder if adding a CAI kit, which also has added power/tq claims, would it add on or just mess up some of the tuning?

reddit.com
u/ClimbCarsChickensGuy — 5 months ago

Replacement Adjustable Headrest from Mustang

I know this is a known fix but I figured I'd post it.. the OEM headrests on my 2024 XLT are non-adjustable and tilted forward at a ridiculous angle.

The 2024 Mustang GT has an adjustable version that fits in the Ranger perfectly. The first image is of the OEM headrest and the second is the one from the Mustang. Much more comfortable and I think it still matches pretty close to the interior colors/materials!

u/ClimbCarsChickensGuy — 5 months ago

Hi everyone, been climbing for around 13 years and have tried a ton of different shoes throughout that time. In recent years, LaSportiva Solutions have been my main shoe for bouldering and sport climbing. Recently, I finally tried the Scarpa Drago LV for my hardest bouldering projects and have been loving them.

For my next shoe, I'd like to give Scarpa a shot for replacing my Solutions.. What are the main differences between the Instinct VS and VSR? Which do you think should be the "replacement" for the Solutions?

Thanks!

reddit.com
u/ClimbCarsChickensGuy — 5 months ago