u/Particular_Week_2754

I posted here while I was planning to buy it and received lots of feedback regarding it. I went with the purchase and I am very happy that I did.

It’s ‘21 4.2 V6 Express 2500. I got it for 23.5k with 38k miles on it. Masterack ladder rack and shelves were already installed by the previous owner.

Working out of a van is 300% more efficient than out of a smaller vehicle. I do many lighting upgrades for businesses. Ability to transport 42 troffer fixtures or 8’ linear lights at once while carrying all my tools and 4 ladders (12.8,6 and 12’ Little Giant)is a game changer. It saves time and prevents stress of forgetting something.

Also, it makes me look more official when I roll onsite with some big companies.

Inside the van I keep everything clean and organised to not waste any space and to save time looking for things .

To personalise it for my needs, I added a towing hitch with a 4-pin connector, 15% window tint, Diode Dynamics LEDs for head lights, 2-way alarm w/remote start and a small table tray inside the cabin since I often eat while I drive.

14k 22” 7.5mm 103g cuban,…….14k 24” 3.5mm 40g dc franco w/18g medallion…….950 platinum 3mm 42g heavy link w/12g cross .

Which combo looks best or by itself?

Basically this. I wanna get a new Grand Sport 1LT convertible . Everything standard except red callipers to match red leather. Total comes to 96k. I plan making a purchase next year. I hear that winter months can yield better discounts. For context, I am located near Seattle. Do you think I have a chance negotiating one below msrp, or this model is too new to expect any wiggle in price unlike the outgoing 6.2 stingrays?

While adding a new homerun for a microwave, I was deciding whether to land the existing hood fan cable to the microwave outlet box to safe off there or to remove entirely. Brief digging in the wall revealed some handyman special. Continuity tested to the near receptacles , it rang positive to jump from the bedroom receptacle on other side of the wall. This house is a safer place to live now. Easy peasy.

Picture of me wearing 24” ~2.5mm titanium chain.

After doing some research I ordered my first Cuban 14k 7mm 24” ~92g infinity link from DJI. I kinda wanted 18k but I couldn’t afford it.

I specifically went for 24” to be able to get it over my head avoiding the need for a lock. I am concerned with snugging box lock on clothes and weakening of the mechanism over time. Probably not a real issue just overthinking on my part. If I were to get a lock, I probably would have gotten a 22”, perhaps 8mm.

Just wanted to confirm if I made a good choice. I know with infinity link I lost the ability to fit pendants but I don’t really plan on it.

And if I ever change my mind, I would likely get a custom made one with a clasp lock on the pendant itself. Have anyone done this? What would be an appropriate weight pendant for that chain?

Would be interested to hear your thoughts and opinions.

Unfortunately I had to let some things go to help with the bills. I just posted it on watchexchange , so my loss could become your gain.

Feel free to ask any questions. The watch is also available for pick up in person if you’re around Seattle area.

Today I was replacing some wall pack lights and after taking reflector from one that had a missing lens, I found a birds nest behind it with at least three little birdies nesting there. Their momma sat on a tree branch above and was chirping. I carefully put the reflector in place and screwed it back using a hand screwdriver instead of the impact that I used to remove it.
As soon as I closed it and stepped away with my ladder, the momma bird immediately flew inside the fixture and tended to her babies.
I told the maintenance guy that I am skipping the particular light and will be back in a few weeks to finish.