u/Redraddle

I tested at first with a proper Nvidia GPU on a test bench PC and all worked great. Then I moved the files over to my laptop with an amd GPU. Because of this I had to use divagl to get it to run.

Almost everything works great. All of the 3d rendered background videos work great. But for some songs that just play a pre-rendered video it's just a black screen. The audio plays fine though (an example is the song "slump". Though weirdly for this particular song instead of it being a black empty void, miku is there just doing nothing for the whole song.)

Is there anything I can do about this?

>Be me

>Goes to a round1 during a vacation

>Spend too many points on claw machines

>Running low on points

>What do I do now

>I see the rhythm games

>This one with knobs looks interesting

>It's called sound voltex

>Play it twice to use the rest of my points

>Hooked immediately

>Need more

>No arcades near my hometown

>Promptly decided I need to build one

>Now I have one

It works but the image is very dim. It takes a while to warm up and this is at full brightness. As you can see one side is much darker than the other. Any ideas?

I got this lens for slightly less than $60 on eBay. The focus mechanism was completely seized, but the sellers pictures clearly showed a bit of foreign material in the focus mechanism. I took it apart to find a small bit of librarians tape had wrapped around and snapped off one of the rollers on the focus ring assembly. I used a soldering iron to melt the plastic around the wheel so that it would stay on. Don't worry as it didn't come off when pulled on fairly hard and still rolls smoothly. After I reassembled it it works great!

I love this goofy little 8mp camera. The images it takes are quite good in my opinion. It has a nice heft to it, but it can feel a bit cramped. It's just such a fun camera.

Obviously spectra film isn't made anymore. However, I have heard that 600 film can be used with some modifications. What and how do I have to modify to use 600 film?

I have a bunch of 18650 cells and would like to use them to retrofit an old RCA camcorder battery. The battery was 12v 900mah. I want to use 4x 18650 in series to produce more than 12v. Then use a small converter to output a steady 12v. However, obviously the original battery charger won't work, so I will need a diode to stop current from flowing into the battery. Finally I need some sort of charge board, preferably one that can charge from usb-c and indicate when fully charged. What would y'all recommend for this task?

​

Picture is of the cells in the case. There is a bit of room for small boards. The original nicd cells are next to it.

Got this camera for $60. Not sure if that's an ok price or not.

LG pw800 on the right and InFocus lp120 on the left.