u/fourtyonexx
r/MechanicAdvice r/s10 r/pools r/prius r/AirConditioners r/rav4club r/ryobi r/l4d2 r/treeidentification
▲ 2 r/prius
2006 prius, removed rear spoiler. Do i need to clean out anything? Seal up anything? Can i live with this broken off? Is it enough to put RTV/silicone/caulking around the dried foam & the mounting area to help seal it better? Straight on the bolts? Thanks.
u/fourtyonexx — 2 months ago
▲ 7 r/prius
Rear spoiler wing is peeling. Do i need a special procedure or just a “clear coat restoration” sanding procedure and use run of the mill clear coat since its plastic (thought it was CF) heres the wing.
u/fourtyonexx — 3 months ago
▲ 1 r/pools
Am i right in thinking that you have to have a pool cover (crappy tarp) fully submerged (minus the corners to physically anchor it) or fully out of water or else it becomes a breeding ground for algae from stagnant water? 3d printed TFT kit holder for attention.
Title.
u/fourtyonexx — 4 months ago
▲ 1 r/l4d2
Friend is in UK time zone, i am US Pacific. When it’s the 21st, for FRIEND, can they host and spawn Jimmy JR or does it have to be the 21st for us both? Can i host for friend when its 21st for them and NOT me? Thanks!!
Title.
Also, buff witch and nerf smoker, thanks.
u/fourtyonexx — 4 months ago
▲ 2 r/rav4club
2023 R4H limited. Messed up. Took splash shields off to drain and fill trans and left them off for a bit.. and the wheels ate the wheel well liners. :/. Anybody got a part number for them? Really upset at myself. Passenger and driver side, the cloth(?) AND plastic liner. Ugh
u/fourtyonexx — 4 months ago
▲ 3 r/pools
Forgot my kit outside overnight. Its currently 99° at 10am, probably got direct sunlight since 5:30am. There was condensation inside every bottle. Are they done for?
u/fourtyonexx — 4 months ago
Hopefully just a frozen over roof unit. Thawing it out with fan only. Air is colder than room. When the air feels significantly hotter than room temp, is it safe to assume its thawed?
All of this is secondhand info until 2pm.
At 6am, thermometer read 76f, set at 71.
79f by 7am. Unit seems to be “struggling” told em to take filter out by 7:30 (apparently it wasnt…)
82 by 10am
85 by 11.
I get home at 2pm and unit is running but there’s hardly any airflow coming from vents.
Set it to fan only and remove filter (it was very VERY dirty)
Its 3pm and its blowing coldish, over the span of 30 mins i can tell its blowing ‘harder’, while still being semi colder than room temp(80 as of 3)
Is it safe to assume its a frozen unit? Once the fan blow hot air (outside temp is 103, peak of 105 in an hour) am i safe to run the unit normally? Maybe wait an hour or two AFTER it blows hot to run it?
Thanks in advance.
u/fourtyonexx — 4 months ago
▲ 6 r/ryobi
Silly question but i have a dead battery. Anybody ever like, rebuilt and expanded one from 1.5aH to 5aH or something reusing the case or part of it? Thanks! I can 3d print or order parts, just unsure how to search the info i need.
u/fourtyonexx — 5 months ago
▲ 2 r/s10
Which one of these looms has the Ignition Control wire? 94 sonoma V6 4.3 TBI/vin Z 5spd. Passenger side under-dash looms.
u/fourtyonexx — 5 months ago