Image 1 — Which windows configuration would you choose?
Image 2 — Which windows configuration would you choose?
Image 3 — Which windows configuration would you choose?

Which windows configuration would you choose?

I am very curious which window configuration would you choose from the 3 above.

Some context:

All windows are to open to the inside. They would be regular tilt and turn uPVC windows.

So ground floor, at that window is the kitchen counter with a kitchen mixer on the right side, therefore the opening side downstairs is constrained to be on the left to allow opening.

First floor it's the master bedroom. Here we are also constrained to having the opening side on the right (opposite side than the ground floor) since having the opening side on the left would have the window in the middle of the room and make getting around difficult.

Therefore the main constraints here are ground floor window must have the opening side on the left while the 1st floor window must open on the right.

Bare in mind it would be very convenient to have an opening window downstairs for quick ventilation.

On the opposite façade (garden side) there's a large sliding door on the ground floor.

A: ground floor full width fixed + full width ventilation, first floor half fixed left - half opening right with ventilation

B: ground floor opening left - fixed right with ventilation, first floor half fixed left half opening right with ventilation

C: ground floor half opening left with ventilation - half fixed right, first floor left fixed, right opening with middle frame aligned to ground floor middle frame. ventilation on opening.

Sorry for the poor renders, I had to use Al. This is the best I could prompt it to do.

Appreciate if you add a short argument for your choice

u/val93 — 11 days ago

Toilet renovations

Hi Rotterdam,

For a long while we have been searching for someone to do a small toilet renovation (built-in toilet, tiles, plumbing). I have only come across two types of contractors, non serious ones that promise to call back but never do or out of this world expensive (4k-6k just for the labour for a 1.2x1.2m toilet). I understand that it's a small project and most contractors are busy but I still have some hope that someone will take it. I've already tried online services such as Werkspot.

If you have recently had sanitary renovation work done and we're happy with the results could you please recommend me your contact?

Also, if you have experience on the topic, what should my price expectation befor the labour (demolition, plumbing, tiling and sanitary fitting)?

reddit.com
u/val93 — 1 month ago

Behavior when having multiple usenet services

Say I have a Newznab addon and 2 services for usenet, built in AIOstreams and nzbdav pulling from another service via API. How does the system behave under the hood? Does it randomly pick a service to use? will it try the other service if it encounters a missing article?

reddit.com
u/val93 — 1 month ago

Near instant loading times: stream results and stream start.

Dear community,

I have been using Stremio for quite a while now. I have been very happy with public instances of AIOstreams, and various catalogues paired with TB and EN (Easynews++). I can basically watch 99% of content out there. Very rarely have I tried to watch something and not found a working stream.

But then my palace of solitude was shattered when I learnt you can have a free instance on Oracle cloud (OCI) - 2 arm CPUs, 12 GB RAM. So I started looking at self-hosting. Primarily to get better performance.

I hosted AIOStreams + Infinidysk (nzbdav fork).

In AIOStreams I set up the built in Comet w/ Torbox and Newznab with AltHUB.

Generally, I did not feel much of a difference between Usenet streaming and Debrid streaming. They both showed their pros and cons:

Debrid:
+ generally had more results, found results that Usenet did not, but I blame my indexer more than anything (still haven't purchased another indexer)
+ cheaper
+ easy to set up, just copy paste your API key.

Usenet:
+ streams start about 1 seconds faster.
+ seeking is faster, but not always

For my situation, I just see the setup I had before totally fine. The whole self hosting business was meant to reach near instant load times, but I was not able to. I am writing this post to, firstly ask if anyone has been able to achieve near instant load time while self hosting, and how?! And secondly, to let people know that the self hosting business is overated for the casual user.

Looking forward to getting your feedback!

reddit.com
u/val93 — 1 month ago

Triple glas PVC-kozijnen

Ik heb uitgebreid gezocht en naar mijn mening is dit de beste aanbieding die ik kon vinden qua prijs-kwaliteitverhouding.

Ik vind de prijs nog steeds erg hoog. Er is een levertijd van 6 maanden. Het bedrijf heeft een eigen fabriek en is VKG-gecertificeerd.

Wat vindt u, op basis van uw ervaring, van de prijs? En wat vindt u van de materialen die ze zullen gebruiken?

u/val93 — 2 months ago

Graszoden kopen

Ik ben op zoek naar een winkel waar ik graszoden kan kopen, maar overal staan belachelijk hoge verzendkosten. Weet iemand een winkel waar ik het zelf kan ophalen? Liefst op een redelijke rijafstand van Rotterdam?

reddit.com
u/val93 — 2 months ago

Current state of the art Nuvio setup

Hi all, just switched from Stremio to Nuvio, primarily due to profiles but I am starting to see many positives.

As such I was thinking that my trusty Stremio setup might need a refresh.

I am currently running AIOstreams with Cinemeta inside of AIOstreams (to provide nice posters everywhere) and Streaming Catalogues. This has served me very well for almost a year with minimal changes. I get poster ratings, nicely formatted and sorted streams and Cinemeta catalogues + numerous streaming services.

I've been browsing on this subredding and I see Xperience add on pop up a lot. As far as I gathered it's the new AIO style catalogue add on. Did I get that right?

Tl dr: I am running AIOstreams, Cinemeta and streaming catalogue. What is your current nice looking set up? Is Xperience + AIOstreams the current state of the art in nuvio?

reddit.com
u/val93 — 2 months ago
▲ 0 r/oneui

Is this a bug - quick panel shortcuts section

I can no longer add new shortcuts buttons, am I doing something wrong?

u/val93 — 3 months ago

Schuifdeur dilemma

Ik ben bezig met het tekenen van een contract voor nieuwe ramen. Als onderdeel van het proces zullen we ook een deel van de muur openbreken en een opening van 3,74m x 2,4m naar de tuin maken voor een schuifdeur. De schuifdeur bestaat uit 3 delen, waarbij het middelste deel het bewegende deel is van ongeveer 1,25 m breed. Ik heb twee topaanbiedingen die niet verschillen in prijs, maar wel in wat ze bieden.

  1. Aluminium schuifdeur met een enigszins verouderd profiel met een Uf-waarde van 3,0 + driedubbel glas en een normaal schuifmechanisme (Belisol Duorail Pure Slimline). Als alternatief bieden ze een hef- en schuifdeur aan, maar met dikkere profielen (Belisol Duorail Pure). Deze zal een insectenwering van een derde partij integreren.

  2. Een moderne, topklasse uPVC hef- en schuifdeur met geïntegreerde insectenwering (Schmidt Quinline 74 + Inscreen insectenwering)

Ik zou het zeer op prijs stellen als iemand zijn of haar mening kan geven over welke op de lange termijn een betere keuze zou zijn

Alvast bedankt.

reddit.com
u/val93 — 3 months ago

New servers

Does anyone have the new servers? I ordered from Cheaply, servers don't work anymore but he won't reply for days. It's happened in the past and an updated server URL does the job, just he's not answering....

reddit.com
u/val93 — 4 months ago

Grondisolatie

43m2, Er is wat verzakking in de grond, maar niet veel.

Twee vragen: hoe is de prijs? En heeft iemand anders dit al eens geprobeerd en een verbetering van de relatieve luchtvochtigheid in huis in de winter opgemerkt? In onze kruipruimte staat nooit water, maar in de winter kan het er wel vochtig worden. Normaal gesproken zien we in de winter een luchtvochtigheid van 70% bij een thermostaatstand van 20 graden. Het hele huis is voorzien van dubbel glas (niet HR++). Ik ben momenteel van plan om ook de ramen te vervangen, maar ik vraag me af of de isolatie van de grond ook een belangrijke rol speelt bij het verlagen van de luchtvochtigheid.

u/val93 — 5 months ago

L40s Pro Ultra review

I've realised something interesting today and thought I'd share.

Firstly, this vacuum is amazing. Have had it for months now and it's kept the group floor in great shape. It vacuums great, has not had a single tangled hair, seriously not once did I have to untangle something from it's main brush. Only the single middle wheel had some hair, more on that in a bit. Mopping is also good, considering a dog and cat. Doesn't need a lot of maintenance, you're reminded when the sensors need a wipe and water change. Vacuuming the filter is also easy enough.

So I've had to take it apart, dog was sick and let's just say the camera object identifying shouldn't be trusted with everything. So it does avoid everything well, but when it mattered most it didn't. So I decided between throwing it away or dive in for a deep clean (all the way to taking the wheels off). When I popped open the middle wheel it had some hair, nothing much and it came out super easy. On the topic of object avoidance, it's funny that it cannot handle chairs with non conventional legs such as in the photo. It keeps bumping into it pretty hard at times.

All in all, it has delivered well and I would not pass on owing this machine. Although it's not a miracle super smart object avoider and it still needs some love from time to time. When buying one get the one on discount, don't pay full price. 5 months in and the newer model came. Not much difference, higher suction and hotter water. You will not regret last year's model, nor will you feel like you're missing out.

u/val93 — 5 months ago

Aansluiting van keukenspoelbak op de hoofdriolering

Mijn gootsteen in de keuken loopt niet goed leeg. Ik heb een aannemer ingeschakeld om dit te laten doen, en mogelijk ook andere klussen in de toekomst. Het probleem vereist werkzaamheden in de kruipruimte. Eerst zullen ze de bestaande leiding opensnijden en controleren op verstoppingen. Ze vermoeden dat de leiding is verzakt, waardoor er een helling tegen de waterstroom in ontstaat. De buis moet vervolgens correct worden geplaatst. Bij werkzaamheden in de kruipruimte zijn twee personen vereist, dus de kosten bedragen 120 euro per uur, exclusief btw en materiaalkosten. De werkzaamheden zouden naar schatting 4 uur in beslag nemen. Meningen?

reddit.com
u/val93 — 5 months ago