u/Datumz_

So this is interesting, the POV head tracker which came out for the Luna Ultra, works with the X6 as well according to their website. I found two shorts featuring it working with the X6, here is one of them https://youtube.com/shorts/jK796gZRJDk?is=FJzeoVPOqr8-ogWT.

I make first person content, I wonder if this will make the camera follow my head if it was on my helmet, or if that would mess up the tracking since both the camera and my head are turning. It might only be for the camera if it was stationary.

I have the Ace Pro 2 and the X6 beats it in almost every way, as I record my daily content in 4k 60.

I already bought the Essentials bundle yesterday, and it was selling for $799, and the unit itself sold for $699. Why did the prices go up all of a sudden, almost $150 more for the essentials bundle. I'm in the US, so that's a weird price hike.

All riders involved were okay, some road burn and bruising I'm sure, but nothing broken. It was a mix of acceleration wobbles and braking for the turn. The second was pedal scraping.

To make a long story short.... I have been facing an issue which causes my printer to ram into the print bed or the print itself while printing. It's random when it happens, but it always happens, and it started to happen out of the blue. Attached are some pictures of the issues I'm facing. In some of the pictures you can see it did happen on the first layer, but not until over halfway through the first layer was printing with multiple color changes. And in the one calibration test you can see it happened on the second layer, where the first layer was fine. Occasionally it'll happen on the last layer where the nozzle starts running through the print.

Anyway my issue is I've been in contact with customer service, they have sent me parts multiple times now, and it seems like they are just throwing parts at the issue hoping something works, since they and myself don't actually know what is causing the issue. I cannot keep spending countless hours trying to fix this issue, my printer is now 5 months old and my printer has been down since March, and has been unusable. I've asked them for a replacement and they said that it's long past their replacement time window. However the United States has the Magnuson–Moss Warranty Act which is federal law, so Creality legally has to follow it.

Basically in the law it states if a reasonable number of attempts have been done to repair my unit by sending parts, and it still doesn't work, they legally have to replace my unit, but Creality is refusing. What is my best course of action to fix this issue if Creality is no help? I have dumped over $1500 into this printer with the cost of the printer and the CFS, as well as an upgraded nozzle. Many hours and at least 50 or more emails have been sent back and forth of the last couple of months, and I don't want the warranty to run out before I get my issue fixed.

Originally Creality tried to claim this was a clogged nozzle, which makes no sense, given that the filament is coming out fine. Then they tried to say it was a first layer issue, but again, it happens on every layer, not just the first.

I have a Vanmoof X3 that I've had since 2022 with an extended battery. It's in good shape as everything still works on it, some stuff I swapped from stock. I don't use it anymore, as much as I love the bike, I just have other means of transportation. It has around 1200 miles on it. What would be a price someone here might buy it for, or what should I sell it as.

Things I've changed or added-

Suspension seat post

Cloud 9 seat

New tires and tubes

New kickstand (stock broke)

Extend battery

New Grips

Front basket

Pannier bag

New charger (stock stopped working)

Phone mount on handle bar (super compact)

New rotors

I will be selling with the stock seat and stock seat post as well, and the original tool kit.

So I make YouTube content, and I've been watching back some of my shorts and the long forms I've posted, and the video looks so bad... It's recorded, exported and posted in 4k (30/60fps), but for some reason everything is grainy.

This is the video, just look at the first minute, when I'm on the bike path, the ground is super blurry and grainy, and all the trees look terrible. I don't know why it looks like this

https://youtu.be/jvRmmvyOdgA?is=Lb294On4ZXXFfkGU

I have every single Galaxy Bud that has been offered... Unfortunately this is not every wireless Samsung Bud to be offered, but it's close enough.

From top to bottom, the same row means the same release year-

Buds

Buds +

Buds Live

Buds Pro

Buds 2

Buds 2 Pro

Buds FE

Buds 3

Buds 3 Pro

Buds Core (International only)

Buds 3 FE

Buds 4

Buds 4 Pro

I've gone over my personal list before, and I separate it from best fit and best sound. The reason for that is because good sound doesn't mean it fits well, if I need to workout, wear it while I sweat, or just don't want to know it's in my ear, sometimes I'll sacrifice sound for better fit, arguably fit is more important anyway. Since there are a lot of buds here I'll only name the top five for each category, if anyone wants to know placement further than the top five ask and I'll reply, same goes with the reason for my placement. Finally, all of my buds that have silicone tips, except for the wing tip style buds, I have swapped the silicone for Comply foam tips, my ears don't work well with the silicone tips.

-Best Fit:

1. Buds Live

2. Buds, +, fe, core (all four wing tips)

3. Buds 4 Pro

4. Buds 3 Pro

5. Buds 3 FE

-Best Sound:

1. Buds 4 Pro

2. Buds 3 Pro

3. Buds FE

4. Buds 3 FE

5. Buds Pro

-Worst Sound:

Buds Core

-Worst Fit:

Buds Pro

-My Personal Favorite:

1. Buds 4 Pro

2. Buds FE

3. Buds Live

Why can't I make it where it has proper punctuation. I just want the first letter of the sentence capitalized, is it that hard??? The TT option makes everything capital, which is the ultimate option since the other two look terrible. Tt seems to make the first letter of each sentence capital, and makes the letters capital after the ' which makes no sense at all. And tt just looks weird. My old video editor made the first letter of each sentence capital, and provided correct punctuation.

Is there a way to make the first letter of the sentence capital?

I'm new to CapCut and I think I'll like it because it's very similar to what I use now, which is Inshot, but also I'll be able to use it on the PC if I get the Pro subscription, they have an insane deal going on right now, 1 year of Pro for $71.99. I had some problems getting it to apply, but finally I just got it to apply today. And they are offering "50%" off pro as well with an active subscription. The reason that's in quotation marks is because it's not actually 50% off for some reason, even though it says 50% off on the renew page, but it's still a decent deal at $108 a year for Pro. I'm hoping to enjoy using CapCut, seems super easy to use already.

I have every expansion except for the Homeland and related expansions, I've had these for almost two years now and never had anyone consistent to play with, but I think I finally found a group willing to learn and play. I just got done taking everything out of the bags in the boxes and storing them in containers for easier use and setup.

We met this week, we learned the entire base game and some landmarks, next we will introduce some hirelings, maybe the exiles deck, and one other character, not sure which yet. But I'm excited.

I calibrated my bed by using the tape mod under the build plate and I got my bed mesh to be no more then .2mm difference on the whole bed, and I'm still getting a first layer like this.... I'm not sure what to do. I can't adjust z-offset because some parts are too close while others are too far.

My printer was working mostly fine up until 3 days ago, where I was doing a print (print 1) and the top 2-3 layers of the print started to get hit by the nozzle as it was being printed. Then I tried to do another print (print 2), I was printing the same shape as when I first noticed an issue, but just more of them on the bed, the first color was the outline in black, which printed out fine, then the white which also printed fine, then the orange came and did what you see in the video. I came back to the print head stuck on the side of the print bed. So I test printed a multicolor benchy, and it came out fine. Then I another print (print 3) with the same gcode as the second print. This time the same thing happened as the second print where the nozzle got stuck on the side of the print bed after scraping the print bed quite a bit, both times it printed it printed the first two colors perfectly, then it completely started ruining the build plate on the third color placement. So I changed some stuff on the slicer, to get some new gcode and then print the new gcode, and the second half of the video is the result of the fourth print. I was able to catch the exact moment the issue of the nozzle scraping the build plate happened. And again it was on the second orange placement that it messed up at. I'm not sure what is going on, it's not gcode related. I ruined two build plates, one was double sided which is why I was able to get three prints that messed up.

This is the K1 Max, has anyone else faced a similar issue. I contacted support and I'm waiting on results. They haven't replied yet.

I was able to fix this on all vehicles that allow you to use the arrows to steer, but with the helicopter you can't change the controls. Whenever I press the up or down button for the helicopter, it also moves the joystick even though I'm not pressing that side of the screen. This has been happening for a couple of months now and I have been unable to fix it. It's not my display as my touch points are turned on, and you can see I'm not touching the joystick when also pressing the up and down for the helicopter. There were some parts where I did touch it, but you should be able to see when I don't.