u/FamiliarDirection563
BYOB in den Hague 5th October
https://rndr.studio/ in The Hague held their first BYOB (Bring Your Own Beamer [what Europeans call a projector] www.BYOBworldwide.com) last night and it was a great success. Ten people throwing various visuals projects on the walls. Not only was it fabulous seeing people's various projects, the most interesting part (and a surprise) was when we took it in turns to tell everyone about our work.
Congratulations to the organisers. I plan on making one happen next year in Brisbane, Australia.
Am I wasting my time exporting?
Bill just came in.
As the title suggests, if I export 223kWh and get 2c, why am I bothering?
Some plugins worth checking out
Check out this repository https://github.com/stoatworks-labs Some of these are excellent, a couple don't work properly but they are all worth playing with.
The dev is quite responsive to bug reports and feature requests.
I have no affiliation with this except that I found them and think they are worth sharing...and I made a modest donation.
How do I prioritise exporting rather than storing under certain conditions?
TL;DR - knowing that our battery will fill up from 1100hrs, I want to sell what we produce until then, but only while there is > 20% in the battery
≠≠≠
This morning is pretty typical in SE Qld this time of the year. Bright clear skies, loads of solar going into battery which was about 40% full when we woke up. Nothing being exported.
We are with globird so get 3 hours free energy from 1100hrs during which the battery always fills up.
Without spending money on something like a Pi for Home Assistant, is it possible to set the system to something like "if there is more than 20% in the battery at 0800hrs export any solar produced, but do not export from the battery"?
I realise the FIT isn't huge, but a steady dribble is better than nothing.
[SOLVED] Thanks to u/PurePin3232, here is the solution
>Have a look at time based control under System Setting > Energy Management Setting. Can be achieved through setting a period of discharge. With the “Discharge cut-off of Soc from bat to grid” as 20%.
That way it will only discharge if the battery is above 20%
Now they have changed the rules, I'm going to request a Club Jetstar refund
Like the title says...and I hope it starts a tsunami of refund requests and also some legal nudge.
I joined on the basis that carry on was included in the price. Unless the "pay to join frequent flyer programme" offers the same benefit, then I deserve a refund.
IANAL but I suspect consumer law might back me up.
Or am I delusional?
FWIW, it isn't about the money, there simply a level to which I will not stoop.
How come one of my gmail tabs has an unread count?
I always have a number of accounts open in tabs. Not sure when it started, but the primary account now has an overlay with the number of unread emails.
It isn't a problem, but I am curious what is going on.
Win11, firefox
First month with GloBird
We installed a 16kW sigenergy battery last month and just ended our first full month with globird.
Just got an email "your latest bill is ready".
I knew we had hit the zerohero every day and hadn't paid for anything from the grid, so I was very keen to see...
Opened the app: $1.79 !!! I let out a "how great is this" yell.
Then I noticed
CREDIT $1.79
w00t!
Prior to that we were with Amber...would have had a $25 monthly fee (liable to increase over time) had we not switched.
[UPDATE] I hadn't really looked at the bill, getting a Qld govt rebate of about $30 helped :P
Should I believe the app's AI calculation?
Not sure if it was in the old version and I had never seen out, but found an AI suggestion page telling what a good job it could do.
Is it bullshit?
Got my APC40MkII - use the native mapping or create my own?
Just received my APC40MkII. You would think that Amazon would wrap it in neutral paper rather than ship it in the original box so that when it is left on the doorstep it is a less tempting target...but no.
Avenue comes with a native mapping included. Do people find it is good enough or is it worth the considerable effort to do my own mapping?
One consideration is that if I am ever on someone else's unit, and we both have custom mapping, then confusion is sure to reign.
On the other hand, the native mapping may be ideal.
Opinions are as valuable as facts 😉
Is it possible to have a setting e.g. if battery is over x% at y o'clock, then discharge to grid?
First month with a new sigenergy 16kW battery on old solar array and couldn't be happier, have paid for 0 kWh so far.
Well, I could be happier. We get 3 hours of grid energy for free 1100 - 1400. Generally our battery is around 40% charged in the morning as the sun hits the panels. So why not sell that to the grid?
Is it possible to set to sigenergy app to say "if the battery is over 30% at 0900, discharge until 1100 unless it drops to 10%"
I suspect I could do this with home assistant, but I want to keep the setup relatively simple.
Aussie going to be in Netherlands in September - any 1 day festivals?
G'day all, my Dutch wife and I are going to be in the Netherlands during September. We go to raves and festivals often and are wanting to do something special while there.
We won't have any of our usual camping gear so I suspect a one day event will be best.
What about an amazing club in Amsterdam? Berlin? (Where I am lobbying to visit, just for the club experience 😀)
I've done a bit of research and haven't turned up anything yet. Maybe locals or someone in the know can help - any suggestions would be really appreciated.
Do you implicitly trust or not trust Meta apps "end to end encryption"?
The title says it all really. I'm referring mostly to WhatsApp but also Messenger. Are chats really private?
Adapt or die: the Australian live music lovers trying to reinvent an ‘ancient’ and ‘unviable’ industry
Get out and enjoy some live music or soon there won't be any. Mo's Desert Clubhouse (mentioned in the article) is my local venue...it is also my favourite.
TouchOSC instead of buying an Akai AC 40 Mk2?
I have TouchOSC and before I buy an APC 40 I am wondering if anyone has weighed up the pros and cons of each.
If there isn't a template for TouchOSC I know there is a lot of work creating one. But it is cheaper than the hardware.
But the hardware is likely more robust than TouchOSC.
Your thoughts and experiences?
[Edit] damn I wish the title could be edited...
First crack at using a GoPro in a live set
Years ago I was given a GoPro that was a bit corroded and the little doors wouldn't open. It took a fair bit of gentle work but I eventually freed them all. But not being a sporty type, I rarely use it.
Then I saw some video of an event where the VJ had included a camera. I've played with a web cam, but never took it any further. Last night at an open HDMI event I decided to see what I could do with the GoPro. Delighted with what I created on the fly in Resolume
It's now going to be a permanent fixture...but used sparingly
Australians to pay at least 20% more for iPads and Macbooks after Apple hikes prices citing AI
https://www.theguardian.com/technology/2026/jun/26/apple-ipad-macbook-price-rise-australia
They forgot to add how much AI is helping us.
I had claude write me a python script to move unused media files
I've been using Resolume for about 18 months and it took a while get my own workflow figured out. Until then I was dropping all media into a single directory, whether I used it or not. Obviously it wasn't long before it was a great resource, but a mess.
I wanted to sift out the unused files, but there is no native way to do this.
I'm too old to learn Python. But I am old enough to remember how we thought it was fun (and clever) to go into the new computer shop and run a GOTO loop on the screen in Basic :o)
Thanks Claude for the script. It isn't perfect. In a comp with 128 columns and 200 or so clips, about 10 files shouldn't have been moved, but "relocate" shows them and they can easily be moved back manually.
I hope it is useful for someone. There is room for improvement, go ahead.