u/InfiniteLight07

Hey everyone,

My Orbi RBE871 router keeps restarting. I have a few theories being either my Xfinity modem is causing some sort of instability, or the power adaptor could be bad. It randomly happens maybe 2-3 times a day, where the router restarts and boots back up perfectly fine. Parental controls are off. Sorry if I’m not giving enough info, I don’t know much about this stuff.

First it was Fanatec who got colonized, now it’s Trak Racer.

Jokes aside, I hope this improves Trak Racer’s spotty reputation in the community.

Mine is ACE Combat 7 at 41 hours.

Edit: I meant Paid mb

So my CSL DD with the Boost Kit has been having some issues in Assetto Corsa Competizione. It has two different behaviors. One is when it gets stuck rotating right via the motor. The other is when it violently snaps to the left with full power. Note that it isn’t a calibration error as I can pull it back to center but it snaps to 225 degrees because my sensitivity is 450. I’ve looked through older threads though those are from many years ago and are probably outdated. I’ve tried updating the firmwares, reseating the QR2 base side shaft, and I’ve tried tweaking the settings around. Nothing has fixed it.

I can drive maybe from my pit box to the pit exit before it happens, which is the span of roughly 10-20 seconds. Other than that, I have no clue how to fix this.

Firmware Versions: All latest for my CSL DD, CSL GT3 wheel, and Base Motor.

Other notes: It also happens in other games like BeamNG and I have tried using the original 5Nm power supply with no luck

So my CSL DD with the Boost Kit has been having some issues in Assetto Corsa Competizione. It has two different behaviors. One is when it gets stuck rotating right via the motor. The other is when it violently snaps to the left with full power. Note that it isn’t a calibration error as I can pull it back to center but it snaps to 225 degrees because my sensitivity is 450. I’ve looked through older threads though those are from many years ago and are probably outdated. I’ve tried updating the firmwares, reseating the QR2 base side shaft, and I’ve tried tweaking the settings around. Nothing has fixed it.

I can drive maybe from my pit box to the pit exit before it happens, which is the span of roughly 10-20 seconds. Other than that, I have no clue how to fix this.

Firmware Versions: All latest for my CSL DD, CSL GT3 wheel, and Base Motor.

Other notes: It also happens in other games like BeamNG and I have tried using the original 5Nm power supply with no luck

So my CSL DD with the Boost Kit has been having some issues in Assetto Corsa Competizione. It has two different behaviors. One is when it gets stuck rotating right via the motor. The other is when it violently snaps to the left with full power. Note that it isn’t a calibration error as I can pull it back to center but it snaps to 225 degrees because my sensitivity is 450. I’ve looked through older threads though those are from many years ago and are probably outdated. I’ve tried updating the firmwares, reseating the QR2 base side shaft, and I’ve tried tweaking the settings around. Nothing has fixed it.

I can drive maybe from my pit box to the pit exit before it happens, which is the span of roughly 10-20 seconds. Other than that, I have no clue how to fix this.

Firmware Versions: All latest for my CSL DD, CSL GT3 wheel, and Base Motor.

Edit: It also happens in other games like BeamNG

ACC’s penalty system is absolutely terrible. I get that it isn’t to make a system to better analyze collisions but this is absolutely unplayable. As an example, yesterday I was turning in a corner when some guy cut through the grass and rammed into me. I was driving normally and he cut the corner, but we BOTH got a safety rating penalty. Many other times are when some people just don’t leave space and turn straight into. Also once going into Monza T1, I was doing a risky overtake when I was pushed. I agree it was my fault and the other person’s fault because we both didn’t leave space but then when we both spun out and hit someone else, THEY got a penalty for doing nothing wrong. I lose SA for so many things I just didn’t do, and I feel like this is making progression harder. I don’t know any solutions. Potentially a vote kick/penalty system, where any drivers who were near the incident could vote. I can’t make these decisions but it shouldn’t be punishing people who did absolutely nothing wrong.

ACC’s penalty system is absolutely terrible. I get that it isn’t to make a system to better analyze collisions but this is absolutely unplayable. As an example, yesterday I was turning in a corner when some guy cut through the grass and rammed into me. I was driving normally and he cut the corner, but we BOTH got a safety rating penalty. Many other times are when some people just don’t leave space and turn straight into. Also once going into Monza T1, I was doing a risky overtake when I was pushed. I agree it was my fault and the other person’s fault because we both didn’t leave space but then when we both spun out and hit someone else, THEY got a penalty for doing nothing wrong. I lose SA for so many things I just didn’t do, and I feel like this is making progression harder. I don’t know any solutions. Potentially a vote kick/penalty system, where any drivers who were near the incident could vote. I can’t make these decisions but it shouldn’t be punishing people who did absolutely nothing wrong.

This happens when I am not holding tight enough. It doesn’t happen in any other game. Does anybody know why?

Fanatec CSL DD 5Nm

Fanatec CSL Elite WRC wheel

Torque in Fanatec App set to 100%, Torque in game set to 75%

Wheel rotation at 720 degrees

Edit: Game is Assetto Corsa, how tf did I forget

I can't extrude sketch 4. Won't let me click on it while making an extrusion. Just selects extrude 1.

https://preview.redd.it/c7mn17de490h1.png?width=1823&format=png&auto=webp&s=d0cbfcc8bf08872c5d376d151d40ba723080bef9

EDIT: SOLVED
I had to select each individual curve/line :/