u/Perparim_Pepe

https://makerworld.com/models/2806352?appSharePlatform=copy

✨New model: Parametric Honeycomb Pen Holder Box Generator ✨ the gamechanger!

This is not just a fixed organizer, but a fully parametric generator for your own honeycomb storage box. It is completely free.

Simply measure your available space:

✅ A = width

✅ B = Height

✅ C = Minimum number of pens

✅ D = pen/object diameter

✅ E = angle of inclination, recommended 10°-30°

Then click Generate - and the box is automatically created based on your parameters.

Perfect for:

🖊️ Pens

🎨 Acrylic markers

✏️ Pencils

💄 Labello & Lipgloss

🧂 Spice cans

Small parts 🧰

Desk, studio, kitchen or make-up table 🖥️

The last row is automatically filled. Therefore, the finished box can have more seats than entered. If the print volume of 256 x 256 x 256 mm is not sufficient, additional stackable parts are automatically created.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is attached and explains all parameters step by step.

The parts are stackable vertically. For larger variants, I recommend fixing them with glue or Velcro tape.

If there is enough interest, I will also create a version with a horizontal extension.

Please contact us if you have any problems.

If you like the model, I'm really happy about Like, Boost, Follow, Download or a comment with your print.

Thanks for your support! ❤️

© WunschStück3D

https://makerworld.com/models/2806352?appSharePlatform=copy

https://makerworld.com/models/2806352?appSharePlatform=copy

✨New model: Parametric Honeycomb Pen Holder Box Generator ✨

This is not just a fixed organizer, but a fully parametric generator for your own honeycomb storage box. It is completely free.

Simply measure your available space:

✅ A = width

✅ B = Height

✅ C = Minimum number of pens

✅ D = pen/object diameter

✅ E = angle of inclination, recommended 10°-30°

Then click Generate - and the box is automatically created based on your parameters.

Perfect for:

🖊️ Pens

🎨 Acrylic markers

✏️ Pencils

💄 Labello & Lipgloss

🧂 Spice cans

Small parts 🧰

Desk, studio, kitchen or make-up table 🖥️

The last row is automatically filled. Therefore, the finished box can have more seats than entered. If the print volume of 256 x 256 x 256 mm is not sufficient, additional stackable parts are automatically created.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is attached and explains all parameters step by step.

The parts are stackable vertically. For larger variants, I recommend fixing them with glue or Velcro tape.

If there is enough interest, I will also create a version with a horizontal extension.

Please contact us if you have any problems.

If you like the model, I'm really happy about Like, Boost, Follow, Download or a comment with your print.

Thanks for your support! ❤️

© WunschStück3D

https://makerworld.com/models/2806352?appSharePlatform=copy

Parametrischer Stiftehalter Modell

✨ Neues Modell: Parametric Honeycomb Pen Holder Box Generator ✨

Edlich ist der Gamechanger fertig! ❤️

Das ist nicht nur ein fester Organizer, sondern ein parametrischer Generator für deine eigene Waben-Aufbewahrungsbox. Die Reihen und Höhen werden automatisch anhand deines verfügbaren Platzes berechnet. Ausserdem werde Ausbauteile erstellt wenn das Druckbett nicht ausreicht aber genügend Höhe beim Stellplatz vorhanden ist.

Testet es aus!

Einfach deinen verfügbaren Platz messen:

✅ A = Breite

✅ B = Höhe

✅ C = Mindestanzahl Stifte

✅ D = Stift-/Objektdurchmesser

✅ E = Neigungswinkel, empfohlen 10°–30°

Dann auf Generieren klicken – und die Box wird automatisch anhand deiner Parameter erstellt.

Perfekt für:

🖊️ Stifte

🎨 Acrylmarker

✏️ Bleistifte

💄 Labello & Lipgloss

🧂 Gewürzdosen

🧰 Kleinteile

🖥️ Schreibtisch, Studio, Küche oder Schminktisch

Die letzte Reihe wird automatisch aufgefüllt. Deshalb kann die fertige Box mehr Plätze haben als eingegeben. Wenn das Druckvolumen von 256 × 256 × 256 mm nicht ausreicht, werden automatisch zusätzliche stapelbare Teile erstellt.

Eine detaillierte Anleitung für den Bambu Lab / MakerWorld Parametric Model Maker ist beim Modell beigefügt und erklärt alle Parameter Schritt für Schritt.

Die Teile sind vertikal stapelbar. Bei größeren Varianten empfehle ich, sie mit Kleber oder Klettband zu fixieren.

Bei genügend Interesse werde ich auch eine Version mit horizontaler Erweiterung erstellen. Außerdem bin ich gerade dabei eine Auswahl für die Hülsenform zu erstellen (Hex, Rund, quadratisch, oval, rechteckig)

Meldet euch gerne, falls ihr Probleme habt.

Wenn euch das Modell gefällt, freue ich mich sehr über Like, Boost, Follow, Download oder einen Kommentar mit eurem Druck.

Danke für eure Unterstützung! ❤️

(C) WunschStueck3D

Parametrischer Stiftehalter Modell

Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld
The GameChanger is here!
✨ New Model Release: Parametric Honeycomb Pen Holder Box Generator ✨

I spent many free days, nights and weekends programming this model from zero — and now it is ready! ❤️

This is not just a fixed organizer. It is a fully parametric generator for creating your own custom honeycomb storage box.

Just measure your available space:

✅ A = Width
✅ B = Height
✅ C = Minimum number of pens
✅ D = Pen / item diameter
✅ E = Tilt angle, recommended 10°–30°

Click generate — and the box is automatically created based on your parameters.

Perfect for:

🖊️ pens
🎨 acrylic markers
✏️ pencils
💄 lip balm & lip gloss
🧂 spice jars
🧰 small items
🖥️ desk, studio, kitchen or vanity organization

The last row is filled automatically, so the final box may have more slots than entered. The model also creates additional stackable parts if the 256 × 256 × 256 mm build volume is not enough.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is included and explains every parameter step by step.

The generated parts are vertically stackable. For larger versions, I recommend fixing them with glue or hook-and-loop tape.

If there is enough interest, I will also create a version with horizontal expansion.

Feel free to contact me if you have any problems.

If you like the model, I would be very happy about a like, boost, follow, download or comment with your printed version.

Thank you for your support! ❤️
© WunschStück3D

Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld
The GameChanger is here!
✨ New Model Release: Parametric Honeycomb Pen Holder Box Generator ✨

I spent many free days, nights and weekends programming this model from zero — and now it is ready! ❤️

This is not just a fixed organizer. It is a fully parametric generator for creating your own custom honeycomb storage box.

Just measure your available space:

✅ A = Width
✅ B = Height
✅ C = Minimum number of pens
✅ D = Pen / item diameter
✅ E = Tilt angle, recommended 10°–30°

Click generate — and the box is automatically created based on your parameters.

Perfect for:

🖊️ pens
🎨 acrylic markers
✏️ pencils
💄 lip balm & lip gloss
🧂 spice jars
🧰 small items
🖥️ desk, studio, kitchen or vanity organization

The last row is filled automatically, so the final box may have more slots than entered. The model also creates additional stackable parts if the 256 × 256 × 256 mm build volume is not enough.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is included and explains every parameter step by step.

The generated parts are vertically stackable. For larger versions, I recommend fixing them with glue or hook-and-loop tape.

If there is enough interest, I will also create a version with horizontal expansion.

Feel free to contact me if you have any problems.

If you like the model, I would be very happy about a like, boost, follow, download or comment with your printed version.

Thank you for your support! ❤️
© WunschStück3D

Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld
The GameChanger is here!
✨ New Model Release: Parametric Honeycomb Pen Holder Box Generator ✨

I spent many free days, nights and weekends programming this model from zero — and now it is ready! ❤️

This is not just a fixed organizer. It is a fully parametric generator for creating your own custom honeycomb storage box.

Just measure your available space:

✅ A = Width
✅ B = Height
✅ C = Minimum number of pens
✅ D = Pen / item diameter
✅ E = Tilt angle, recommended 10°–30°

Click generate — and the box is automatically created based on your parameters.

Perfect for:

🖊️ pens
🎨 acrylic markers
✏️ pencils
💄 lip balm & lip gloss
🧂 spice jars
🧰 small items
🖥️ desk, studio, kitchen or vanity organization

The last row is filled automatically, so the final box may have more slots than entered. The model also creates additional stackable parts if the 256 × 256 × 256 mm build volume is not enough.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is included and explains every parameter step by step.

The generated parts are vertically stackable. For larger versions, I recommend fixing them with glue or hook-and-loop tape.

If there is enough interest, I will also create a version with horizontal expansion.

Feel free to contact me if you have any problems.

If you like the model, I would be very happy about a like, boost, follow, download or comment with your printed version.

Thank you for your support! ❤️
© WunschStück3D

The GameChanger is here!
✨ New Model Release: Parametric Honeycomb Pen Holder Box Generator ✨

I spent many free days, nights and weekends programming this model from zero — and now it is ready! ❤️

This is not just a fixed organizer. It is a fully parametric generator for creating your own custom honeycomb storage box.

Just measure your available space:

✅ A = Width
✅ B = Height
✅ C = Minimum number of pens
✅ D = Pen / item diameter
✅ E = Tilt angle, recommended 10°–30°

Click generate — and the box is automatically created based on your parameters.

Perfect for:

🖊️ pens
🎨 acrylic markers
✏️ pencils
💄 lip balm & lip gloss
🧂 spice jars
🧰 small items
🖥️ desk, studio, kitchen or vanity organization

The last row is filled automatically, so the final box may have more slots than entered. The model also creates additional stackable parts if the 256 × 256 × 256 mm build volume is not enough.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is included and explains every parameter step by step.

The generated parts are vertically stackable. For larger versions, I recommend fixing them with glue or hook-and-loop tape.

If there is enough interest, I will also create a version with horizontal expansion.

Feel free to contact me if you have any problems.

If you like the model, I would be very happy about a like, boost, follow, download or comment with your printed version.

Thank you for your support! ❤️
© WunschStück3D
Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld

A fully parametric honeycomb organizer generator for pens, markers, spice jars, lip balm, lip gloss and small items. Measure your space, enter your values and generate your perfect custom box for free.
Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld

A fully parametric honeycomb organizer generator for pens, markers, spice jars, lip balm, lip gloss and small items. Measure your space, enter your values and generate your perfect custom box for free.
Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld

A fully parametric honeycomb organizer generator for pens, markers, spice jars, lip balm, lip gloss and small items. Measure your space, enter your values and generate your perfect custom box for free.
Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld