u/SignificantOwn2920

I need these plants for my tank but since sreepadma charges 300 for shipping it doesnt make sense to pay 50% of the cart price for shipping. Tried lfs but they only get pots and tc.
So if anyone's ordering from them and your order is above 2000 you can add my order and get free shipping. Or we could split shipping charges if the total order is under 3000

Edit: Ordered from Sreepadma. The hassle of finding others to club orders with or purchasing from multiple websites (since no one website has all these plants in stock) isnt worth it.

Here are the details,

High Pressure Gauge: Works fine. When the main tank valve is opened with the regulator adjustment knob completely backed off (loose), the cylinder gauge reads \~1000 PSI and there are zero leaks.

​Working Pressure Gauge: Mechanically dead. It stays stuck at 0 PSI no matter what, only twitching slightly during a rapid final system bleed.

​Relief Valve Venting / Output Issue: With downstream equipment removed(just the regulator connected to the cylinder and nothing extra) turning the regulator knob clockwise allows a slight gas hiss out of the outlet at first. Turning it further causes roughly 75% of the gas to vent from the outlet port and 25% to blow violently out of the safety pressure relief valve. This almost reverses if I add a solenoid and control valve to the regulator. Majority gas goes through the relief valve and bit from the outlet.

​Also I've used a brass adapter in the female outlet port of the cylinder and seems like its permanently seized in place. Tried getting it out to see if thats whats causing the issue but you can't move it. Took it to an industrial workshop but they couldnt get it out using spanners either.

If anyone knows what's happening, it would be of great help.

​

Here are the details,

High Pressure Gauge: Works fine. When the main tank valve is opened with the regulator adjustment knob completely backed off (loose), the cylinder gauge reads ~1000 PSI and there are zero leaks.

​Working Pressure Gauge: Mechanically dead. It stays stuck at 0 PSI no matter what, only twitching slightly during a rapid final system bleed.

​Relief Valve Venting / Output Issue: With downstream equipment removed(just the regulator connected to the cylinder and nothing extra) turning the regulator knob clockwise allows a slight gas hiss out of the outlet at first. Turning it further causes roughly 75% of the gas to vent from the outlet port and 25% to blow violently out of the safety pressure relief valve. This almost reverses if I add a solenoid and control valve to the regulator. Majority gas goes through the relief valve and bit from the outlet.

​Also I've used a brass adapter in the female outlet port of the cylinder and seems like its permanently seized in place. Tried getting it out to see if thats whats causing the issue but you can't move it. Took it to an industrial workshop but they couldnt get it out using spanners either.

If anyone knows what's happening, it would be of great help.

I was going to get this since it produces very fine bubbles but if anyone has used something better please share it

Got them a week back and they went to sleep for like a day or two. No movement nothing. After that I could see their heads out of their shell and they go back in after sometime and that's all they do. All this while on their sides, they dont stand up. Tried helping them to stand but they fall back to their sides after a while.

They were in transit for 3-4days could it be transportation stress? They looked pretty active when they arrived.

Seller kept them in tap water, I use tap+ro mix

Tank TDS ~370 at the moment

Gh ~11-12

NH3 0

NO2 0

NO3~0

Temperature ~26°C

Got 20 of these 2 days back and they are very active.

​

Just noticed this morning when the lights turned on this specific individual has discolouration pigment near his dorsal fin (copper/gold color is due to the lighting) which runs symmetrical on his other side too (it ends right above where the blue line meets the red.) I'm pretty sure he didnt have this yesterday bevause it is very much visible to the naked eye. Others in his shoal seem to be fine.

He's having no trouble breathing or swimming and seems fine otherwise.

Its been over 3 weeks since the tank was cycled. I also have a dozen Neocaradina shrimps in the tank and one male guppy.

Ph: ~7.5

GH: ~11.2 DGh

Any help would be appreciated, thank you

Got 20 of these 2 days back and they are very active.

Just noticed this morning when the lights turned on that this specific individual has developed a copper/gold pigment near his dorsal fin which runs symmetrical on his other side too (it ends right above where the red line meets the blue) I'm pretty sure he didnt have this yesterday bevause it is very much visible to the eye. Others in his shoal seem to be fine.

He's having no trouble breathing or swimming and seems fine.

Its been over 3 weeks since the tank was cycled. I also have a dozen Neocaradina shrimps in the tank and one male guppy.

Ph: ~7.5

GH: ~11.2 DGh

Any help would be appreciated, thank you

Size S

Mrp Rs 6975

Selling it for 4500

Dm if interested

Shop said bloody mary but I'm skeptical. Been a day since I got them, upper half is lighter and translucent while the lower back is darker. There's two juveniles in the tank about 1.25cm and theyve got good colors too.

Location India