Trying to find a way to tighten up my low E string on my Pia
I have a Pia and it's been my main workhorse for more shreddier music but I find the low E is lacking in the tightness I need and it sounds more muted than the other strings. I find I'm fighting it more.
When compared to longer scale length guitars I have, like my Kiesel Vader and Strandbergs, I find those (obviously) holds tension better on the lower strings and they ring out better without buzz.
My current setup is:
- a 9-42 NYXL set with action set at 1.2 - 1mm from low E to high e.
- Neck relief is at around 0.4mil.
- There is an ever so slight buzz from frets 1-4, but there's enough neck relief for the higher frets.
Should I try reducing the bridge height on the low end and straighten out the neck more?
Would a higher gauge string tighten up.
The frets are pretty well rounded except for the 22nd fret that feels much higher than the rest of the frets. I'm planning on sanding it down during my next string change.
Any advice on how I can get that Spiro Dussias level tightness on 25.5" scale length on the low E?