u/Bowling_Meatball
WCGW driving through a flood
WCGW while putting back the barbell
Always use caution when jumping a fence
Running into a 1000 ducktapes
Either I’ve lost brain cells watching this, or I just witnessed peak comedy.
Dana new superstar, a modern-day Jet Li.
Send her the contract, Hunter.
Machete, baseball bat, wrestling moves, and ice cream, this has it all.
[deleted]
Pool pump or timer
Hello All,
I noticed my pool pump was not turning over and when I attempted to turn it on manually, by pressing the button, it made an attempt turn the pump on for all of a second and everything turned off. No strange noises, no popping or smoking just dead. Pump is about three years old.
What I have done since, the GFI is working and I have other items plugged that work. I’ve turned the breakers on and off. Today I used a multimeter and got 120 volts on each NO2 COM2 and 120 volts on NO1 COM1. I got a total of 240 volts on AC. No lights on the digital timer. Is it possible that the board inside the timer is fried? I don’t smell anything and I don’t see anything burnt. The wires appear to be totally intact. Can someone please let me know what I’m missing? Is it possible that the pump itself is not good? I wouldn’t even know how to test the pool pump. Sorry for all the photos but I wanted to provide as much detail as possible.
Appreciate any help. Thank you.
Fight breaks out, Austin 6th St
They are doing this mosh pit all wrong
Pool pump won’t turn on
Hello All,
Hoping someone can help and provide some guidance. I have a single speed Hayward pump attached to a wireless ECO timer box. Sometimes I just run it manually by pressing the on button.
I went to go press the on button heard the pump turn over once and everything shut down. No light appears on the ECO timer. I used the little pin reset as well and no clicking or feedback of any kind.
I flipped the breakers off and on in the garage but they never tripped and I checked the sub panel outside since it’s all hardwired and that didn’t help. Lastly I reset all the nearby GFIs and the lights in the corner of the plug is on. I have not removed the door of the eco timer to see power is flowing to it.
Am I missing any steps. The pump does not smell no burning smell or smell of any kind so I don’t think it’s the pump or anything stuck in the impeller, but I’ll check that as well. I’m thinking that the echo timer went bad maybe got fried inside. If there’s anything that any of you could think of, I would truly appreciate it as always thanks.
Pump is not turning on
Hello All,
Hoping someone can help and provide some guidance. I have a single speed Hayward pump attached to a wireless ECO timer box. Sometimes I just run it manually by pressing the on button.
I went to go press the on button heard the pump turn over once and everything shut down. No light appears on the ECO timer. I used the little pin reset as well and no clicking or feedback of any kind.
I flipped the breakers off and on in the garage but they never tripped and I checked the sub panel outside since it’s all hardwired and that didn’t help. Lastly I reset all the nearby GFIs and the lights in the corner of the plug is on. I have not removed the door of the eco timer to see power is flowing to it.
Am I missing any steps. The pump does not smell no burning smell or smell of any kind so I don’t think it’s the pump or anything stuck in the impeller, but I’ll check that as well. I’m thinking that the echo timer went bad maybe got fried inside. If there’s anything that any of you could think of, I would truly appreciate it as always thanks.
This is going to take a while
Sawdust was more flammable than expected
Bit of Miscommunication, I had wanted him to throw the shovel full up into the air and I'd try to ignite it in the sky with my handful.