u/Glum-Contribution380

So, I have this weird issue with my Xbox 360. Basically, some of my disks work.

The weird thing is after like 30 minutes to an hour, those same disks no longer work. Also, some of the disks that worked before still worked.

Basically, disks work. Console gets warm. Some disks no longer work.

Edit: I’ve replaced the disk laser before

Disclaimer: This is NOT Illegal (this would never be able to fire a real round).

So, I do WW2 airsoft stuff. I want a GBBR M1 Garand. problem is all GBBR M1 Garands are either out of stock, discontinued, or really expensive. So, problem solved, make my own. Problem is, I don't want my gas system to be very complicated like normal GBBRs.

So, what I was thinking was basically my thought was to take a 40mm grenade shell and miniaturizing it into a modified 30-06 STL file. I know this sounds crazy, but my other idea was to make the gas housed in a modified STL of a M1 Garand Bolt.

I have everything else planned out (except for the hopup). So, it will use a real M1 Garand parts (stock and handguard, and gas front end), a custom designed receiver and outer barrel, a regular inner barrel, custom designed (off of Marushan design) trigger group and follower spring.

I am planning on getting a metal 3D printer to make these.

So, I have the ideas and basic CAD Knowledge (So, I cannot really do this). Can someone help me with this. I am willing to pay for this if necessary.

Basically miniaturize this into the picture below

Attribution goes to josefg on Thingiverse

https://preview.redd.it/ye2p6cjfi28h1.png?width=1258&format=png&auto=webp&s=b00f799b26f96ea7ac606994fc0dd11a97c9aaed

Basically, I want to get the lettering and design off of it, but I cannot figure out how.

So, I am planning on getting into amateur radio stuff and since I am a history buff, I am wanting to get original WW2/Vietnam radio sets (either working or restoring non working models). I looked it up and I think I would need a technicians license, but would like to aske here just in case. For example, would I need a Level 1 technicians license to use (for reenacting) a SCR 300 or PRC 10 (WW2 and Vietnam era backpack radios)

These are the frequencies these operate on -

for PRC 10: 38.0 to 54.9 MHz VHF 

for SCR 300: 40.0 to 48.0 MHz

For SCR 536: 3.5 and 6.0 MHz

Beyond getting 2 working units, do I need a license to use them?

This would not be a project of building modern ones, but getting original units.

Can I use this to crimp 30-06 into blanks? I missed the opportunity to order from titan reloading (its out of stock now). Can I use these to crimp 30-06 for blank use? The Q&A didn't answer and the Q&A also said that it could do 7.62x54r.
So, what is the answer?

I was looking for a PCR 10 and they have one for a good price, but I can only find one reddit post about it and that was on the iffy side of things.

They have no reviews. They have a Facebook page, but only post links to their website and the posts don't get much traction (if at all).

So, Is it legit?

So, I’m looking to make my own blanks for my M1 Garand. I have a reloading setup already (and the book with all the different calibers, powder loads, and grains, but it doesn’t have blank loads for 30-06).

Is there a resource where I can find the type and load of powder for 30-06 blanks for a M1 Garand?

Also, I’ve tried looking and all that is coming up is loads for actual rounds (not Blanks).

I cannot get my file into a form that has texture mapping in MCreator. I have tried OBJ and MTL. That does not have texture mapping. Save as just auto downloads it as a .bbmodel. I am trying to do it for a java model so bedrock will not work.

Is there something I am missing?

So, I am trying to make the Embermane, The Quillshot, and a few others (all Behemoths). I was going to use the Enderdragon as the base for most of the none flying behemoths. However, Mcreator doesn't allow the option for the Entity model. It only has the Biped, chicken, Cod, cow, Creeper, Ghast, Ocelot, Pig, piglin, Salmon, Silverfish, slime, spider, Villager, and witch. Is there anyway to bypass this? These Behemoths are supposed to be way bigger than the player (ravenger would've been the better choice though).

Embermane

Quillshot

I have the basic shape down

https://preview.redd.it/qxvgqqx02vxg1.png?width=1220&format=png&auto=webp&s=7b5f56518f07a92b6cef0e5222c66456cb5be617

Basically, I am planning on making my own bayonet for my M1 carbine (Blade will be printed from TPU). How do I get the blade like that in the picture? I am using Fusion 360.

I have tried using the fillet tool, but it isn't giving me the results I want and without a top down view of the blade, I cannot use the ol draw on a new sketch and cut.