u/Larix-24

Fire and Ice loop on southern WA

https://ridewithgps.com/routes/50811741

Hi everyone, I’m curious if anyone had any hacks or ways to fix this issue? I have it shown in the yellow circle

In an ideal world I would try and get this fixed by Nicks. But these are my work/fire boots and I can’t afford the lead time right now.

I have leather insoles that help but it’s starting put some not so fun pressure on the bottom of my foot.

Thanks!

4x5, Chamonix 45n-2, D76 1:1

I’m stumped

This is expired TriX 320 developed in D76 used a Cokin Green filter. The second photo of the plane is the same film developed with the other negative in a Stearman press together. Based on the image of the plane I don’t think it’s something from development.

My Stearman works just fine, but I do like the idea of this closure systems.

Negatives don’t seem fully developed.

I’m not sure if my bleach or fix is dying? I’ve been using both of them for a quite a while. Last roll I put through this chemistry everything looked fine.

Yes I’m aware CD-3 is used for ECN-2 development. This roll was exposed at EV100

Process was
Dev for 3:15 min at 106°f agitation for 5 seconds every 30 seconds

Bleach and fix were done for 4:30 minutes following the same agitation as above

Washed with ilfords method and then photo flow with distilled water to dry

And now must seek validation from the internet. Hopefully I won’t have to buy color film for a while. Stoked to try the AHU version. Now I won’t have to deal with RemJet

Used a red filter for all except that macro shot. Dev in 510 Pyro scanned with Epson V700. I feel like these are fine…

I find the more I shoot 4x5 the less interested I am in medium format. If I am going to take the time to lug everything around and meticulously set everything up I’d rather have a bigger negative or on the flip side just shoot 35mm for quicker shots and a lighter camera (plus bulk rolling)

Any how, this is the east side of Mt Hood, and I’m shooting FP4 with a red filter. Will be developing this evening or tomorrow

Self developed and scanned. No light meter used.

I recently found out I can make developer for ECN-2 film. Which got me thinking why can’t I do that for black and white. I recently finished my B&W developer and looked it how to make it. Turns out the raw materials are only slightly more expensive then buying pre made developer and the amount film I can develop is exponentially higher. I have stuff here to make some d76 and Mytol (instant Xtol clone) also not all chemistry is shown here. I think this is the way to shoot film the most economical way especially combined with bulk rolling.

I usually don’t do portraits, but I like how this one came out

Chamonix 45N-2
210mm F/5.6
Developed in 510 Pyro
Scanned with Epson V700

Shot with a Pentax 67 and home developed and scanned

Pentax 67 developed in HC 110

Leica M4, Zeiss F/2 50mm

50% pavement 40% gravel and the last 10% shown above. The ride climbs about 5000ft and the last 1200ft looks like this?

I have a gravel bike (Crust Bombora) and a mountain bike (Transition Sentinel) but I feel like none of them would do well on this kind of ride.

I know the Crust really struggles (or maybe it’s just me) on this stuff