My thermostat seems to have exited hold and entered "Home" mode.
Since there is no way remove/delete this, how do I set it back to permanent hold? I can not seem to find the option in the app.
I know there is an issue with any airflow near the ecobee causing inaccurate temperatures.
I ordered both the Premium and enhanced and my though process is the enhanced is a little simpler and with the plastic casing might be more accurate.
Of course I disabled all the eco settings (why is the default schedule 79 degrees cool for sleeping!!??)
Setpoint: 75
Current temperature: 79
No equipment running
edit: pics for proof https://imgur.com/a/Ll07tNu
Not too long ago I replied to a post saying hey you can try a product such as: amazon link or: aliexpress Us link.
A short while after I got a message saying my post was deleted for violating sidewide rules.
Anyone know what the deal is with that?
We have a rotting utility pole that was "replaced" by the power company.
The old pole is still there pending Comcast move their lines to the new pole.
I called in, only way I could, to the business department and told them there is a downed wire. But I know they aren't going to do anything.
How do I get this escalated? The power company said they notified Comcast but they admit how useless Comcast is. Until these lines are moved the rotting pole can not be removed and as time goes on it poses a greater and greater property risk.
Something in Quicken was renaming the transactions so they don't have the last 4 digits of the account number and other junk in front of it.
If I knew exactly what that was I wouldn't be asking.
The problem is that somehow the settings toggled themselves and Navy Federal accounts began to show downloaded transactions like 4321-Merchant where 4321 is the last 4 digits of the card number.
Some of the options, I am sorry I do not recall exactly which ones, in the "Data Entry & Quickfill" Preferences Pane became unchecked. I went in and enabled them and they sit today as shown in the screenshot.
After this adjustment the Navy Federal downloaded transactions began, again, to show the payee name what I would call "correctly"
However since then the behavior has reverted and Navy Federal transactions once again are showing the last 4 digits of the card number.
Another example is that this monthly recurring transaction through Wells Fargo download with the name "DirecTV" and this month it shows as "SPI*DirecTv Service 800-531-5000 / CA"
I don't even know what's best practice any more. I kind of would prefer it to keep the City/Location, phone number, etc (ideally in the memo field.. but then memorized payee does not work because memo would change, memo should not be memorized)
But mostly Quicken has cleaned up the names, not sure why all of a sudden it's not longer cleaning up the names.
This is what I am seeing: https://imgur.com/knJvai1
Also you can see some of the memos XX2009 and XX5006. Those are card numbers downloaded from Amex transactions. I do not want the memo memorized like that, but I do like to keep as much info downloaded from the banks as possible such as store locations.
Buddy is remodeling his house and AT&T had simply poked a hole through the wall and installed gateway in a bedroom.
Instead of risking $150 for the tech to say sorry, can't do, we moved it ourself with a $12 Amazon 50ft fiber through the crawl space between the AT&T slack NID (which we also relocated) and reused fiber jack.
Surprisingly the signal level actually went up a hair after all is said and done.
We still need to tidy up a few things as it's an active construction site.
Pic for reference: https://imgur.com/a/jlfdW6V
I don't know what's happened recently but now when I download transactions Payee names don't appear the same as before.
A lot of my settings under Data Entry and Quickfill seem to have reset (become disabled) and I enabled them.
However for example my Navy Federal credit card accounts download as 1234 - Chipotle where 1234 is the last 4 digits of the card number.
Another example is that this monthly recurring transaction would download with the name "DirecTV" and this month it shows as "SPI*DirecTv Service 800-531-5000 / CA"
I don't even know what's best practice any more. I kind of would prefer it to keep the City/Location, phone number, etc (ideally in the memo field.. but then memorized payee does not work because memo would change, memo should not be memorized)
But mostly Quicken has cleaned up the names, not sure why all of a sudden it's not longer cleaning up the names.
I will arrive to Port of Incheon and fly out about 12 hours later from ICN airport, and wouldn't mind finding something interesting to do in the meantime.
The issue is what can I do with my luggage without having to drag it around with me. Is there a service that will transfer luggage from the port to the airport?
I have the ESP02 based controller. 16.0.0 would not upgrade due to "Not Enough Space" which I was patiently following but no solution was found: https://www.reddit.com/r/WLED/comments/1t4vvhf/athom_016_not_enough_space/
Just tried 16.0.1 and same thing.
Should I try the ESP02 "min" release? I don't see documented what this is supposed to be.
I genuinely don’t know how people get their license just completely plows into me as I’m driving regularly straight, it’s a total loss. Yes it’s just 328 but fuck man this thing was my absolute baby for years and is my first car did everything to it
:( absolutely heart broken and devastated
I've been struggling with this device for a while. Does anyone have an idea what's going on and how to get it to properly pair?
2026-06-30 15:36:40.356 DEBUG MdnsAdvertisement Broadcast kind: operational service: mdns:6CA53F524F4442F3-000000000001B669._matter._tcp.local number: 578 next: 1m 30s
2026-06-30 15:36:57.771 INFO WebSocketC~erHandler [3] WebSocket connection established
2026-06-30 15:36:57.773 DEBUG WebSocketC~erHandler [3] Sending server info
2026-06-30 15:36:57.779 DEBUG WebSocketC~erHandler [3] WebSocket request {"message_id":"499065763","command":"start_listening","args":{}}
2026-06-30 15:36:57.782 INFO WebSocketC~erHandler WebSocket server start_listening
2026-06-30 15:36:57.782 INFO WebSocketC~erHandler WebSocket server start_listening. Returned 0 nodes
2026-06-30 15:36:57.782 DEBUG WebSocketC~erHandler [3] WebSocket response (start_listening) 499065763
2026-06-30 15:37:00.019 DEBUG WebSocketC~erHandler [3] WebSocket request {"message_id":"499065764","command":"get_loglevel","args":{}}
2026-06-30 15:37:00.042 DEBUG WebSocketC~erHandler [3] WebSocket response (get_loglevel) 499065764 { console_loglevel: "debug", file_loglevel: null }
2026-06-30 15:37:10.606 DEBUG WebSocketC~erHandler [3] WebSocket request {"message_id":"499065765","command":"set_wifi_credentials","args":{"ssid":"SSID_REDACTED","credentials":"WPA_KEY_REDACTED"}}
2026-06-30 15:37:10.606 INFO ConfigStorage Set config key wifiSsid to SSID_REDACTED
2026-06-30 15:37:10.616 INFO ConfigStorage Set config key wifiCredentials to <redacted>
2026-06-30 15:37:10.620 INFO WebSocketC~erHandler Broadcasting server_info_updated event { fabric_id: 2, compressed_fabric_id: 7828733150003217139, fabric_index: 1, schema_version: 11, min_supported_schema_version: 11, sdk_version: "matter-server/1.1.2 (matter.js/0.17.4-alpha.0-20260625-0f2168fd4)", wifi_credentials_set: true, wifi_ssid: "SSID_REDACTED", thread_credentials_set: false, bluetooth_enabled: false, ble_proxy_enabled: false, controller_node_id: 112233 }
2026-06-30 15:37:10.621 DEBUG WebSocketC~erHandler [3] WebSocket response (set_wifi_credentials) 499065765 {}
2026-06-30 15:37:18.110 DEBUG WebSocketC~erHandler [3] WebSocket request {"message_id":"499065766","command":"get_loglevel","args":{}}
2026-06-30 15:37:18.110 DEBUG WebSocketC~erHandler [3] WebSocket response (get_loglevel) 499065766 { console_loglevel: "debug", file_loglevel: null }
2026-06-30 15:37:24.103 INFO WebSocketC~erHandler [3] WebSocket connection closed
2026-06-30 15:38:10.358 DEBUG MdnsAdvertisement Broadcast kind: operational service: mdns:6CA53F524F4442F3-000000000001B669._matter._tcp.local number: 579 next: 1m 30s
2026-06-30 15:39:24.789 DEBUG WebSocketC~erHandler [2] WebSocket request {
"message_id": "65967dbc3da241d696dd9deaa68f7a13",
"command": "commission_with_code",
"args": {
"code": "MT:KUAA0YBV01B68K4YI10",
"network_only": true
}
}
2026-06-30 15:39:24.793 INFO ConfigStorage Set config key nextNodeId to 15
2026-06-30 15:39:24.802 INFO Discovery Initiating discovery of node with discriminator 2425
2026-06-30 15:39:24.832 INFO CommissioningClient Operational address for undefined set to udp://[fe80::d60a:dcff:fe22:8d13%enp6s18]:5540
2026-06-30 15:39:24.833 INFO Endpoint server-2-134b.peer1 ready endpoint#: (unassigned) type: RootNode (0x16) behaviors: 💤parts ✓index ✓commissioning ✓network
2026-06-30 15:39:24.840 INFO Controller~missioner Establish PASE to device DT: 769 PH: 36 ICD: 0 VP: 5004+13825 PI:
2026-06-30 15:39:24.845 DEBUG MessageExchange New exchange » •unsecured#b33456a429f28624⇵b2c3 protocol: 0 peerSess: 0000 SAT: 4s SAI: 300ms SII: 500ms maxTrans: 5 MRP I
2026-06-30 15:39:24.852 DEBUG MessageChannel Message » for: SC/PbkdfParamRequest backOff: 636ms id: •unsecured#b33456a429f28624⇵b2c3✉0ac36e95 type: 0x0/0x20 reqAck size: 79 payload: 1530012065188dbbe53f3f0455ea90e8d6fd3d10fca6d5f16d05e0b5bb6be359784c7f962502ec59240300280435052501f40125022c012503a00f24041324050c26060001050124070a2408061818
2026-06-30 15:39:25.491 DEBUG MessageChannel Message » for: SC/PbkdfParamRequest retrans#: 1 backoff: 617ms id: •unsecured#b33456a429f28624⇵b2c3✉0ac36e95 type: 0x0/0x20 reqAck size: 79 payload: 1530012065188dbbe53f3f0455ea90e8d6fd3d10fca6d5f16d05e0b5bb6be359784c7f962502ec59240300280435052501f40125022c012503a00f24041324050c26060001050124070a2408061818
2026-06-30 15:39:26.109 DEBUG MessageChannel Message » for: SC/PbkdfParamRequest retrans#: 2 backoff: 1.05s id: •unsecured#b33456a429f28624⇵b2c3✉0ac36e95 type: 0x0/0x20 reqAck size: 79 payload: 1530012065188dbbe53f3f0455ea90e8d6fd3d10fca6d5f16d05e0b5bb6be359784c7f962502ec59240300280435052501f40125022c012503a00f24041324050c26060001050124070a2408061818
2026-06-30 15:39:27.161 DEBUG MessageChannel Message » for: SC/PbkdfParamRequest retrans#: 3 backoff: 1.49s id: •unsecured#b33456a429f28624⇵b2c3✉0ac36e95 type: 0x0/0x20 reqAck size: 79 payload: 1530012065188dbbe53f3f0455ea90e8d6fd3d10fca6d5f16d05e0b5bb6be359784c7f962502ec59240300280435052501f40125022c012503a00f24041324050c26060001050124070a2408061818
2026-06-30 15:39:28.648 DEBUG MessageChannel Message » for: SC/PbkdfParamRequest retrans#: 4 backoff: 2.79s id: •unsecured#b33456a429f28624⇵b2c3✉0ac36e95 type: 0x0/0x20 reqAck size: 79 payload: 1530012065188dbbe53f3f0455ea90e8d6fd3d10fca6d5f16d05e0b5bb6be359784c7f962502ec59240300280435052501f40125022c012503a00f24041324050c26060001050124070a2408061818
2026-06-30 15:39:31.440 DEBUG MessageExchange Message •unsecured#b33456a429f28624⇵b2c3✉0ac36e95: Wait additional 8.44s for processing time and peer resubmissions after all our resubmissions
2026-06-30 15:39:39.885 INFO Session •unsecured#b33456a429f28624 Session ended
2026-06-30 15:39:39.886 WARN Commission~onnection Address udp://[fe80::d60a:dcff:fe22:8d13%enp6s18]:5540 unreachable for known-address-0-udp://[fe80::d60a:dcff:fe22:8d13%enp6s18]:5540
2026-06-30 15:39:39.888 DEBUG ParallelPa~Discovery Failed parallel commissioning attempt: [peer-communication] Could not connect to device
2026-06-30 15:39:40.360 DEBUG MdnsAdvertisement Broadcast kind: operational service: mdns:6CA53F524F4442F3-000000000001B669._matter._tcp.local number: 580 next: 1m 30s
2026-06-30 15:41:10.364 DEBUG MdnsAdvertisement Broadcast kind: operational service: mdns:6CA53F524F4442F3-000000000001B669._matter._tcp.local number: 581 next: 1m 30s
2026-06-30 15:42:24.833 ERROR WebSocketC~erHandler [2] WebSocket error response (commission_with_code) 65967dbc3da241d696dd9deaa68f7a13 Commission failed: discovery of node with discriminator 2425 failed: No device could be commissioned (1 of 1 started attempt(s) failed, 1 discovered)
at ServerError.nodeCommissionFailed (/app/node_modules/@matter-server/ws-controller/src/types/WebSocketMessageTypes.ts:100:16)
at ControllerCommandHandler.commissionNode (/app/node_modules/@matter-server/ws-controller/src/controller/ControllerCommandHandler.ts:969:31)
at async WebSocketControllerHandler.#commissionWithRetry (/app/node_modules/@matter-server/ws-controller/src/server/WebSocketControllerHandler.ts:697:47)
at async WebSocketControllerHandler.#handleCommissionWithCode (/app/node_modules/@matter-server/ws-controller/src/server/WebSocketControllerHandler.ts:741:24)
at async WebSocketControllerHandler.#handleWebSocketRequest (/app/node_modules/@matter-server/ws-controller/src/server/WebSocketControllerHandler.ts:485:30)
Caused by: [discovery-aggregate] discovery of node with discriminator 2425 failed: No device could be commissioned (1 of 1 started attempt(s) failed, 1 discovered)
at CommissioningDiscovery.onComplete (/app/node_modules/@matter/node/src/behavior/system/controller/discovery/ParallelPaseDiscovery.ts:180:23)
Cause #0: [peer-communication] Could not connect to device
at ControllerCommissioner.#establishPaseFromCandidates (/app/node_modules/@matter/protocol/src/peer/ControllerCommissioner.ts:322:23)
at async ControllerCommissioner.commission (/app/node_modules/@matter/protocol/src/peer/ControllerCommissioner.ts:232:29)
at async CommissioningClient.commission (/app/node_modules/@matter/node/src/behavior/system/commissioning/CommissioningClient.ts:275:52)
at async Peers.runCommissioning (/app/node_modules/@matter/node/src/node/client/Peers.ts:365:20)
2026-06-30 15:42:40.366 DEBUG MdnsAdvertisement Broadcast kind: operational service: mdns:6CA53F524F4442F3-000000000001B669._matter._tcp.local number: 582 next: 1m 30s
I had already 2x EAP245v3 working fine. I added 1x EAP775-Wall to an area with poor coverage and now my laptop wants to latch on to the weak signal from the EAP775 even when I am a few feet from the EAP245.
6ghz band for some reason doesn't want to work in the EAP775. When I try to upgrade firmware for any of the 3 AP on the controller it fails. It just shows UPGRADING for 5 minutes and then goes back like nothing ever happened, no sort of logs.
Connected on this far off EAP775 it took 5 minutes to try to upload the 30mb firmware file
I have a use case where we would like to lookup data from an external API, display the results, and then have an option to use that data to create a new lead/contact in Hubspot and guide the user to schedule a new meeting.
Is that something that can be accomplished with Hubspot?
In other words display a form, user enters a required data and hits submit, they see the result and are given the option to create new lead and if they were to select that it would pre-populate with some of the data from the API. Once that is submitted they are taken to the schedule meeting screen to complete that process.
Since someone is going to want to know why to spill the beans, I'll give you the long story.
I have a BGW320 in IP passthrough mode. About 2 months ago I stopped getting internet on an old ASUS router. I could remote into the ASUS router (when a PC was on a hotspot), configure a static WAN IP in the 192.168.1.x range and get back online.
I replaced the ASUS with an OpnSense router, configured IP passthrough and the same thing happened. I had to factory reset the BGW320 and re-configure passthrough to get back online without double NAT.
Now, 2 months later, the same thing his happening. I have not been on site to attempt a factory reset. Also during troubleshooting I could not get online with a spoofed WAN MAC address on the OpnSense router in an attempt to bypass IP Passthrough.
Therefore, what is the simplest way to get AT&T to send out a replacement BGW320? It seems to be the faulty piece in the equation.