u/initial8155

Happy July 4th to all from the US!

Hoping to get some advice with what’s going on with my driver’s door not locking from the door control, and a tip to pairing a new remote at the end. Before going into the details, this was not caused from pairing the new remote. This was already happening before the new remote was paired.

The video shows exactly what the situation is. The old and new fobs have no issue locking and unlocking the doors, including the driver’s door. However, the door panel control has no trouble unlocking all the doors but will only lock all the doors EXCEPT the driver’s door! Manually pushing the driver’s door lock plunger will lock all the other doors as well. Why won’t the switch lock the driver’s door? The driver’s window doesn’t actuate either but I don’t think it’s related, is it?

Tip for pairing a new remote: don’t miss a beat.

So apparently, there are three versions. There’s the early R34, the late R34, and the late late R34. Mine is late late. When entering into pairing mode, the hazards don’t flash but the doors unlock instead to confirm successful pairing mode activation. Then, AT THE EXACT PACE of inserting and removing the key from the ignition, insert the key, switch to ACC, manually lock the driver’s door by pushing the plunger in, and press the Lock button on the new remote WITHOUT SKIPPING A BEAT. I got so frustrated in the initial attempts. I thought the new remote was faulty or the battery was dead or the car’s memory bank was full. But no, apparently taking 2-3 seconds between a step is considered too long for the system.

Be safe with grilling and playing with fireworks!

https://store.steampowered.com/sub/575626/

Enjoy.

Enjoy.

Music. Sweet music.

V-Spec II

V-Spec II

Made by James Bruton

https://www.yankodesign.com/2025/01/30/james-brutons-omni-directional-ball-wheeled-bike-re-inventing-mobility-with-spherical-wheels/