u/Aguel_design

Here is my latest Montech build.

It's for my client, so modifications are very limited but it still look good with those wooden panels.

I build it by using my own parts, so I can take better pics. There is Montech LightFlow 360 AIO with walnut coverplate and Montech E28 fans.

I just found this gem for my collection 😍

First fanless Seasonic model from yer 2010.

It's still like new and fully working 👌🏻

My first custom loop project is ready 😍

Collaboration with Gigabyte and Alphacool

It turned out pretty nicely, especially considering it was my first time trying this kind of thing 👌🏻

It’s not perfect and there’s definitely room for improvement but I knew that at the beginning, since I chose the hard way right from the start: using hard tubing, no angled fittings, no dedicated pump mount, mATX case (Phanteks XT V3), and dual 360mm radiators.

All the tubes were measured by eye and bent freehand 😅

The visible side looks really clean regarding the wiring, thanks to that Aorus Stealth motherboard, though I still had to tuck away a few cables since every block has ARGB LEDs and DDCzero pump in the reservoir.

Collaboration project with FSP and Gigabyte

I set the lighting colors to match the "ambient lighting" found on the Gigabyte Aero Dark Wood motherboard.

The only custom part is a small cover plate on the motherboard surrounding the 24-pin connector, designed to hide the numeric display and other not so good looking parts.

Case: FSP U580

AIO: FSP AD36

Rear fan: FSP ZENFAN

Power supply: FSP Mega GM 1000W

Mobo: Gigabyte Aero X870E Dark wood

Here is my "zen" setup in my workshops office room and also my Noctua collection in that same room 😁

There is real walnut and stone in that wall and I also made those shelves by using that same walnut wood.

Monitor cables go inside wall, so it look like flowing 😁

My first custom loop project is ready 😍

Collaboration with Gigabyte and Alphacool

It turned out pretty nicely, especially considering it was my first time trying this kind of thing 👌🏻

It’s not perfect and there’s definitely room for improvement but I knew that at the beginning, since I chose the hard way right from the start: using hard tubing, no angled fittings, no dedicated pump mount, mATX case, and dual 360mm radiators.

All the tubes were measured by eye and bent freehand 😅

The visible side looks really clean regarding the wiring, thanks to that Aorus Stealth motherboard, though I still had to tuck away a few cables since every block has ARGB LEDs and DDCzero pump in the reservoir.

GPU is Intel ARC B580 Asrock Challenger

My first custom loop project is ready 😍

Collaboration with Gigabyte and Alphacool

It turned out pretty nicely, especially considering it was my first time trying this kind of thing 👌🏻

It’s not perfect and there’s definitely room for improvement but I knew that at the beginning, since I chose the hard way right from the start: using hard tubing, no angled fittings, no dedicated pump mount, mATX case, and dual 360mm radiators.

All the tubes were measured by eye and bent freehand 😅

The visible side looks really clean regarding the wiring, thanks to that B850M Aorus Stealth motherboard, though I still had to tuck away a few cables since every block has ARGB LEDs and DDCzero pump in the reservoir.

My first custom loop project is ready 😍

Collaboration with Gigabyte and Alphacool

It turned out pretty nicely, especially considering it was my first time trying this kind of thing 👌🏻

It’s not perfect and there’s definitely room for improvement but I knew that at the beginning, since I chose the hard way right from the start: using hard tubing, no angled fittings, no dedicated pump mount, mATX case, and dual 360mm radiators.

All the tubes were measured by eye and bent freehand 😅

The visible side looks really clean regarding the wiring, thanks to that Aorus Stealth motherboard, though I still had to tuck away a few cables since every block has ARGB LEDs and DDCzero pump in the reservoir.

My first custom loop project is ready 😍

Collaboration with Gigabyte and Alphacool

It turned out pretty nicely, especially considering it was my first time trying this kind of thing 👌🏻

It’s not perfect and there’s definitely room for improvement but I knew that at the beginning, since I chose the hard way right from the start: using hard tubing, no angled fittings, no dedicated pump mount, mATX case, and dual 360mm radiators.

All the tubes were measured by eye and bent freehand 😅

The visible side looks really clean regarding the wiring, thanks to that Aorus Stealth motherboard, though I still had to tuck away a few cables since every block has ARGB LEDs and DDCzero pump in the reservoir.

Gold/black themed build 😁

Montech King 45 case, Alphacool gold fans, Asus ProArt motherboard with marble patterned cover plates, ProArt 360AIO, black leather cover plates inside the case and Seasonic Prime Gold PSU👌🏻

Gold/black themed build 😁

Montech King 45 case, Alphacool gold fans, Asus ProArt motherboard with marble patterned cover plates, ProArt 360AIO, black leather cover plates inside the case and Seasonic Prime Gold PSU👌🏻

Gold/black themed build 😁

Montech King 45 case, Alphacool gold fans, Asus ProArt motherboard with marble patterned cover plates, ProArt 360AIO, black leather cover plates inside the case and Seasonic Prime Gold power supply 👌🏻

I just got Gigabyte B850M Aorus Stealth but it doesn't fit in XT V3 case without cutting. Other manufactors with btf support does have open corner in their case.

There is same problem in other Phanteks case too.

I just got these beautiful mobos today 😍

Can't wait to finish my builds with these.

I just receive this "starter pack" from Alphacool 😍 Soon it's time to build my first custom loop 😁

All 120mm Noctua fan models in beige/brown color.

Oldest is from 2006.

So what do you think about this idea of integrated support in front grill in 9060XT Sapphire Nitro+

It's still test piece but works well 👌🏻

Ps. don't mind that motherboard

Little bit leather and beautiful cables from Cablemod and Noctua themed back side is perfect 👌🏻

The story of this project is not very long but I'll share it anyway.

I'm constantly looking for new and interesting projects.

When I saw this Sky 3 case I knew right away that it had the potential for a spectacular build.

Walnut wood combined with a black case is my personal favorite and since I had some dark walnut plywood and black fans in stock I decided to start building my first collaborative project with Montech. In this project I got to combine my carpentry skills and my photography hobby.

The side fan mounts had to be cut out and rebuilt so that I could make them stay neatly behind the cover plate.

The other plates were reasonably easy to make but they also required precise measuring and sawing.

I also painted the grille at the bottom of the case brown so that it fits well with the whole.

The end result is very stylish and elegant with a suitably minimalistic argb led strip.

I've posted pictures of this here before but here it is again with a little story 😊

When lot of people was crying that Noctua didn't release Chromax.black version of their AIO, no one remember their nice Redux series, so as a partly of joke this build was born as a collab with Noctua.

Lian Li O11 Vision-M with leather covered custom panels, including 9,2" screen panel with centered screen, NL-LC1-24 AIO with custom mounting to right side of the case and 10x NF-P12 Redux fan.

Powered by Seasonic Prime Titanium with grey fan cover.