u/AvidasMavi

That's the reason you feel like you can't win any games.

If you are like me who plays 1 or 2 games max a day, and waiting 20 min in a que, almost always joining the losing team.

Because people spam !switch or manually try to switch to the winning team and you fill up the space the created in the losing team.

And there are only few servers that does rebalances the teams.

Unlucky.

After installing the update and PC restarted I reverted all my memory timings (which was written on a piece pf paper, I only change around 10 values anyway), launched a game and system immidiately blue screened.

I was like, wtf. Then run memtest 5 and found dozens of errors first 5 seconds and blue screen again.

I said to myself, here we go again... Reverted everything to default and only set memory mhz to 6000. When done that usually system would adjust primary timings to 38 38 38 etc, etc, but now it sets them to 46-43-43 and TWR to 96(wtf is this?), trfc to 968(wtf??? no jdec is this high, the most loose and 99,9999999% work change is like 580 why sets to 968???!!!) and other timings to astronomical values.

Every timing sooo much more loose than what was default previously.

WTF is happening. And for the life of me I can't figure out how to properly set up them again.

Is there a way to revert bios update?

I got this motherboard brand new from minisforum 8-9 months ago, and yesterday a problem has started appearing, the blue usb ports on the back and the usb c port are constantly disconnecting. One of them I have external wifi connected, other one is external SSD, and I lose internet connection all the time, and can't use the external SATA SSD neither.

I tried to disconnect and route psu cables better, I don't think any short circuit etc happening. PSU is lian li SFX 1000W also purchased around the same time, system is using 400-500W in best case scenario.

The black USB 2 ports are fine, there is keyboard and mouse is connected, no issues. But all the other USB ports are going crazy, including the case USB ports connected to USB header.

Is this windows issue? If so how come it can start just out of nowhere with no changes are done?

I already send message to official support, can you please help me if you had gone through the same problem?

Thanks.

Is it hard to do so? How come it's present in many games? Both in cryengine and unreal engine...

https://s6.ezgif.com/tmp/ezgif-666def50e16e66a4.gif

I have a weird problem going on, on windows with Kioxia SATA SSD 2TB which I use for 2 years.

On linux everything was fine, never noticed anything but as soon as I started using windows recently, almost every game running on SATA SSD has weird bugs on textures, like they are loading 144p instead of high resolution. Moving game to the NVME SSD solves this problem 100%.

These games can even run on HDD, such as RDR2, Witcher 3 etc, so SATA SSD should be more than enough(besides it runs fine on linux)

Things I have tried

1. Crystaldiskinfo shows 100% health, no errors pristine condition.
2. It's already set on performance mode under windows, and caching is enabled.
3. It can't be GPU or hardware related, like I said problem does not exist once game runs on NVME SSD.
4. Updated SSD firmware from kioxia.
5. Storage is only 30% filled up. Around 550GB out of 2TB.

What could be the problem and how can I solve this? I bought this drive mainly for gaming/storage and I know problem is windows related for sure.

Thanks.

It doesn't matter what you play, high roller stats will always outperform any augment.

I tried on Vayne and had 400 armor 350 magic resist, 30% omnivamp late game, although fan the hammer is better but I 1v9 that game from stats alone.

Same with mages, you can get 200+ ability haste from stats alone.

Do you agree?

Cant find any solution to fix it, thoughts?

Lagging like crazy man. Did reinstall drivers, turned off overlays and stuff, reinstalled the game cleared the cache etc. No solution yet.

So I have sony something something home theater for TV and I connected it via bluetooth on PC.

For the life of me I can't figure out how to stop this speakers turning itself off after 5 mins of inactivity. I'm kinda exhausted to turn it on non stop via remote.

There is nothing on remote that says about it.

I turned on and off all the bluetooth related stuff like power saving etc, nothing works.

Now, I know that bluetooth is able to turn it on. When I boot the PC, the bluetooth wakes up the speakers. This means it is able to communicate with the PC somehow.

Any idea how to fix this issue?

Thanks.

Just curious how other redditors set up the settings.

I can run Witcher 3 DX 11 either at high settings locked to 30fps or low/steam deck preset locked to 45 fps.

How do you set up?

Last time I played the game it was a long time ago. Probably during covid. Few days ago I continued the playtrough, somwhere in the middle of the story.

Man it was such a blast. I didn't remember what was the previous conversations, although remembered few things like there was a corpse and we are solving a crime.

The first NPC I talked to was the drunkard calling me teuqilla man, and harry's answer was he doesn't remember shit what happened. Yeah, so am I.

I didn't feel lost, or anxious, or didn't even felt the need to restart the game.

Wow.

HARDCORE TO THE MEGA.