u/GreenPanadol11

Saw marvel rivals post this artwork, i need this hela skin like asap

We got one chance, idgaf what your financial situation is, if you gotta take outa loan take it out, if you gotta max out that card, max it tf out. IF YOU GOTTA SHAKE SOME AHH FOR A $20 THEN MF YOU BETTER DO IT

WE, yes you AND me, WILL BE PURCHASING THAT STORM BUNDLE

Ive never read a novel so horrible in my life, yet I find myself turning page after page. Seniors it seems I’m straying from the righteous path.

Hey yall, just wanna know for those with a similar build to mines, what are your results for CS2 benchmarks, specifically the P1s

This is as high as im able to go with this current RAM OC

Hey guys, I was benchmarking cpu performance using 7zip benchmark. The first image is a few months ago and the second is today, the only changes between the two images is roughly 2 bios updates, no obvious background apps running for both instances and temps were consistent. Why am i getting such low decompression but slightly higher compression?

Hey guys, I was benchmarking cpu performance using 7zip benchmark. The first image is a few months ago and the second is today, the only changes between the two images is 2 bios updates, no obvious background apps running for both instances and temps were consistent. Why am i getting such low decompression but slightly higher compression?

Over the past week or two, i've done nothing but benchmark, stress test, or clear CMOS. Over and over and over.

I managed to get this 6400cl30 profile stable enough, but I realized something....i'm playing in 1440p on a 9070xt...Am I REALLY gonna see any difference between these two profiles? My GPU isn't gonna be able to push my CPU that far into giving me any meanigful results, at least I don't think so, and 6400cl30 is basically 6000cl28 *with more heat*

I'm at a point now where i know that if am to see any meaningful results from memory OC on this chip, i'll need to feed more voltage to both my CPU's IMC and RAM, but will it even make that much of a difference?

Just want some advice on what is the most IDEAL profile for a 9800/9850x3d,, when it comes to performance/efficiency or am I beating a dead horse?

25M, how long do i got doc

After further tweaking, i increased vddio and vddq to 1.38v and decreased vdd to 1.47v and i found some stability, i was able to pass ryzen3d for 2hrs without errors

I then went on to lower vddq and vddio to 1.34v, which i passed for another 2hrs. So i thought the issue must have been with VDD being too high originally.

However this morning when i tried to run tests again i kept failing (image 3-5)

So now im at a point where im not sure why im passing but failing with the same settings other times.

I tried running P95 large FFTs but i have no problem there.

Been running numerous values for the past couple days however i continue to get either Test 4 errors in Ryzen3d cnfg (i managed to get a test 2 errror once in 3d cnfg) or Test 4 and Test 15 errors in 1usmus config. (Note: these errors only appear 1hr+ into the test, and temps remain below 44c. Also, the errors happen no matter TRFC)

My next guess is RTT values but i'm not sure how to approach that.

My VDDP and SoC values seemed well since I had rock stable values in VT3 for 7+hours (see previous post) so i assumed IMC was stable. From what I understand Test 4, Test 2 (ryzen3d) errors are RAM side errors? and Test 4 and Test 15 (1USMUS) should be RAM side errors as well?

Any help is appreciated

I think i'm almost done locking in my new daily. I just need to run TM5 and Karhu overnight. If i do get any error's i'm betting on it being due to low VDD but we'll see. If you see anything standing out please let me know

My current settings passes 1usmus for up to 11+ hours but after 5 hours of ryzen 3d config i get an error in test 5

I understand these two configs would not have the same test errors (ryzen3d doesnt even have a public error sheet as far as i know)

Any ideas on what this could be?

keep getting crash handler reports on Apex legends. when analyze the packerfile using winDbg, i keep getting either illegal instruction or gaurd page violation

Any ideas on what these crashes could be?

SPECS:

CPU: 9850X3d

GPU: 9070XT (on latest drivers)

Motherboard: b650 aorus elite ax 1.2 (on latest bios)

ram: 2x16gb (32gb) 6000mt/s