I am throwing a lot of bottles and bricks at enemies, definitely did more than 5 and it doesn't count, each map completed, nothing adds up, what am I doing wrong?
I know it most likely will never happen to any of us but big what if, you're miscalculated distance and there is no charger in sight, battery is empty, what EV driver can do in situation like that?
3 months ago I posted a question here, asking if I made mistake, because I thought I am treble sensitive princess, and maybe I am, I am not sure, I like treble but not sibilant sound. At first, I hated that sibilant sound in PRX, but nothing that EQ can't fix, right?
Turns out, considering the price, with a bit of EQ, PRX are pretty good, I dare to say great, but I don't want to be accused working for KZ, they didn't send me! (that's what KZ guy would say, I know).
I've tested PRX in online gaming, Battlefield 6 and Apex, great in both games, I was able to locate what I needed, maybe with the right EQ, it could be even improved.
tl;dr
PRX is good, great considering the price, but 3 conditions must be met, tip rolling (they aren't comfort kings IMO), EQ what you need, and most importantly, feed them with power, otherwise they will sound like urban legend about them, trash.
I recommend Black Pearl because that's what I tested and definitely gives enough power & after rolling tips, I've decided to stay with old Tangzu Sonic tips.
After months on "Thread to remote OTBR" and countless crashes, decided to rebuild Thread and switch to OTBR running on device and it works, just wanted to share this if someone is experiencing crashes with their HAOS on Proxmox, this is your solution if you use SLZB-06MU.
What is going on? I never had any warnings, now W11 doesn't want me to unzip the file, should I be worried?
Hey BYD drivers, I wanted to ask you about one feature that makes me hesitate to buy Dolphin Surf, that ADAS face/eyes scanner that loves to spam driver with eyes on the road notifications.
I've heard that this can't be disabled permanently, only before each drive, how are you dealing with this, multiple clicks before each journey or there is something that can be done about it?
TM So we can fix what EA can't, because they are who they are 😒TM
After a while of using Direwolf 4, left stick isn't as smooth as it was before, in FPS games where there is a lot of movement and stick is often in a position as shown on the picture, I feel friction, it's very annoying, especially when right stick doesn't have that at all.
Anyone with similar experience? Is there anything I can do? Or maybe you can recommend similar controller with the best smooth sticks?
Considering Toyota Auris but perhaps there are better choices? Any recommendations are welcome.
Group multidisc albums is marked as experimental, any idea when this will work? This is the only dealbreaker for me.
I am not sure what model is it, I believe something from Nuforce, they are extremely small, if someone needs IEM for side sleeping, this might be it (once someone identity them ofc).
Explorers for scale, no bananas left.
I don't understand why Aful did not protect the nozzles on Explorer but hoping if Explorer 2 ever comes, it will have it then, that's the only issue with these IEMs.
Is Hibymusic app better than Poweramp? I like poweramp interface, can't get used to Hiby app, but I get the feeling music sound better from Hiby, maybe it's just a feeling like the one ppl have with DSD magic 🪄
Lost my charging case, can't find replacement on Amazon, they sell protective cases but I can't see any charging cases, any idea where I can get it?
Thanks for the recommendations, now I am not sure what is better Tangzu Sonic (older ver) or Penon Orange, first impression tells me Orange is winner here. Sound is great and comfort is perfect, seal too.
If there is something bigger/cheaper, let me know, open to any suggestions.
Just curious what's your opinion about these settings.
Ordered Aful Explorer with 4.4 but wondering if it's needed, 3.5 cables are a bit more comfortable, lightweight, at least from my little experience, maybe I just need better balanced cable.
I am using a Beelink S13 with Proxmox and HAOS installed, connected to a TP-Link Deco XE75 router via an unmanaged TP-Link TL-SG1005LP PoE switch. This switch also powers my SMLIGHT SLZB-06MU Thread coordinator.
Currently, the SLZB-06MU is set to "Thread to remote OTBR" mode. It connects to the HAOS OTBR App using a socat TCP connection over the network. I am experiencing frequent TimeoutError crashes in the OTBR logs, which seems to be caused by the unmanaged switch dropping the TCP connection.
Would switching the SMLIGHT radio mode to "Thread+OTBR running on device (experimental)" be a better?
This is log from OTBR app:
[11:35:43] INFO: [32mStarting socat TCP client for OTBR daemon... [0m
[34m Add-on: OpenThread Border Router [0m
[34m Add-on version: 3.0.1 [0m
[34m System: Home Assistant OS 18.0 (amd64 / qemux86-64) [0m
[34m Home Assistant Core: 2026.6.4 [0m
[34m Home Assistant Supervisor: 2026.06.2 [0m
2026-06-20 11:35:44 homeassistant zigpy.serial[252] DEBUG Connection made: <serialx.platforms.serial_linux.LinuxSerialTransport object at 0x7f9a8a168310>
2026-06-20 11:35:46 homeassistant universal_silabs_flasher.spinel[252] DEBUG Device did not respond to reset, continuing
2026-06-20 11:35:52 homeassistant universal_silabs_flasher.spinel[252] DEBUG Failed to send SpinelFrame(header=SpinelHeader(network_link_id=0, flag=2), command_id=<CommandID.PROP_VALUE_GET: 2>, data=b'\x08'), trying again in 0.10s (attempt 3 of 3)
Traceback (most recent call last):
File "/usr/local/lib/python3.13/dist-packages/universal_silabs_flasher/spinel.py", line 260, in send_frame
return await asyncio.shield(future)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
asyncio.exceptions.CancelledError
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/bin/migrate_otbr_settings.py", line 228, in <module>
asyncio.run(main())
File "/usr/local/lib/python3.13/dist-packages/universal_silabs_flasher/spinel.py", line 292, in send_command
return await self.send_frame(frame, **kwargs)
File "/usr/local/lib/python3.13/dist-packages/universal_silabs_flasher/spinel.py", line 259, in send_frame
async with asyncio_timeout(timeout):
File "/usr/lib/python3.13/asyncio/timeouts.py", line 116, in __aexit__
raise TimeoutError from exc_val
TimeoutError
[11:35:52] WARNING: [33motbr-agent exited with code 1 (by signal 0). [0m