My old Cloudflare page rule redirect suddenly stopped working and now throws an ERR_NAME_NOT_RESOLVED error

Page Rule: ://sub.domain.com* -> 302 Redirect to https://external-site.com

//sub.domain.com is an A record pointing to a dummy IP (192.0.2.1), set to Proxied (Orange Cloud).

SSL: Set to Full.

the rule worked fine for years before this, not sure what I changed

Changed the dummy IP to a different one (192.0.2.2) so it doesn't share the exact same IP as the root domain.

root domain is an A record pointing to a dummy IP (192.0.2.1), set to Proxied

Cloudflare AI says it should work and everything else says if it's proxied it should do the rule

I have a 99x150cm mat, square omni, and a 60x30 hitting insert.

Hitting into SPG-7 net, indoors, with walls/benches behind me so I don't have spare space. Longest club I can use is 5W.

the plan is to cut out an area in the mat to put the insert. But how far from the edge should I cut it? I assume I cut the mat along the short edge. this will allow me to stand further back for longer clubs.

https://preview.redd.it/mb85oslmoujh1.png?width=502&format=png&auto=webp&s=78fa93805215a8e1d746307f0319ed7d64765021

I'm not sure if the Omni should be on the mat so it can be at the same level or off the mat so that I've got more space to stand.

I want to use club measurements so I'm really only getting the front half of the zone

https://preview.redd.it/3m2kz9ovoujh1.png?width=483&format=png&auto=webp&s=9f3f39a839af1b39b695efb392f1736170d55eda

should I cut a box out so I can insert the mat or should I just cut a C shape so I am using as much of the Mat as available? since the Launch Monitor will be off the mat anyway

This is a TEMPORARY set up. In other words I set it up in my living room and I take it down when I'm finished.

is there an advantage cutting a slot or should I just put it at the end of my mat?

I'm kind of sick of how every time our LED light blows in the ceiling we have to get an electrician to install a new one.

are there ceiling lights which are like down lights where the user can just replace it and it plugs into a normal socket in the roof cavity?

I have these downstairs:

https://preview.redd.it/7cscjf0io3jh1.png?width=432&format=png&auto=webp&s=3b3c06bbca68ced15d8319de6cc6de48511b3524

and upstairs I have something to give a more even light like this, one in the middle of each room

https://preview.redd.it/w5vepj08o3jh1.png?width=270&format=png&auto=webp&s=4d46b6440a2e72381e0316cb9517e0e40ac9cb93

I really can't afford an electrician each time. I see some options if you have a normal screw socket

https://preview.redd.it/lupuajpco3jh1.png?width=267&format=png&auto=webp&s=cbcf401b12422afe0a94be67b1d775efbf39ce18

but because they are going to stick so far off the ceiling I think it will be a bit weird

is there anything that's like a down light so you can plug it into a normal switch but like an oyster in that it gives a soft even light?

high handicapper in australia, with kids

The only space we have in the house is the living room. (garage has less width, less length)

Got Spornia SPG-7 and Square Golf Omni

left of the net is a wall mounted TV and right of the net is sofa with floor to ceiling glass behind.

When the net is touching the sofa, there's about 50cm gap to the tv cabinet on the left.

This is a setup that I have to take down after my sessions.

https://preview.redd.it/693tgj0zo1jh1.png?width=1233&format=png&auto=webp&s=709b9bcf64a42f30ee13190cedf6cf045e5f893b

I have just enough space to swing my irons before I hit the kitchen bench.

I feel like the TV is safe because it would be very hard for me to hook it so far to go right behind me

the glass does not feel safe since the net does not provide much coverage on that side

Thinking about different ways of doing shanking protection:

Square net

Over the sofa area would be great. But how would I set it up and take it down easily? There are some 3mx3m outdoors nets, with stand, that would be too big for my space. Ceiling is 2.7m.

I could get a net by itself but then how would I stand it up?

Shank board

I found this in another thread

https://preview.redd.it/k38ibrwsq1jh1.png?width=610&format=png&auto=webp&s=699f075103943950984a4e4c342daf61dc2e7963

Great idea but since I use the Omni I need it to be able to see the ball flight from the side?

How much vision does the Omni need? I assume if the SETUP square is 25cm to the right, it tracks that far flight to the left.

If I move the board back to allow that vision, the size would need to be exponentially larger

Any other ideas?

I have a Sony Google TV connected via ethernet to my home network.

I have a Samsung S24 Plus using Wi-Fi. I use the smart view mirror screen in the notifications panel and I can cast my screen to the TV

I have a Samsung A8 tablet using Wi-Fi. it is using the same WI fi as the phone. When I use smart view mirror screen it cannot find the TV but it finds some neighbor TV's

because they are both using WI fi and the TV is connected via ethernet and does not have WI fi turned on, I don't think it is the TV's problem?

Query Identification: 01098172 (INCLUDE THIS IN YOUR POST! THIS IS AUTO-GENERATED FOR YOU!)

Title: Samsung

Description: as above

Things I have tried: reboot, pressing it again and again and again, there are no updates, the battery is completely full

Device Name: Samsung A8

Device Model Number: sm x205

Best regards, u/Seppu477

Australia. 100% opposed to subscriptions. Want shot path on range, not courses.

Newbie & son, hoping to put sth at home living rm. No space for a permanent setup. Getting the Spornia SPG-7 Golf Practice Net for my space. Indoors, so we can play evenings.

I might have had enough space for the MLM2 pro. Maybe. Maybe 5cm short. Not sure. Probably could make it work from the kitchen, slanted.

Eventually saw the Omni. Being side position means guaranteed space available. The idea that I can get club face data seems to put it above the Home. I'm not good enough to know where I hit 'by feel'

Cost:

1. MLM2 pro 900 + lifetime 1000 = 1900AUD
2. Square Golf Home = 1200AUD
3. Square Golf Omni = 2999AUD

I'm ready to pull the plug. Any reason I shouldn't go with the Omni?

https://preview.redd.it/8ykgyl0gmyhh1.png?width=1972&format=png&auto=webp&s=2be733cd503a03734068389efc8f5d9d65efb84b

Wondering if anyone can explain this.

Look at the time scale, it starts May, which is 3mth

https://preview.redd.it/u4pupt0jmyhh1.png?width=247&format=png&auto=webp&s=241f1dfaefba544695ec2d67f1e8b662e1a7c12c

then june is halfway

https://preview.redd.it/f963ov6omyhh1.png?width=1993&format=png&auto=webp&s=1db55d28467227cd85ab2fcc71c2019bf66ce825

It gets to Jun 9

https://preview.redd.it/q04jn21smyhh1.png?width=847&format=png&auto=webp&s=2739d05c73a52047da67223b32c2775bc3a76db2

Then it jumps to Jul 31

https://preview.redd.it/9lkui7htmyhh1.png?width=1140&format=png&auto=webp&s=9004a4b3787e6f3cd0df151df1058b4947a995e6

What kind of scaling is this?

----

Here's another one

https://preview.redd.it/a30fkcvznyhh1.png?width=1995&format=png&auto=webp&s=ca48d80e620afc6a768a80a06e54f506ffd68d02

Goes from Nov 2025. Then at the right Mar jumps to Jul

I bought a car new in 2022 and registration expires February 2027 in NSW

this is the 5th year so will I need a pink slip when renewing in February 2027?

reason I'm asking early is because I'm due for a service and I want to get the pink slip done at the service rather than separately because mechanics try to rip you off if you go in asking only for a pink slip.

• new GL.iNet Beryl AX (GL-MT3000) 192.168.8.1
• Main Router: ASUS RT-AX86U Pro 192.168.1.1
• Local DNS: Synology NAS 192.168.1.10

Steps:

Beryl AX via Repeater mode to my main ASUS private Wi-Fi network

Has connection (I can see it in the ASUS wireless log), but it gets absolutely No Internet.

does not show up in the ASUS Client List

Beryl AX to my ASUS Guest Network

shows connection to Internet and everything fine

but I cannot access the web interface due to AP isolation on ASUS

current settings are mainly at defaults

• DNS Rebind Protection OFF
• Override DNS Settings for All Clients OFF
• tried setting Custom DNS 1.1.1.1 - Beryl still gets no Internet

Beryl AX connected to LAN

connected to LAN cable into the WAN port

• it can get online
• it has an IP
• I cannot access the web interface from that IP

final goal

I want to get tailscale set up on this router but it's not installed by default and help does not work: https://www.gl-inet.com/blogs/blog/access-your-glinet-router-remotely-manage-it-from-anywhere

There is no Applications > Tailscale

I'm based in Australia and everything is more expensive here. Including going to the driving range.

I'm considering setting a home simulation area but our houses are much smaller than in the States So it will have to be something I set up in the living room and take down each time. That's the only space I have which is large enough. even there we are only talking about irons there is no space for a driver.

I saw a lot of launch Mon come with subscriptions. At my level and I'm playing with a child, I think what we want is carrier distance and launch angle. Everything else such as dispersion would be nice to have.

I'm a bit wary about subscriptions because everyone you to pay them 'a coffee a day' and I don't drink 100 coffees a day.

MLM2PRO seems to be recommended as a budget home version

what are your thoughts and recommendations?

https://preview.redd.it/aq7j5c6wokhh1.png?width=792&format=png&auto=webp&s=aaa69ef2c27acf930a2f2b3fa1bac5ee0be2898f

Saw things like this, thought would save shanks etc.

But what if your ball hits the back poles exactly? won't it bounce back at 90% power and kill you?

I want side walls as using in room with furniture etc

I have a PD charger and 100w cable

https://zyrontech.com.au/products/usb-c-charger-100w-gan-charger

But I'm getting 25W according to the cable.

What else do I need?

so you have a long two hour movie or something

you do cut without re encoding and take some short snippets

and then you take all of those cut videos and do a merge

what settings do you have to use in each state so that it works properly?

sometimes it works and sometimes you get a problem at the joins even though the individual files play fine

I have a 5 hybrid which is too long for my child. But it's also a spare.

I wanted to see if this is something I could cut myself, or am I asking for trouble?

what gear do I need?

I had Home Assistant running with Google Home using my own domain name like ha.domain.com.

I moved ISP I don't have a static I anymore So I moved to using tailscale. HA is fine, ha.x.ts.com. I can access it from outside and I've set the exceptions for the firewall.

I tried pulling the tail scale name into google developer for the Google Home and Home Assistant project. but it doesn't seem to actually update the project and it's still trying to connect using the old URL. when I try to link the test project in Google Home I can see it's trying to connect to the old URL which doesn't exist anymore

is there any trick to doing this?

Still quite new with a cavity back sand wedge.

In yt and tutorials, etc I saw some with a what seems like a lot more bounce. Wouldn't those be easier to hit than a cavity with less bounce?

Stuff that looks like this:

https://preview.redd.it/pxqj1rr9wsbh1.png?width=711&format=png&auto=webp&s=a2ac513225963c99ff5c98a032478763103ec096

https://preview.redd.it/y50ue6wawsbh1.png?width=570&format=png&auto=webp&s=7b342420b622f6f5e3f4be405073fe36e6303376

They look like they'd really glide across the ground, while a smaller narrower bounce feels like it digs into the ground.

Is this a thing, or just camera angles? Is there a rule on how wide that can be?

Carbon Fiber Photography Monopod 5564

this comes with a ball head and I'm using it with a DSLR

I can't seem to get it to move smoothly

for example the last decade I've been using a few acratech heads

I can tighten it so that it keeps the camera still but so that I can still move the camera if I apply extra force. It can move pretty smoothly for small adjustments

the monopod comes with a ball head and the panning is smooth and fluid

I can tighten and loosen the head knob. but I cannot make it grip hard enough so that I can still move the head

whenever I try to do this it will actually move in jerky movements, like there's something

and it's not just the initial movement

is it supposed to not be able to move smoothly? ie is moving smoothly an extra feature that is not available in normal heads?

I had this question before I bought my machine and couldn't find any answers. I found threads like https://www.reddit.com/r/karaoke/comments/15boig6/inandon_music_download_subscriptions/ and I thought now I'm able to give you real world experience after a year of ownership.

I bought this from China thinking it was our solution to having different people liking songs from different countries.

But apart from Chinese mainland songs and English songs, the selections are terrible.

Back to the download subscriptions though.

The promise is that you get lifetime unlimited updates through the cloud server in low speed, and you have a vip high speed subscription for the first year.

here's the truth:

The first year you can download in high speed which is about 4-5MB/s. We have 500mbps internet. So this is the server cap.

but it doesn't work all the time

• we found it would worth a while and then it would stop working going to 0-10kb/s
• it's not the server being busy because we can leave it for a few days and it's still at that speed
• after getting onto support and going through all the troubleshooting, They would flip a switch on their end
• and then they asked us to reboot our machine and then suddenly it works at full speed again

so clearly there is some sort of login with our machine serial number to their back end and even though we are within the first year VIP it has some sort of limitation that they flip on and off

after we did this for couple of months (honestly we only use this machine once every few weeks)

• they said that we were downloading too many songs
• so I asked them how many is too many and they wouldn't tell me
• so the next time they fixed everything I only downloaded 50 songs that day
• and then it worked the next day so I thought OK another 50
• and then it stopped working the 3rd day and I had to go through support again

eventually support told me there was a limit of 200 songs per day on Beijing Time

• they said this resets every day
• this is blatantly untrue because I left the machine off for four months and turned it on and it was at 0-10kb/s
• I went through a few more tests counting exactly how many songs I downloaded
• I download three songs and then wait two days and then 10 songs and then wait a week
• after a few weeks it stopped again
• I believe that is not a 200 song a day but when you cumulatively down 200 songs, the system shuts off And then you have to call them again
• but in any case it does not reset after 24 hours. No matter how many times they claim it does

support is just a support desk and they don't really know the answers

basically you go through their script and then they talk to someone in the actual company who fixes the network

any other questions such as not being able to type in any other language they cannot answer and they will say they get back to you which as you can imagine they do not.

---

So anyway eventually we ran out of our one year of subscription. There were a few periods where we just download a handful of songs a day and then it worked for a couple of weeks. There were also many periods where we didn't touch the machine for a month.

Since the selection of songs were small outside the two languages, We thought about continuing to use it at low speed without paying for more subscription.

a low speed connection is capped at 10kb/s - but I don't think that is true

I'm outside my VIP time now and when I turn on the machine it flashes 10kb/s. The problem is it does not stay at 10kb/s. It sometimes drops to 0kb/s. Sometimes the speed just disappears completely.

You can see a progress percentage next to the song So when you see that it is not listing something or it is stuck at 12% for an hour, and then you know it's actually not downloading.

So basically as low speed is no downloads plus small bursts of 10kb/s. Say if I was in a race and time stopped most of the time and then I drive at 10km/s for a second and then I stopped for another 10 seconds, my average speed is not 10km/s.

This is the same as the low speed when we had in the VIP subscription period. in other words it's not a network error but just that our VIP subscription was not tracking for some reason.

So while technically yes we have unlimited downloads for the rest of our lives each song takes possibly a day to download. I would call this deceptive advertising if not worse. There is no way you can call this a usable solution.

After a few hours on support - they keep giving me form answers and suggesting I subscribe to high speed downloading.

eventually they admitted that the 10 kilobits per second cap is the max for low speed, and that we should not expect any more unless we subscribe

so

technically you have music downloads but practically you do not.

• If you buy one of these machines you need to sit down with your family and download everything you want within the first year.
• when something doesn't work you don't sit around and hope it works again later you have to get on support and get them to fix it right away
• we would think it would fix itself in a few days and then we'll be busy with our lives and not use it for three weeks
• that way we wasted our whole year of VIP Basically we've spent maybe 10 days using it and then another 15 days downloading in preparation for the days when we could use it
• you might consider buying from a place you can return it even if it costs more than buying direct from China

---

Conclusion

The way I thought I would use this is that the first year we would download the songs we like from different countries and use the VIP. And then after that we would have most of the songs that we want in there already. We could live with a low speed download for the occasional one or two new songs that we want. We don't really follow the latest music so we did not imagine there would be any problems.

The reality, we were plagued with issues using the machine and actually finding the songs in the first year. Mainly issues with entering Japanese or Korean. So we ended up not having much time looking for songs in the first place. And then with the problems above in the blink of an eye our first year was gone. We have a machine that does not live up to our expectations, and cannot handle guests who come and order new songs.

Have you had any different experiences? I wonder if there is a problem with some sort of Geo blocking with Australia, or whether it's the same for everyone. I have a friend in Asia who says they are only using low speed but they can get through their whole list of downloads if they leave it overnight.

https://preview.redd.it/xqqgbpc1wn6h1.png?width=155&format=png&auto=webp&s=eb8f96702ec64c23a43ea3cc0e4877e338569f7c

can I get rid of this in charts?

I click to select a row, not to trade.

HP Z24m G3 QHD Conferencing Display, windows 11

Does anyone know where we can download the HP Presence video software? because HP does not know where it is.

--------------------------

rant below:

I have the above display has my second display and I use it in portrait orientation

I used HP presence video crop my camera view. mainly so that it shows my head instead of having the top of my head cut off due to the height of the monitor

it suddenly stopped working after I did a windows security and .net update.

https://support.hp.com/au-en/drivers/hp-z24m-g3-qhd-conferencing-display/2101219544

in the software page you can only get the firmware and the HP display Centre software. which I did update anyway and it didn't help.

I couldn't find the HP presence video software anywhere so I went on the support. After half an hour talking to this idiot, Telling them exactly everything I've tried and what I've updated, he asked me what my serial number was.

my serial number is literally the first thing I pasted into the chat

then he kept asking me things that I had already anticipated and put in the chat. I pointed out I had answered everything and they needed only to scroll up and read instead of trying to paste the next form question.

he apologized as call centre people do.

then he asked me when this started happening. the message above that was a screen shot of my settings and the message above that was literally me saying it stopped working after I did a Windows update on a security update today. so literally the very message before.

it's time like this I would rather talk to an LMM

after the 5th time asking him if he is able to send me the link to the software or not I asked him to put me to a supervisor, which he made some excuses equivalent to no.

something About Business Hours. We are in business hours

I said I was not going to talk to him again until a supervisor came. He was silent for about 10 minutes.

I asked him whether he could send me that single link to the software or whether he's gonna start asking me to reboot and reset my browser cookies.

guess what he asked me to do next?

an hour after he was still trying to send me links to software that I showed him I had already installed both in words and in screenshots.

he sent me links to the firmware and HP display centre where I literally sent him a screenshot that I was already on the page and that I had already installed it again.

this could be a stand comedy skit

buying HP is like buying something with no support

there's nowhere to reach a human who's not an idiot