u/TheSpanishSteed

I've collected some high end CNC parts in hopes of making my own CNC machine and I think im going to bite the bullet and sell them all.

Velmex BiSide Linear Rails and premounted Nema23 motors, aluminum Extrusion for the frame, water cooled spindle with VFD, etc. All the wiring, connectors, and screws/mounts necessary to throw the whole thing together.

All brand new.

I think the only things missing are the motor controllers and the controller to take in the g code.

Where on earth can I sell it? I know its not ideal on this sub to say so, but I dont have the time to make a CNC machine, and my business in a deeper need for a CNC versus using a friends CNC machine on his off days.

Ive heard Ebay, but that seems like it doesn't make sense.

I know it might be a dirty question to a subreddit to ask this. But I have a ton of parts from what I was hoping to have be my own CNC build. Over a year later and I haven't had much time to build one, but ive needed one more and more versus borrowing my friends CNC.

Is there anyone here local to Montana that builds them? Especially if i supply parts? Its not 100% there, yet, I know im missing a few things but ideally we can chat about what's missing and I can get those parts to you and we can work something out.

I know it might be a dirty question to a subreddit to ask this. But I have a ton of parts from what I was hoping to have be my own CNC build. Over a year later and I haven't had much time to build one, but ive needed one more and more versus borrowing my friends CNC.

Is there anyone here local to Montana that builds them? Especially if i supply parts? Its not 100% there, yet, I know im missing a few things but ideally we can chat about what's missing and I can get those parts to you and we can work something out.

Hey all!

I was planning to build my own CNC, but im finding myself with less and less time to make one, so im considering selling all the parts in hopes to buy one thats a little closer to turn key ready.

The challenges I face:

I need a 2 x 3 ft CNC, minimum 4" Z axis travel height.

I need it to be able to run on 115/120V (I have a 80mm water cooled spindle with mounting that I could keep to prevent the dreaded upgrade cost)

It needs to cut wood, and ocassionally small aluminum parts.

I dont have a major need for it to come with a table, I can build one out of Delron or some from of strong plastic, since I plan to build a vac table for it anyway.

Any suggestions?

Ideal Budget would be $2,000 liquid cash, or sub $4000 on a payment plan like Affirm. Willing to go up to $5,000, but it needs to check all the boxes and then some.

Hey all, took my QC on its first with zero modifications and noticed two things right away.

For context, im a bassist, plugging into QC, straight to House sound. No pedals in between and plugged into a power conditioner (no power supply outside of factory stock)

1: when switching the presets, theres a noticeable lag and slight shift to the sound before the next setting comes in. Its for every sound ive put together, but its only a problem when I have to switch from section to section (especially when im having to do so quickly) if I have a moment between sections or songs, its not a big problem compared to switching from note to note.

2: though incredibly small and light, its interesting travelling with the QC in a gig bag. It almost feels like its barely protected, and that sitting in a gig bag in a sprinter van is asking for it to break easily. Has anyone found some travel friendly work around to taking your instrument and QC? Maybe some form of hardshell care big enough for the two and cables? Ill do my best to avoid a pedalboard if I can manage it, but i can see the inevitable need to be tidy coming to brew.

Edit: i realize i worded this poorly for point #1. I have one preset, and utilize all 8 scenes within said preset.

My preset stays on, in some form of stomp mode (when you swipe the screen up and all 8 scenes are on one screen) and i tap through the 8 through the set (A-H).

I dont change the presets within songs, but just change the scenes, sorry.

Edit 2: SOLVED. Thank you.

For the cases, ill likely purchase a larger gun case to fit my bass and pedalboard thanks all.

I started a book club a few months ago and im opening it back up to the public.

We vote on horror books, read em, and gossip about their and other things.

Its great, come join. Book nominations are now open.

Hey all. Id love to ask about this as a novice bagel maker who would love to make better looking bagels.

I see a ton of photos of bagels that look incredible, but id love to ask about recipes for bagels too!

I know in some subs I follow you need to post the methods with the photos ans id be curious ask why that doesn't often exist here too.

Hey all. So i have a client in Ithaca, NY who needs a repair on one of my instruments i made for him.

Is there someone in town that can take the job?

The wiring needs to be adjusted, and I can walk you through the process, along with pay you directly.

The sooner the better. Thanks

Hey all!

About a week ago, I posted a poll about building a bass guitar.

Id like to offer the results, after about 40 voting participants.

Enjoy (:

https://www.reddit.com/r/BassGuitar/s/1sGr9nZySN

Hey all!

About a week ago, I posted a poll about building a bass guitar.

Id like to offer the results, after about 40 voting participants.

Enjoy (:

https://www.reddit.com/r/BassGuitar/s/1sGr9nZySN

Hey all. Another person looking to make the switch from pedals to a DSP (Quad Cortx Full Size).

I have some questions I couldn't quite get answered im hoping to solve here:

- My friend has a QC. Would i be able to copy my pedal settings to his account and then transfer them to mine if i got one? I want to avoid the buying the QC and then selling pedals part, or the selling pedals and never having those settings copied for the QC.

- Can i make duplicates on a thumb drive as a back up?

- seeing some pedals are downloaded already, are they fully adjustable for the QC? Are the pedals I copy fully adjustable too? Or are they copied as the settings only and can only be adjusted as more or less of that pedal sound?

Hey all! I've had a horror themed book club going for the last few months, and im opening it back up to a wider group of horror lovers.

New changes:

- I have a "digital book club" section now. For those who cant make book club, or dont live in Bozeman. You can discuss the book club book online with the rest of the humans who have joined. More inclusive, and friendlier to the horror fans.

Book nominations for the next meeting are now live!